Loading...
Loading...
Loading...
Loading...
Weaver
The Weaver Premium MSR 1-Piece Picatinny-Style Scope Mount with Integral Rings is purpose-built for modern sporting rifles that demand reliability and precision. This integrated mount combines a solid picatinny base with factory-installed rings in a single, rigid assembly—no separate components to align or fiddle with. If you're running an MSR and want to get glass mounted fast without compromising accuracy or durability, this is a straightforward choice that handles the job without excess weight or complexity.
Built from 7075-T6 aircraft-grade aluminum, the mount is engineered to withstand hard use. The Type III hardcoat anodized matte-black finish resists corrosion and glare, while the forward cantilever geometry positions your optic at an ergonomic height optimized for MSR ergonomics. The design is clean and intentional—edges are slightly radiused to prevent snagging on gear or during handling. At just 6 ounces, it adds minimal bulk to your setup.
Weaver engineered this mount with dual recoil lugs that lock firmly into your picatinny rail, paired with Torx-head fasteners for secure, repeatable mounting. The clamping force reaches 3600 lbs—a specification that speaks to how aggressively this mount holds your optic in place under recoil. Whether you're building a hunting rifle, a competition platform, or a tactical setup, the rigidity here is genuinely impressive for the weight.
The integrated ring design means fewer potential failure points and a cleaner sight line to bore. Available in both 1-inch and 30mm tube sizes, it adapts to your optic choice without requiring additional parts or custom engineering.
| Construction Material | 7075-T6 aircraft-grade aluminum |
| Finish | Type III hardcoat anodized matte black |
| Weight | 6 oz |
| Clamping Force | 3600 lbs |
| Recoil Lugs | Dual lugs with picatinny base |
| Fastener Type | Torx-head screws |
| Tube Diameter Options | 1 inch or 30mm |
| Design Type | 1-piece integrated mount with integral rings |
| Mounting Style | Picatinny-style rail |
The Weaver Premium MSR mount is available in two versions: one for 1-inch scope tubes and one for 30mm tubes. Choose the diameter that matches your optic.
Yes. This mount features a picatinny-style base and dual recoil lugs designed to lock into standard picatinny rails found on most MSR upper receivers and rail systems.
Yes. The name "1-Piece Mount with Integral Rings" means the rings are factory-installed as part of the assembly. You don't need to source or install separate rings—just mount the base to your rail and install your optic into the integrated rings.
The mount weighs 6 ounces, making it a lightweight option that won't add significant bulk to your rifle.
Weaver
The Weaver Premium MSR 1-Piece Picatinny-Style Scope Mount with Integral Rings is purpose-built for modern sporting rifles that demand reliability and precision. This integrated mount combines a solid picatinny base with factory-installed rings in a single, rigid assembly—no separate components to align or fiddle with. If you're running an MSR and want to get glass mounted fast without compromising accuracy or durability, this is a straightforward choice that handles the job without excess weight or complexity.
Built from 7075-T6 aircraft-grade aluminum, the mount is engineered to withstand hard use. The Type III hardcoat anodized matte-black finish resists corrosion and glare, while the forward cantilever geometry positions your optic at an ergonomic height optimized for MSR ergonomics. The design is clean and intentional—edges are slightly radiused to prevent snagging on gear or during handling. At just 6 ounces, it adds minimal bulk to your setup.
Weaver engineered this mount with dual recoil lugs that lock firmly into your picatinny rail, paired with Torx-head fasteners for secure, repeatable mounting. The clamping force reaches 3600 lbs—a specification that speaks to how aggressively this mount holds your optic in place under recoil. Whether you're building a hunting rifle, a competition platform, or a tactical setup, the rigidity here is genuinely impressive for the weight.
The integrated ring design means fewer potential failure points and a cleaner sight line to bore. Available in both 1-inch and 30mm tube sizes, it adapts to your optic choice without requiring additional parts or custom engineering.
| Construction Material | 7075-T6 aircraft-grade aluminum |
| Finish | Type III hardcoat anodized matte black |
| Weight | 6 oz |
| Clamping Force | 3600 lbs |
| Recoil Lugs | Dual lugs with picatinny base |
| Fastener Type | Torx-head screws |
| Tube Diameter Options | 1 inch or 30mm |
| Design Type | 1-piece integrated mount with integral rings |
| Mounting Style | Picatinny-style rail |
The Weaver Premium MSR mount is available in two versions: one for 1-inch scope tubes and one for 30mm tubes. Choose the diameter that matches your optic.
Yes. This mount features a picatinny-style base and dual recoil lugs designed to lock into standard picatinny rails found on most MSR upper receivers and rail systems.
Yes. The name "1-Piece Mount with Integral Rings" means the rings are factory-installed as part of the assembly. You don't need to source or install separate rings—just mount the base to your rail and install your optic into the integrated rings.
The mount weighs 6 ounces, making it a lightweight option that won't add significant bulk to your rifle.
