Loading...
Loading...
Loading...
Loading...
Weaver
The Weaver Mounts 48386 Precision 30mm Medium Matte rings are American-made scope rings built for hunters and shooters who demand rock-solid, zero-shift performance. These medium-height rings are engineered to mount 30mm scopes securely to Weaver or Picatinny-style rails and bases without the frustration of point-of-aim shift between shots. Machined from 7075-T6 aluminum and finished with Type III hardcoat anodize, they're lightweight yet robust enough to handle the recoil of serious hunting rifles or range guns day in and day out.
What sets Weaver's precision rings apart is attention to the details that matter. A built-in recoil lug locks the rings to your rail, preventing creep under recoil. Durable Torx head cap screws—torqued to Weaver's recommended spec of 25 in-lbs—are less prone to slip than conventional screws. The medium height works well with standard scope turrets and most common hunting rifle setups, and the sleek low-profile design keeps your overall rifle height reasonable for comfortable shooting positions.
These aren't fancy or over-engineered. They're straightforward, Made in America, and designed to let your scope stay put so you can focus on the shot. Whether you're zeroing a new hunting rifle, building a precision range gun, or upgrading rings that have let you down, Weaver Precision rings deliver the dependability you're paying for.
| Scope Tube Diameter | 30mm |
| Ring Height | Medium |
| Material | 7075-T6 Aluminum |
| Finish | Type III Hardcoat Anodize (Matte) |
| Rail Compatibility | Weaver and Picatinny |
| Fastener Type | Torx Head Cap Screws |
| Recommended Cap Screw Torque | 25 in-lbs |
| Recommended Clamp Screw Torque | 25 in-lbs |
These rings are designed for 30mm scopes mounted to Weaver or Picatinny-style rails and bases. If your rifle's rail is Weaver or Picatinny and your scope has a 30mm tube, they'll fit. Medium height is the standard for most hunting rifles; check your rifle's manual or measure the rail height if you're unsure.
Weaver recommends 25 in-lbs for both the cap screws (top clamps) and clamp screws (side fasteners). A basic torque wrench or screwdriver with a feel for light, firm pressure will get you there. Over-torqueing can strip aluminum or crack the scope tube, so don't guess—use a torque wrench if you have one.
Ring height is measured from the rail to the center of the scope tube. Medium height is the most common choice for hunting rifles and places the scope at a natural, comfortable cheek weld for most shooters and stock designs. Taller or shorter options are available separately if your setup calls for it.
Yes. These rings are engineered to work with both Weaver and Picatinny-style rails and bases, so you have flexibility in your rifle platform choice.
Weaver
The Weaver Mounts 48386 Precision 30mm Medium Matte rings are American-made scope rings built for hunters and shooters who demand rock-solid, zero-shift performance. These medium-height rings are engineered to mount 30mm scopes securely to Weaver or Picatinny-style rails and bases without the frustration of point-of-aim shift between shots. Machined from 7075-T6 aluminum and finished with Type III hardcoat anodize, they're lightweight yet robust enough to handle the recoil of serious hunting rifles or range guns day in and day out.
What sets Weaver's precision rings apart is attention to the details that matter. A built-in recoil lug locks the rings to your rail, preventing creep under recoil. Durable Torx head cap screws—torqued to Weaver's recommended spec of 25 in-lbs—are less prone to slip than conventional screws. The medium height works well with standard scope turrets and most common hunting rifle setups, and the sleek low-profile design keeps your overall rifle height reasonable for comfortable shooting positions.
These aren't fancy or over-engineered. They're straightforward, Made in America, and designed to let your scope stay put so you can focus on the shot. Whether you're zeroing a new hunting rifle, building a precision range gun, or upgrading rings that have let you down, Weaver Precision rings deliver the dependability you're paying for.
| Scope Tube Diameter | 30mm |
| Ring Height | Medium |
| Material | 7075-T6 Aluminum |
| Finish | Type III Hardcoat Anodize (Matte) |
| Rail Compatibility | Weaver and Picatinny |
| Fastener Type | Torx Head Cap Screws |
| Recommended Cap Screw Torque | 25 in-lbs |
| Recommended Clamp Screw Torque | 25 in-lbs |
These rings are designed for 30mm scopes mounted to Weaver or Picatinny-style rails and bases. If your rifle's rail is Weaver or Picatinny and your scope has a 30mm tube, they'll fit. Medium height is the standard for most hunting rifles; check your rifle's manual or measure the rail height if you're unsure.
Weaver recommends 25 in-lbs for both the cap screws (top clamps) and clamp screws (side fasteners). A basic torque wrench or screwdriver with a feel for light, firm pressure will get you there. Over-torqueing can strip aluminum or crack the scope tube, so don't guess—use a torque wrench if you have one.
Ring height is measured from the rail to the center of the scope tube. Medium height is the most common choice for hunting rifles and places the scope at a natural, comfortable cheek weld for most shooters and stock designs. Taller or shorter options are available separately if your setup calls for it.
Yes. These rings are engineered to work with both Weaver and Picatinny-style rails and bases, so you have flexibility in your rifle platform choice.
