Loading...
Loading...
Loading...
Loading...
Warne Scope Mounts
The Warne MSR Super High Skeletonized 34mm scope mount in dark earth finish is purpose-built for AR-pattern rifles where a higher optical axis and a cleaner, lighter platform matter. If you're running modern sporting rifle setups that demand extra clearance—whether for night vision compatibility, gas mask use, or bulky ancillary gear—this cantilever mount positions your optic at 1.9 inches above the rail while maintaining the return-to-zero reliability Warne shooters expect. The skeletonized design cuts weight without sacrificing the rigid, repeatable performance you need for accurate shooting.
Built from 6061 T6 aluminum, this single-piece mount combines lightweight construction with structural integrity. Steel threaded inserts throughout ensure steel-on-steel contact at every fastening point—a detail that matters when you're counting on consistent scope positioning under recoil. The forward cantilever geometry positions your scope ahead of the receiver for unobstructed AR accessory mounting and gives you the sight picture and head position modern tactical and hunting rifles demand.
Whether you're a competition shooter, patrol-rifle enthusiast, or hunter who values a heads-up shooting geometry, this mount delivers the clearance and durability that serious MSR setups require. The dark earth finish blends with modern rifle builds and resists glare without drawing attention.
| Mount Type | Cantilever, single-piece |
| Ring Diameter | 34mm |
| Optical Center Height | 1.9 inches above rail |
| Cantilever Extension | Approximately 2 inches forward |
| Material | 6061 T6 aluminum |
| Threaded Inserts | Steel |
| Finish | Dark Earth |
| Platform | AR-pattern rifles (Picatinny rail) |
The 1.9-inch measurement is the vertical distance from your AR rail to the center of the 34mm optic rings. This super-high position raises your sight picture, giving you a more upright shooting posture and extra clearance above the rifle for accessories, night vision mounts, or a gas mask.
Yes. This mount is designed for modern sporting rifles with Picatinny rail systems. It's engineered specifically for AR-pattern platforms.
Skeletonized design removes material where it isn't structurally needed, reducing overall weight while maintaining rigidity through critical support areas. You get a lighter mount without compromising durability or return-to-zero performance.
Yes. This Warne mount is return-to-zero capable, meaning if you remove it from the rail and remount it, your scope should return to the same point of aim.
Warne Scope Mounts
The Warne MSR Super High Skeletonized 34mm scope mount in dark earth finish is purpose-built for AR-pattern rifles where a higher optical axis and a cleaner, lighter platform matter. If you're running modern sporting rifle setups that demand extra clearance—whether for night vision compatibility, gas mask use, or bulky ancillary gear—this cantilever mount positions your optic at 1.9 inches above the rail while maintaining the return-to-zero reliability Warne shooters expect. The skeletonized design cuts weight without sacrificing the rigid, repeatable performance you need for accurate shooting.
Built from 6061 T6 aluminum, this single-piece mount combines lightweight construction with structural integrity. Steel threaded inserts throughout ensure steel-on-steel contact at every fastening point—a detail that matters when you're counting on consistent scope positioning under recoil. The forward cantilever geometry positions your scope ahead of the receiver for unobstructed AR accessory mounting and gives you the sight picture and head position modern tactical and hunting rifles demand.
Whether you're a competition shooter, patrol-rifle enthusiast, or hunter who values a heads-up shooting geometry, this mount delivers the clearance and durability that serious MSR setups require. The dark earth finish blends with modern rifle builds and resists glare without drawing attention.
| Mount Type | Cantilever, single-piece |
| Ring Diameter | 34mm |
| Optical Center Height | 1.9 inches above rail |
| Cantilever Extension | Approximately 2 inches forward |
| Material | 6061 T6 aluminum |
| Threaded Inserts | Steel |
| Finish | Dark Earth |
| Platform | AR-pattern rifles (Picatinny rail) |
The 1.9-inch measurement is the vertical distance from your AR rail to the center of the 34mm optic rings. This super-high position raises your sight picture, giving you a more upright shooting posture and extra clearance above the rifle for accessories, night vision mounts, or a gas mask.
Yes. This mount is designed for modern sporting rifles with Picatinny rail systems. It's engineered specifically for AR-pattern platforms.
Skeletonized design removes material where it isn't structurally needed, reducing overall weight while maintaining rigidity through critical support areas. You get a lighter mount without compromising durability or return-to-zero performance.
Yes. This Warne mount is return-to-zero capable, meaning if you remove it from the rail and remount it, your scope should return to the same point of aim.
