Warne Mountain Tech 1-Piece Picatinny Base Matte Finish for Tikka T3 RiflesWarne Scope Mounts$67.99
Loading...
Loading...
Loading...
Loading...
Warne Scope Mounts
The Warne Mountain Tech 1-piece Picatinny base for Tikka T3 rifles with 20 MOA is built for hunters who understand that ultralight doesn't mean compromised rigidity. Machined from 7075-T6 aluminum and finished with mil-spec hardcoat anodizing, this single-piece base delivers the stiffness you need for repeatable scope alignment without the extra weight that drains your legs on a long stalk. The 20 MOA elevation built into the base gives you extended downrange reach without additional riser hardware—useful for long-range hunting or if your ballistics already demand an angle.
Warne engineered the Mountain Tech line around the backcountry reality: ounces add up over miles, and when the shot matters, your scope base can't be the weak link. The tapered T-15 Torx screws self-center during installation, reducing human error and speeding up repeatable setup. Black zinc-coated hardware resists weather and corrosion, while the anodized aluminum body handles brush, mud, and temperature swings without degradation. This base is compatible with standard Picatinny and Weaver-pattern rings, and meets NATO-STANAG specifications, so you have flexibility in your ring selection.
If you're building a Tikka T3 for mountain hunting or precision rifle work where a forgiving platform and confidence matter more than added complexity, this is the kind of detail that separates a rifle you trust in the field from one you're always second-guessing. Drop-in installation, clean design, proven materials.
| Mounting Style | 1-Piece Picatinny Base |
| Rifle Compatibility | Tikka T3 |
| Elevation | 20 MOA |
| Material | 7075-T6 Aluminum |
| Finish | Mil-Spec Hardcoat Anodized (Matte) |
| Hardware Finish | Black Zinc-Coated |
| Screw Type | Tapered T-15 Torx (Self-Centering) |
| Ring Compatibility | Picatinny and Weaver-Pattern |
| Standard Compliance | NATO-STANAG |
Yes, this base is designed specifically for the Tikka T3 platform. It mounts using the T3's standard base attachment points.
The 20 MOA built into this base adds permanent upward elevation, allowing your scope to reach higher magnifications and distances without needing a separate angle riser. It's useful for long-range hunting or if your ballistic trajectory already requires significant upward angle. If you don't need the extra elevation, a 0 MOA base may be a simpler choice.
This base features a Picatinny rail and is compatible with any standard Picatinny or Weaver-pattern rings. It meets NATO-STANAG specifications, giving you broad compatibility with rings from multiple manufacturers.
The supplier information does not include a weight specification. Contact Bosque Outdoors directly if weight is critical to your build decision.
Warne Scope Mounts
The Warne Mountain Tech 1-piece Picatinny base for Tikka T3 rifles with 20 MOA is built for hunters who understand that ultralight doesn't mean compromised rigidity. Machined from 7075-T6 aluminum and finished with mil-spec hardcoat anodizing, this single-piece base delivers the stiffness you need for repeatable scope alignment without the extra weight that drains your legs on a long stalk. The 20 MOA elevation built into the base gives you extended downrange reach without additional riser hardware—useful for long-range hunting or if your ballistics already demand an angle.
Warne engineered the Mountain Tech line around the backcountry reality: ounces add up over miles, and when the shot matters, your scope base can't be the weak link. The tapered T-15 Torx screws self-center during installation, reducing human error and speeding up repeatable setup. Black zinc-coated hardware resists weather and corrosion, while the anodized aluminum body handles brush, mud, and temperature swings without degradation. This base is compatible with standard Picatinny and Weaver-pattern rings, and meets NATO-STANAG specifications, so you have flexibility in your ring selection.
If you're building a Tikka T3 for mountain hunting or precision rifle work where a forgiving platform and confidence matter more than added complexity, this is the kind of detail that separates a rifle you trust in the field from one you're always second-guessing. Drop-in installation, clean design, proven materials.
| Mounting Style | 1-Piece Picatinny Base |
| Rifle Compatibility | Tikka T3 |
| Elevation | 20 MOA |
| Material | 7075-T6 Aluminum |
| Finish | Mil-Spec Hardcoat Anodized (Matte) |
| Hardware Finish | Black Zinc-Coated |
| Screw Type | Tapered T-15 Torx (Self-Centering) |
| Ring Compatibility | Picatinny and Weaver-Pattern |
| Standard Compliance | NATO-STANAG |
Yes, this base is designed specifically for the Tikka T3 platform. It mounts using the T3's standard base attachment points.
The 20 MOA built into this base adds permanent upward elevation, allowing your scope to reach higher magnifications and distances without needing a separate angle riser. It's useful for long-range hunting or if your ballistic trajectory already requires significant upward angle. If you don't need the extra elevation, a 0 MOA base may be a simpler choice.
This base features a Picatinny rail and is compatible with any standard Picatinny or Weaver-pattern rings. It meets NATO-STANAG specifications, giving you broad compatibility with rings from multiple manufacturers.
The supplier information does not include a weight specification. Contact Bosque Outdoors directly if weight is critical to your build decision.
