Warne Maxima 30mm Medium Matte Rings for Tikka Rifles - Permanent AttachWarne Scope Mounts$75.99
Loading...
Loading...
Loading...
Loading...
Warne Scope Mounts
The Warne Maxima Quick Detach 30mm Medium Rings for Tikka Rifles deliver the speed and precision you need when mounting and remounting optics on your precision rifle. Built specifically for Tikka actions, these matte-finish rings combine Warne's proven quick-detach engineering with a solid, repeatable hold that keeps your scope exactly where you zero it—and brings it back there every time you reinstall it. If you run multiple optics, hunt different rifles throughout the season, or simply value the flexibility of swapping glass without losing zero, quick-detach rings are the intelligent upgrade.
Quick-detach rings aren't just convenient—they're practical. A hunting trip might call for a lower-power wide-angle scope for brush hunting, then a high-magnification optic for long-range work. With these Warne rings, you make the switch in seconds without re-zeroing. The medium height is engineered for 30mm tubes, positioning your scope at the optimal cheek weld and sight line for most Tikka builds. The matte black finish resists glare and blends seamlessly with tactical or hunting setups.
Warne has built its reputation on rock-solid rings that hunters and shooters trust in the field. The Maxima line carries that legacy forward—precision-manufactured, repeatable, and backed by a brand that understands what happens when gear fails at 400 yards. Whether you're setting up a new rifle, upgrading an existing mount, or building out a modular optics system, these Tikka-specific rings deliver the dependability you expect at the range and in the field.
| Brand | Warne Scope Mounts |
| Product Line | Maxima Quick Detach |
| Tube Diameter | 30mm |
| Ring Height | Medium |
| Compatibility | Tikka Rifles |
| Mount Type | Quick Detach |
| Finish | Matte Black |
| MOA | 0 MOA |
Yes—these rings are designed specifically for Tikka rifle actions. Confirm your scope uses a 30mm tube before purchase.
Quick-detach rings are engineered for repeatable mounting. When properly installed and tightened, they will bring your scope back to the same point of impact. Always re-verify your zero after any scope removal, especially in the field.
These rings have 0 MOA of built-in cant or angle—they mount your scope parallel to the bore. This is the standard for most hunting and target rifles, unless you have a specific reason to require angled rings.
These rings are for 30mm scope tubes, which is the most common modern standard. Measure your scope tube diameter before ordering. Warne also makes quick-detach rings in 1-inch diameter if your optic uses that smaller standard.
Warne Scope Mounts
The Warne Maxima Quick Detach 30mm Medium Rings for Tikka Rifles deliver the speed and precision you need when mounting and remounting optics on your precision rifle. Built specifically for Tikka actions, these matte-finish rings combine Warne's proven quick-detach engineering with a solid, repeatable hold that keeps your scope exactly where you zero it—and brings it back there every time you reinstall it. If you run multiple optics, hunt different rifles throughout the season, or simply value the flexibility of swapping glass without losing zero, quick-detach rings are the intelligent upgrade.
Quick-detach rings aren't just convenient—they're practical. A hunting trip might call for a lower-power wide-angle scope for brush hunting, then a high-magnification optic for long-range work. With these Warne rings, you make the switch in seconds without re-zeroing. The medium height is engineered for 30mm tubes, positioning your scope at the optimal cheek weld and sight line for most Tikka builds. The matte black finish resists glare and blends seamlessly with tactical or hunting setups.
Warne has built its reputation on rock-solid rings that hunters and shooters trust in the field. The Maxima line carries that legacy forward—precision-manufactured, repeatable, and backed by a brand that understands what happens when gear fails at 400 yards. Whether you're setting up a new rifle, upgrading an existing mount, or building out a modular optics system, these Tikka-specific rings deliver the dependability you expect at the range and in the field.
| Brand | Warne Scope Mounts |
| Product Line | Maxima Quick Detach |
| Tube Diameter | 30mm |
| Ring Height | Medium |
| Compatibility | Tikka Rifles |
| Mount Type | Quick Detach |
| Finish | Matte Black |
| MOA | 0 MOA |
Yes—these rings are designed specifically for Tikka rifle actions. Confirm your scope uses a 30mm tube before purchase.
Quick-detach rings are engineered for repeatable mounting. When properly installed and tightened, they will bring your scope back to the same point of impact. Always re-verify your zero after any scope removal, especially in the field.
These rings have 0 MOA of built-in cant or angle—they mount your scope parallel to the bore. This is the standard for most hunting and target rifles, unless you have a specific reason to require angled rings.
These rings are for 30mm scope tubes, which is the most common modern standard. Measure your scope tube diameter before ordering. Warne also makes quick-detach rings in 1-inch diameter if your optic uses that smaller standard.
