Loading...
Loading...
Loading...
Loading...
Tenpoint
TenPoint Acu-X Rd carbon arrows are precision-engineered shafts built specifically for TenPoint's rail-less reverse-draw crossbow platform. These 20-inch arrows combine a high-performance carbon construction with TenPoint's spine-indexing manufacturing process—a technique that orients the arrow's spine in the optimal configuration proven to deliver maximum consistency and long-range accuracy from reverse-draw crossbows. If you're shooting a TenPoint rail-less system and want arrows that are dialed in for the platform, the Acu-X Rd is the matched solution.
The Acu-X Snap-On Nock is the standout innovation here. It locks onto your bowstring with an unmistakable audible click, confirming proper seating and eliminating lateral nock travel throughout the shot cycle—a key factor in precision accuracy at distance. Paired with industry-standard 2 Blazer vanes, these arrows deliver shot-to-shot consistency that compounds across extended ranges. The 16.5% forward of center (F.O.C.) geometry further enhances flight stability without sacrificing speed.
Quality control is built in. Every arrow is straightness-inspected to within .001 inch, and each 36-pack is weight-matched within 1-grain per arrow—the kind of consistency that matters when you're hunting or competing at distance. The 440-grain total weight (with the included 100-grain field point) pairs a 92-grain brass insert with the carbon shaft, balancing durability and performance.
Note: Acu-X Rd arrows are designed exclusively for TenPoint rail-less reverse-draw crossbows. If you're using a different platform, verify compatibility before ordering.
| Brand | TenPoint |
| Model | Acu-X Rd Carbon Arrows |
| Length | 20 inches |
| Total Weight | 440 grains (±1 grain, with 100-grain field point) |
| Insert Weight | 92-grain brass |
| Inside Diameter | .297 inch |
| Outside Diameter | .344 inch |
| Straightness Tolerance | .001 inch |
| Vanes | 2 Blazer |
| Nock | Acu-X Snap-On |
| Forward of Center (F.O.C.) | 16.5% |
| Pack Quantity | 36 arrows |
| Crossbow Compatibility | TenPoint rail-less reverse-draw crossbows only |
Acu-X Rd arrows are designed exclusively for TenPoint rail-less reverse-draw crossbows. The spine-indexing and engineering are specific to that platform. If you own a different crossbow model, these arrows are not the right choice.
Each pack contains 36 Acu-X Rd arrows, fully assembled with Acu-X Snap-On Nocks, 2 Blazer vanes, and 100-grain field points. The 92-grain brass insert is built into each shaft.
The total weight is 440 grains per arrow (including the 100-grain field point). All arrows in a pack are weight-matched within 1-grain of each other to ensure consistent performance from shot to shot.
Every arrow is inspected and guaranteed to be straight within .001 inch—an extremely tight tolerance that ensures consistent flight and accuracy, especially at longer ranges.
Tenpoint
TenPoint Acu-X Rd carbon arrows are precision-engineered shafts built specifically for TenPoint's rail-less reverse-draw crossbow platform. These 20-inch arrows combine a high-performance carbon construction with TenPoint's spine-indexing manufacturing process—a technique that orients the arrow's spine in the optimal configuration proven to deliver maximum consistency and long-range accuracy from reverse-draw crossbows. If you're shooting a TenPoint rail-less system and want arrows that are dialed in for the platform, the Acu-X Rd is the matched solution.
The Acu-X Snap-On Nock is the standout innovation here. It locks onto your bowstring with an unmistakable audible click, confirming proper seating and eliminating lateral nock travel throughout the shot cycle—a key factor in precision accuracy at distance. Paired with industry-standard 2 Blazer vanes, these arrows deliver shot-to-shot consistency that compounds across extended ranges. The 16.5% forward of center (F.O.C.) geometry further enhances flight stability without sacrificing speed.
Quality control is built in. Every arrow is straightness-inspected to within .001 inch, and each 36-pack is weight-matched within 1-grain per arrow—the kind of consistency that matters when you're hunting or competing at distance. The 440-grain total weight (with the included 100-grain field point) pairs a 92-grain brass insert with the carbon shaft, balancing durability and performance.
Note: Acu-X Rd arrows are designed exclusively for TenPoint rail-less reverse-draw crossbows. If you're using a different platform, verify compatibility before ordering.
| Brand | TenPoint |
| Model | Acu-X Rd Carbon Arrows |
| Length | 20 inches |
| Total Weight | 440 grains (±1 grain, with 100-grain field point) |
| Insert Weight | 92-grain brass |
| Inside Diameter | .297 inch |
| Outside Diameter | .344 inch |
| Straightness Tolerance | .001 inch |
| Vanes | 2 Blazer |
| Nock | Acu-X Snap-On |
| Forward of Center (F.O.C.) | 16.5% |
| Pack Quantity | 36 arrows |
| Crossbow Compatibility | TenPoint rail-less reverse-draw crossbows only |
Acu-X Rd arrows are designed exclusively for TenPoint rail-less reverse-draw crossbows. The spine-indexing and engineering are specific to that platform. If you own a different crossbow model, these arrows are not the right choice.
Each pack contains 36 Acu-X Rd arrows, fully assembled with Acu-X Snap-On Nocks, 2 Blazer vanes, and 100-grain field points. The 92-grain brass insert is built into each shaft.
The total weight is 440 grains per arrow (including the 100-grain field point). All arrows in a pack are weight-matched within 1-grain of each other to ensure consistent performance from shot to shot.
Every arrow is inspected and guaranteed to be straight within .001 inch—an extremely tight tolerance that ensures consistent flight and accuracy, especially at longer ranges.
