Loading...
Loading...
Loading...
Loading...
Tcs
The TCS AR-15 bore guide is a precision cleaning accessory designed to protect your rifle's barrel accuracy by keeping your cleaning rod perfectly centered. If you shoot an AR-15 or M-16 style rifle and want to avoid the rod contact that causes bore damage and accuracy drift over time, this tool belongs in your cleaning kit. It's straightforward to use: remove your upper receiver, pull the charging handle and extract the bolt carrier group, then insert the bore guide where the BCG normally seats. From there, you can run patches treated with TCS Bore Paste or solvent through with complete confidence that your rod is tracking straight down the center of your bore.
Built from anodized aluminum and equipped with rubber O-rings to ensure a snug fit, the TCS bore guide is made in the USA and works with most AR-15 and M-16 platform rifles in .223/5.56 caliber. It's the kind of simple, no-frills tool that pays dividends in barrel longevity and shot consistency—especially if you're doing regular maintenance or running high round counts at the range or in the field.
The bore guide is designed to work alongside TCS cleaning systems (rods and jags), though the core principle is universal: keeping metal away from your bore walls. Whether you're a competition shooter obsessing over precision, a hunter who depends on accuracy, or someone who just takes rifle maintenance seriously, this is one of those unglamorous tools that actually matters.
| Brand | TCS |
| Product Type | AR-15 Bore Guide |
| Caliber Compatibility | .223/5.56 |
| Platform Compatibility | AR-15, M-16 style rifles |
| Material | Anodized Aluminum |
| Seals | Rubber O-Rings |
| Origin | Made in USA |
The bore guide is designed for AR-15 and M-16 style rifles in .223/5.56 caliber. It fits most variants in these platforms.
Remove your upper receiver and extract the bolt carrier group by pulling the charging handle back. Insert the bore guide into the upper where the BCG normally sits. Center a patch treated with TCS Bore Paste or solvent on the back of the bore guide, then press it through using a TCS rod and jag. Repeat as needed with fresh patches.
The bore guide keeps your cleaning rod perfectly straight and centered, preventing it from contacting the sides of your barrel. This protects your bore from the wear and damage that reduce long-term accuracy.
The bore guide is designed to work with the TCS rod and jag system, though the principle of keeping your cleaning rod centered applies to any quality cleaning setup.
Tcs
The TCS AR-15 bore guide is a precision cleaning accessory designed to protect your rifle's barrel accuracy by keeping your cleaning rod perfectly centered. If you shoot an AR-15 or M-16 style rifle and want to avoid the rod contact that causes bore damage and accuracy drift over time, this tool belongs in your cleaning kit. It's straightforward to use: remove your upper receiver, pull the charging handle and extract the bolt carrier group, then insert the bore guide where the BCG normally seats. From there, you can run patches treated with TCS Bore Paste or solvent through with complete confidence that your rod is tracking straight down the center of your bore.
Built from anodized aluminum and equipped with rubber O-rings to ensure a snug fit, the TCS bore guide is made in the USA and works with most AR-15 and M-16 platform rifles in .223/5.56 caliber. It's the kind of simple, no-frills tool that pays dividends in barrel longevity and shot consistency—especially if you're doing regular maintenance or running high round counts at the range or in the field.
The bore guide is designed to work alongside TCS cleaning systems (rods and jags), though the core principle is universal: keeping metal away from your bore walls. Whether you're a competition shooter obsessing over precision, a hunter who depends on accuracy, or someone who just takes rifle maintenance seriously, this is one of those unglamorous tools that actually matters.
| Brand | TCS |
| Product Type | AR-15 Bore Guide |
| Caliber Compatibility | .223/5.56 |
| Platform Compatibility | AR-15, M-16 style rifles |
| Material | Anodized Aluminum |
| Seals | Rubber O-Rings |
| Origin | Made in USA |
The bore guide is designed for AR-15 and M-16 style rifles in .223/5.56 caliber. It fits most variants in these platforms.
Remove your upper receiver and extract the bolt carrier group by pulling the charging handle back. Insert the bore guide into the upper where the BCG normally sits. Center a patch treated with TCS Bore Paste or solvent on the back of the bore guide, then press it through using a TCS rod and jag. Repeat as needed with fresh patches.
The bore guide keeps your cleaning rod perfectly straight and centered, preventing it from contacting the sides of your barrel. This protects your bore from the wear and damage that reduce long-term accuracy.
The bore guide is designed to work with the TCS rod and jag system, though the principle of keeping your cleaning rod centered applies to any quality cleaning setup.
