Talley P0M714A Black Anodized Aluminum Tikka T3/T3X Picatinny Rail Mount 20 MoaTalley Manufacturing$49.10
Loading...
Loading...
Loading...
Loading...
Talley Manufacturing
The Talley P00714A is a precision Picatinny rail mount engineered for Tikka T3 and T3X bolt-action rifles. Built from 7000-series aluminum and finished with hard-coat anodizing, this American-made rail gives you a rock-solid mounting platform for modern scope rings and tactical optics. If you run a Tikka and want to upgrade from factory rings to a true Picatinny system—whether for long-range hunting, precision rifle work, or general accuracy—this rail delivers the rigidity and repeatability that matter when hits count.
Talley machines these rails to tight tolerances and fully adheres to MIL-STD-1913 Picatinny specifications, so any standard Picatinny-compatible scope ring will mount securely. The matte black anodizing is rated to 65 Rockwell hardness, protecting the aluminum from wear and corrosion through years of hunting and shooting. Unlike some budget rails, this is a full-length option that won't compromise your rifle's balance or sight picture.
Installation is straightforward: the rail ships with all necessary mounting screws (1/4 inch, 6-48 spec) and a T-15 wrench, so you can get behind glass quickly. Available in both 0 MOA and 20 MOA versions, you can dial in the angle that suits your shooting distance and preference.
| Brand | Talley Manufacturing |
| Model | P00714A |
| Finish | Matte Black Hard-Coat Anodize (65 Rockwell) |
| Material | 7000-Series Aluminum Alloy |
| Compatibility | Tikka T3 and T3X Bolt-Action Rifles |
| Rail Standard | MIL-STD-1913 Picatinny |
| Mounting Hardware | 1/4 inch 6-48 Screws with T-15 Wrench Included |
| MOA Options | 0 and 20 MOA |
| Country of Manufacture | USA |
Yes. The Talley P00714A is designed specifically for Tikka T3 and T3X bolt-action rifles and is engineered to the industry's tight manufacturing tolerances for a secure fit on these platforms.
Any optic mount or scope ring designed to the MIL-STD-1913 Picatinny standard will work, including Talley's own Picatinny scope rings and tactical mounts.
The rail comes with mounting screws (1/4 inch, 6-48 specification) and a T-15 wrench, so you have everything needed for installation.
That depends on your intended use and rifle setup. The 0 MOA version offers a flat plane, while 20 MOA provides a slight upward tilt that can help with long-range shooting and reduce the need for extreme elevation adjustments on your scope.
Talley Manufacturing
The Talley P00714A is a precision Picatinny rail mount engineered for Tikka T3 and T3X bolt-action rifles. Built from 7000-series aluminum and finished with hard-coat anodizing, this American-made rail gives you a rock-solid mounting platform for modern scope rings and tactical optics. If you run a Tikka and want to upgrade from factory rings to a true Picatinny system—whether for long-range hunting, precision rifle work, or general accuracy—this rail delivers the rigidity and repeatability that matter when hits count.
Talley machines these rails to tight tolerances and fully adheres to MIL-STD-1913 Picatinny specifications, so any standard Picatinny-compatible scope ring will mount securely. The matte black anodizing is rated to 65 Rockwell hardness, protecting the aluminum from wear and corrosion through years of hunting and shooting. Unlike some budget rails, this is a full-length option that won't compromise your rifle's balance or sight picture.
Installation is straightforward: the rail ships with all necessary mounting screws (1/4 inch, 6-48 spec) and a T-15 wrench, so you can get behind glass quickly. Available in both 0 MOA and 20 MOA versions, you can dial in the angle that suits your shooting distance and preference.
| Brand | Talley Manufacturing |
| Model | P00714A |
| Finish | Matte Black Hard-Coat Anodize (65 Rockwell) |
| Material | 7000-Series Aluminum Alloy |
| Compatibility | Tikka T3 and T3X Bolt-Action Rifles |
| Rail Standard | MIL-STD-1913 Picatinny |
| Mounting Hardware | 1/4 inch 6-48 Screws with T-15 Wrench Included |
| MOA Options | 0 and 20 MOA |
| Country of Manufacture | USA |
Yes. The Talley P00714A is designed specifically for Tikka T3 and T3X bolt-action rifles and is engineered to the industry's tight manufacturing tolerances for a secure fit on these platforms.
Any optic mount or scope ring designed to the MIL-STD-1913 Picatinny standard will work, including Talley's own Picatinny scope rings and tactical mounts.
The rail comes with mounting screws (1/4 inch, 6-48 specification) and a T-15 wrench, so you have everything needed for installation.
That depends on your intended use and rifle setup. The 0 MOA version offers a flat plane, while 20 MOA provides a slight upward tilt that can help with long-range shooting and reduce the need for extreme elevation adjustments on your scope.