Loading...
Loading...
Loading...
Loading...
Cylinder & Slide
The Cylinder & Slide Tactical II 4lb trigger pull kit gives you a clean, controllable break engineered for pistols built on Series 70-style frames. This is a complete trigger group overhaul—hammer, sear, disconnector, sear spring, and hammer spring—all precision-manufactured and pre-fitted to work right out of the box with minimal to no hand fitting required. Whether you're running a carry gun, a range workhorse, or a duty pistol, a properly tuned trigger is non-negotiable, and the Tactical II kit delivers the balance most shooters want: responsive enough for accurate fire, but with enough weight to prevent accidental discharge in high-stress situations.
Every component is wire EDM cut from bar stock, honed, polished, and heat treated for durability. The Tactical II hammer features relieved sides to reduce contact with the slide and minimize wear on your clothing or gear during carry. The sear is matched to the disconnector with precision geometry—correct angles, correct through-holes—so the trigger functions reliably without the need for careful hand fitting or tuning. The lighter sear spring works in concert with an 18-pound hammer spring to deliver that crisp 4-pound break without sacrificing ignition reliability or control.
Cylinder & Slide kits are tested on Series 70-style frames to confirm they'll produce the advertised pull weight consistently. If you're familiar with gunsmithing, you know that off-the-shelf trigger parts often require fitting and adjustment; these kits are built to eliminate that step. Drop them in, function-check, and go to work. The 4-pound pull is a sweet spot for shooters who want tactile feedback and fast follow-up shots without the light-trigger liability of a match or competition setup.
| Brand | Cylinder & Slide |
| Product | Tactical II Trigger Pull Kit |
| Pull Weight | 4 lb. |
| Hammer Spring | 18 lb. |
| Compatibility | Series 70-style frames |
| Kit Contents | Hammer, sear, disconnector, sear spring, hammer spring |
| Material | Heat-treated steel (EDM cut bar stock) |
The Tactical II kit is designed for Series 70-style frames and is tested to function with minimal or no fitting required. That said, 1911s can have variances in frame geometry depending on manufacturer and age. Cylinder & Slide designs these kits to drop in and work, but if you're not comfortable fitting trigger parts, having a gunsmith verify fit is always the safest approach.
A 4-pound pull is heavy enough to prevent accidental discharge during holstering, movement, or contact, but light enough to give you quick, accurate follow-up shots when you need them. The Tactical II is tuned for shooters who carry daily and also want to shoot accurately—it's a compromise between safety and performance, which is exactly what a carry gun needs.
The kit includes a Tactical II hammer with relieved sides, an ultra-match sear, a disconnector, a light sear spring, and an 18-pound hammer spring. That's everything needed to replace your entire trigger group.
Cylinder & Slide offers kits ranging from 3 pounds (Ultra Light Speed II, Warp Speed) up to 5 pounds (Professional). The Tactical II at 4 pounds sits in the middle—lighter than duty/carry kits at 4.5 pounds, but heavier than competition-grade options. It's the Goldilocks choice for most working guns.
Cylinder & Slide
The Cylinder & Slide Tactical II 4lb trigger pull kit gives you a clean, controllable break engineered for pistols built on Series 70-style frames. This is a complete trigger group overhaul—hammer, sear, disconnector, sear spring, and hammer spring—all precision-manufactured and pre-fitted to work right out of the box with minimal to no hand fitting required. Whether you're running a carry gun, a range workhorse, or a duty pistol, a properly tuned trigger is non-negotiable, and the Tactical II kit delivers the balance most shooters want: responsive enough for accurate fire, but with enough weight to prevent accidental discharge in high-stress situations.
Every component is wire EDM cut from bar stock, honed, polished, and heat treated for durability. The Tactical II hammer features relieved sides to reduce contact with the slide and minimize wear on your clothing or gear during carry. The sear is matched to the disconnector with precision geometry—correct angles, correct through-holes—so the trigger functions reliably without the need for careful hand fitting or tuning. The lighter sear spring works in concert with an 18-pound hammer spring to deliver that crisp 4-pound break without sacrificing ignition reliability or control.
Cylinder & Slide kits are tested on Series 70-style frames to confirm they'll produce the advertised pull weight consistently. If you're familiar with gunsmithing, you know that off-the-shelf trigger parts often require fitting and adjustment; these kits are built to eliminate that step. Drop them in, function-check, and go to work. The 4-pound pull is a sweet spot for shooters who want tactile feedback and fast follow-up shots without the light-trigger liability of a match or competition setup.
| Brand | Cylinder & Slide |
| Product | Tactical II Trigger Pull Kit |
| Pull Weight | 4 lb. |
| Hammer Spring | 18 lb. |
| Compatibility | Series 70-style frames |
| Kit Contents | Hammer, sear, disconnector, sear spring, hammer spring |
| Material | Heat-treated steel (EDM cut bar stock) |
The Tactical II kit is designed for Series 70-style frames and is tested to function with minimal or no fitting required. That said, 1911s can have variances in frame geometry depending on manufacturer and age. Cylinder & Slide designs these kits to drop in and work, but if you're not comfortable fitting trigger parts, having a gunsmith verify fit is always the safest approach.
A 4-pound pull is heavy enough to prevent accidental discharge during holstering, movement, or contact, but light enough to give you quick, accurate follow-up shots when you need them. The Tactical II is tuned for shooters who carry daily and also want to shoot accurately—it's a compromise between safety and performance, which is exactly what a carry gun needs.
The kit includes a Tactical II hammer with relieved sides, an ultra-match sear, a disconnector, a light sear spring, and an 18-pound hammer spring. That's everything needed to replace your entire trigger group.
Cylinder & Slide offers kits ranging from 3 pounds (Ultra Light Speed II, Warp Speed) up to 5 pounds (Professional). The Tactical II at 4 pounds sits in the middle—lighter than duty/carry kits at 4.5 pounds, but heavier than competition-grade options. It's the Goldilocks choice for most working guns.
