Loading...
Loading...
Loading...
Loading...
Swampfox Optics
Swampfox Optics
The Swampfox Optics Ultimate Red Dot Mounting Screw Pack solves one of the most frustrating problems in red dot sight installation: finding the right fasteners for your specific slide, adapter plate, or dovetail mount. Whether you're mounting a Swampfox Kingslayer, Liberty, Justice, or Sentinel to a factory slide or custom gunsmith cut, this comprehensive screw assortment takes the guesswork out of the job. Instead of hunting through hardware stores or waiting for special orders, you've got 14 complete four-screw sets covering the thread pitches and lengths you're most likely to need.
This pack includes five dedicated DIY sets featuring 14mm effective thread lengths—intentionally oversized so you can customize them to your exact requirements. Got a slightly different mount height or an unusual adapter plate? Grab a Dremel, belt sander, or file and trim them to fit. That flexibility means you're not limited to off-the-shelf solutions; you can dial in a truly custom installation. The small-head design of these T10 screws ensures they fit tight mounting pads without interference, and the precision thread pitches (6-32, 4-40, M3, M3.5, M4) cover the full range of modern red dot mounting standards.
Built for shooters who aren't afraid to get hands-on with their gear, the Ultimate Red Dot Mounting Screw Pack is essential if you're installing or swapping red dots across multiple firearms, working with different optic brands, or dealing with non-standard mounts. Keep one in your gunsmith box or reloading bench—it's the small investment that keeps your builds moving forward.
| Included Screw Sets | 14 sets (4 screws per set) |
| Thread Pitches | 6-32, 4-40, M3, M3.5, M4 |
| DIY Sets | 5 sets with 14mm effective thread length for custom fitting |
| Screw Head Type | T10 (Torx) |
| Compatible Optics | Swampfox Kingslayer, Liberty, Justice, Sentinel |
| Mounting Applications | Pistol slides, adapter plates, dovetail mounts, custom cuts |
The pack is designed for Swampfox Optics red dots, including the Kingslayer, Liberty, Justice, and Sentinel models. Because it includes multiple thread pitches and lengths, it covers most mounting scenarios for these optics across factory and custom slides.
Yes. The assortment covers the range of fasteners needed for factory slide cuts, adapter plates, dovetail mounts, and custom gunsmith work—that's why there are 14 different sets included.
Five of the sets feature oversized 14mm effective thread lengths, meant to be trimmed down with a Dremel, belt sander, or file to fit your specific mount height or non-standard installation. This lets you create a truly custom fit when standard lengths don't work.
You'll need a T10 Torx driver or wrench to install them. If you're using the DIY sets, you'll also need a cutting tool (Dremel, belt sander, file, or similar) to trim them to length.
The Swampfox Optics Ultimate Red Dot Mounting Screw Pack solves one of the most frustrating problems in red dot sight installation: finding the right fasteners for your specific slide, adapter plate, or dovetail mount. Whether you're mounting a Swampfox Kingslayer, Liberty, Justice, or Sentinel to a factory slide or custom gunsmith cut, this comprehensive screw assortment takes the guesswork out of the job. Instead of hunting through hardware stores or waiting for special orders, you've got 14 complete four-screw sets covering the thread pitches and lengths you're most likely to need.
This pack includes five dedicated DIY sets featuring 14mm effective thread lengths—intentionally oversized so you can customize them to your exact requirements. Got a slightly different mount height or an unusual adapter plate? Grab a Dremel, belt sander, or file and trim them to fit. That flexibility means you're not limited to off-the-shelf solutions; you can dial in a truly custom installation. The small-head design of these T10 screws ensures they fit tight mounting pads without interference, and the precision thread pitches (6-32, 4-40, M3, M3.5, M4) cover the full range of modern red dot mounting standards.
Built for shooters who aren't afraid to get hands-on with their gear, the Ultimate Red Dot Mounting Screw Pack is essential if you're installing or swapping red dots across multiple firearms, working with different optic brands, or dealing with non-standard mounts. Keep one in your gunsmith box or reloading bench—it's the small investment that keeps your builds moving forward.
| Included Screw Sets | 14 sets (4 screws per set) |
| Thread Pitches | 6-32, 4-40, M3, M3.5, M4 |
| DIY Sets | 5 sets with 14mm effective thread length for custom fitting |
| Screw Head Type | T10 (Torx) |
| Compatible Optics | Swampfox Kingslayer, Liberty, Justice, Sentinel |
| Mounting Applications | Pistol slides, adapter plates, dovetail mounts, custom cuts |
The pack is designed for Swampfox Optics red dots, including the Kingslayer, Liberty, Justice, and Sentinel models. Because it includes multiple thread pitches and lengths, it covers most mounting scenarios for these optics across factory and custom slides.
Yes. The assortment covers the range of fasteners needed for factory slide cuts, adapter plates, dovetail mounts, and custom gunsmith work—that's why there are 14 different sets included.
Five of the sets feature oversized 14mm effective thread lengths, meant to be trimmed down with a Dremel, belt sander, or file to fit your specific mount height or non-standard installation. This lets you create a truly custom fit when standard lengths don't work.
You'll need a T10 Torx driver or wrench to install them. If you're using the DIY sets, you'll also need a cutting tool (Dremel, belt sander, file, or similar) to trim them to length.
