Strike Industries Dual Folding Adapter - Picatinny Stock, Aluminum, BlackStrike Industries$187.95
Loading...
Loading...
Loading...
Loading...
Strike Industries
The Strike Industries Cheek Riser for Dual Folding Adapter is a drop-in accessory that bolts onto the Strike Dual Folding Adapter bar to give you a proper, repeatable cheek weld. If you're running a Dual Folding Adapter on your rifle and want to dial in consistent sight picture and accuracy without having to improvise a cheek rest, this riser solves that problem with five different height positions to match your natural shooting position and optic height.
What makes this cheek riser practical is flexibility. The unit offers five elevation options—ranging from 0.40 inches at the lowest flat setting up to 1.08 inches at the highest angled position—so you can match it to your scope, your face geometry, and your shooting style. That's low flat, mid, high flat, low angled, and high angled; pick the height that gives you the best repeatable anchor point. Installation is hassle-free: triblade thumb screws mean no tools needed to mount, adjust, or swap the riser between positions.
This is a purpose-built accessory for shooters who value consistency in accuracy work. Whether you're at the range stretching shots or hunting from a rest, a proper cheek weld eliminates variables. The direct-mount design keeps the footprint minimal and the profile low, and because it works only with the Strike Dual Folding Adapter, you get a clean, integrated fit without adapter stack-ups or wobble.
| Brand | Strike Industries |
| Mounting | Direct mount to Strike Dual Folding Adapter |
| Height Positions | 5 |
| Low Flat Height | 10.25 mm (0.40″) |
| Mid Height | 16.55 mm (0.65″) |
| High Flat Height | 23.55 mm (0.93″) |
| Low Angled Height | 20.46 mm (0.81″) |
| High Angled Height | 27.50 mm (1.08″) |
| Adjustment Mechanism | Triblade thumb screws |
| Tools Required | None |
This cheek riser is designed exclusively for the Strike Dual Folding Adapter bar. It will not work with other adapters or charging handle systems.
No. The riser uses triblade thumb screws that allow you to mount, remove, or swap between height positions without any tools.
The cheek riser offers five positions: low flat (0.40″), mid (0.65″), high flat (0.93″), low angled (0.81″), and high angled (1.08″) above the top of the adapter bar. You can choose the height that best matches your optic and shooting setup.
A proper cheek weld is essential for consistent sight picture and repeatability in precision shooting. This riser gives you a solid anchor point that you can replicate shot to shot, which directly supports accuracy and confidence in your shooting.
Strike Industries
The Strike Industries Cheek Riser for Dual Folding Adapter is a drop-in accessory that bolts onto the Strike Dual Folding Adapter bar to give you a proper, repeatable cheek weld. If you're running a Dual Folding Adapter on your rifle and want to dial in consistent sight picture and accuracy without having to improvise a cheek rest, this riser solves that problem with five different height positions to match your natural shooting position and optic height.
What makes this cheek riser practical is flexibility. The unit offers five elevation options—ranging from 0.40 inches at the lowest flat setting up to 1.08 inches at the highest angled position—so you can match it to your scope, your face geometry, and your shooting style. That's low flat, mid, high flat, low angled, and high angled; pick the height that gives you the best repeatable anchor point. Installation is hassle-free: triblade thumb screws mean no tools needed to mount, adjust, or swap the riser between positions.
This is a purpose-built accessory for shooters who value consistency in accuracy work. Whether you're at the range stretching shots or hunting from a rest, a proper cheek weld eliminates variables. The direct-mount design keeps the footprint minimal and the profile low, and because it works only with the Strike Dual Folding Adapter, you get a clean, integrated fit without adapter stack-ups or wobble.
| Brand | Strike Industries |
| Mounting | Direct mount to Strike Dual Folding Adapter |
| Height Positions | 5 |
| Low Flat Height | 10.25 mm (0.40″) |
| Mid Height | 16.55 mm (0.65″) |
| High Flat Height | 23.55 mm (0.93″) |
| Low Angled Height | 20.46 mm (0.81″) |
| High Angled Height | 27.50 mm (1.08″) |
| Adjustment Mechanism | Triblade thumb screws |
| Tools Required | None |
This cheek riser is designed exclusively for the Strike Dual Folding Adapter bar. It will not work with other adapters or charging handle systems.
No. The riser uses triblade thumb screws that allow you to mount, remove, or swap between height positions without any tools.
The cheek riser offers five positions: low flat (0.40″), mid (0.65″), high flat (0.93″), low angled (0.81″), and high angled (1.08″) above the top of the adapter bar. You can choose the height that best matches your optic and shooting setup.
A proper cheek weld is essential for consistent sight picture and repeatability in precision shooting. This riser gives you a solid anchor point that you can replicate shot to shot, which directly supports accuracy and confidence in your shooting.
