Loading...
Loading...
Loading...
Loading...
Shooter's Choice
A Shooter's Choice .22 Cal bore brush is a must-have cleaning tool for anyone running rimfire rifles, including .22 rimfire, .22-250, and .223/5.56mm platforms. This 3-inch brush features phosphor bronze bristles on an aluminum stem—a proven combination that scrubs fouling and carbon effectively without marring the precision surfaces inside your barrel. Whether you're maintaining a .22 LR plinker, a .223 tactical carbine, or a varmint rifle, a properly sized bore brush is one of the quickest ways to keep your barrel in fighting shape and preserve accuracy over time.
The brush is stamped with its caliber designation right on the stem, so you'll never grab the wrong size in your cleaning kit. It threads onto standard cleaning rod connections using the universal 8-32 thread, fitting seamlessly into most conventional rod setups. At 3 inches long, it's proportioned to handle the bore thoroughly without unnecessary bulk.
Phosphor bronze bristles strike the balance between aggressive cleaning and barrel safety. Unlike steel brushes, they won't leave microscopic scoring or burrs that can affect accuracy or let corrosion take hold. Aluminum stems are lightweight and won't bind up if you're working at an angle, making the brush easier to handle during routine maintenance—whether you're cleaning at the bench or in the field.
| Caliber | .22 (rimfire, .22-250, .223/5.56mm) |
| Length | 3 inches |
| Thread | 8-32 |
| Bristle Material | Phosphor bronze |
| Stem Material | Aluminum |
This .22 Cal brush is designed for .22 rimfire, .22-250, and .223/5.56mm rifles. The brush is stamped with the size on the stem so you can keep it straight if you have multiple caliber brushes in your kit.
No. Phosphor bronze bristles are softer than rifle steel and are specifically engineered to clean effectively without scratching, pitting, or leaving residue that promotes rust. They're the standard choice for precision rifle maintenance.
The brush has an 8-32 thread, which is the standard thread used on most conventional cleaning rods and rod adapters. Verify that your rod, handle, or jag adapter matches this thread before use.
The brush is 3 inches long, which is a common working length that handles most rifle bores without excessive slack or binding when attached to a cleaning rod.
Shooter's Choice
A Shooter's Choice .22 Cal bore brush is a must-have cleaning tool for anyone running rimfire rifles, including .22 rimfire, .22-250, and .223/5.56mm platforms. This 3-inch brush features phosphor bronze bristles on an aluminum stem—a proven combination that scrubs fouling and carbon effectively without marring the precision surfaces inside your barrel. Whether you're maintaining a .22 LR plinker, a .223 tactical carbine, or a varmint rifle, a properly sized bore brush is one of the quickest ways to keep your barrel in fighting shape and preserve accuracy over time.
The brush is stamped with its caliber designation right on the stem, so you'll never grab the wrong size in your cleaning kit. It threads onto standard cleaning rod connections using the universal 8-32 thread, fitting seamlessly into most conventional rod setups. At 3 inches long, it's proportioned to handle the bore thoroughly without unnecessary bulk.
Phosphor bronze bristles strike the balance between aggressive cleaning and barrel safety. Unlike steel brushes, they won't leave microscopic scoring or burrs that can affect accuracy or let corrosion take hold. Aluminum stems are lightweight and won't bind up if you're working at an angle, making the brush easier to handle during routine maintenance—whether you're cleaning at the bench or in the field.
| Caliber | .22 (rimfire, .22-250, .223/5.56mm) |
| Length | 3 inches |
| Thread | 8-32 |
| Bristle Material | Phosphor bronze |
| Stem Material | Aluminum |
This .22 Cal brush is designed for .22 rimfire, .22-250, and .223/5.56mm rifles. The brush is stamped with the size on the stem so you can keep it straight if you have multiple caliber brushes in your kit.
No. Phosphor bronze bristles are softer than rifle steel and are specifically engineered to clean effectively without scratching, pitting, or leaving residue that promotes rust. They're the standard choice for precision rifle maintenance.
The brush has an 8-32 thread, which is the standard thread used on most conventional cleaning rods and rod adapters. Verify that your rod, handle, or jag adapter matches this thread before use.
The brush is 3 inches long, which is a common working length that handles most rifle bores without excessive slack or binding when attached to a cleaning rod.
