Seekins Precision 34mm Scope Rings - Xtra High (1.26"), Matte Finish, 4 Cap ScrewsSeekins Precision$149.00
Loading...
Loading...
Loading...
Loading...
Seekins Precision
A rifle scope is only as stable as the rings holding it—and that's where Seekins Precision 30mm scope rings prove their worth. These extra-high (1.26") matte rings are engineered for shooters who need serious elevation clearance, whether you're running a larger objective lens, a monster turret, or just want rock-solid geometry on a flat-top build. Built from 7075-T6 aluminum and machined to 1913 Picatinny spec, they're the kind of precision hardware that doesn't call attention to itself—it just works, year after year.
Seekins doesn't cut corners on scope mounting. The four-cap design with Grade 8 T-25 Torx fasteners gives you clamping force and repeatability without the guesswork. Each pair is serialized, so you know exactly what you're getting. The xtra-high height is purpose-built for AR platforms, large-tube scopes, or any setup where standard or medium rings would force you to crane your neck or compromise your sight picture. Matte finish keeps glare down and pairs cleanly with most modern optics and rail systems.
Whether you're dialing in a precision rifle, mounting an optic on a modern sporting rifle, or building a specialized hunting platform, these rings are about trust—the kind you earn through obsessive design and attention to detail. Seekins has been doing this long enough to understand that scope mounting is non-negotiable, and these rings reflect that philosophy.
| Tube Diameter | 30mm |
| Ring Height | 1.26" (Xtra High) |
| Fastener Type | Grade 8 T-25 Torx cap screws (4) |
| Material | 7075-T6 aluminum |
| Mounting Standard | 1913 Picatinny |
| Finish | Matte |
| Serialized | Yes (pairs) |
Seekins Precision makes six different ring heights: .82" low, .87" medium, .92" medium-high, .97" high, 1.26" xtra high, and 1.40" AR high. The xtra-high 1.26" is ideal for AR-platform rifles, large-objective scopes, or any setup where standard rings would interfere with turrets or leave insufficient clearance. Measure your specific build to confirm.
Yes—these rings accept any standard 30mm tube scope. They're built to the 1913 Picatinny specification, so they'll mount to any Picatinny rail or flat-top receiver.
Each pair includes four Grade 8 T-25 Torx cap screws. You'll need a T-25 Torx driver or wrench to install and adjust them.
Serialization lets you verify that you have an authentic Seekins pair and provides traceability. Each pair is numbered for quality control and customer assurance.
Seekins Precision
A rifle scope is only as stable as the rings holding it—and that's where Seekins Precision 30mm scope rings prove their worth. These extra-high (1.26") matte rings are engineered for shooters who need serious elevation clearance, whether you're running a larger objective lens, a monster turret, or just want rock-solid geometry on a flat-top build. Built from 7075-T6 aluminum and machined to 1913 Picatinny spec, they're the kind of precision hardware that doesn't call attention to itself—it just works, year after year.
Seekins doesn't cut corners on scope mounting. The four-cap design with Grade 8 T-25 Torx fasteners gives you clamping force and repeatability without the guesswork. Each pair is serialized, so you know exactly what you're getting. The xtra-high height is purpose-built for AR platforms, large-tube scopes, or any setup where standard or medium rings would force you to crane your neck or compromise your sight picture. Matte finish keeps glare down and pairs cleanly with most modern optics and rail systems.
Whether you're dialing in a precision rifle, mounting an optic on a modern sporting rifle, or building a specialized hunting platform, these rings are about trust—the kind you earn through obsessive design and attention to detail. Seekins has been doing this long enough to understand that scope mounting is non-negotiable, and these rings reflect that philosophy.
| Tube Diameter | 30mm |
| Ring Height | 1.26" (Xtra High) |
| Fastener Type | Grade 8 T-25 Torx cap screws (4) |
| Material | 7075-T6 aluminum |
| Mounting Standard | 1913 Picatinny |
| Finish | Matte |
| Serialized | Yes (pairs) |
Seekins Precision makes six different ring heights: .82" low, .87" medium, .92" medium-high, .97" high, 1.26" xtra high, and 1.40" AR high. The xtra-high 1.26" is ideal for AR-platform rifles, large-objective scopes, or any setup where standard rings would interfere with turrets or leave insufficient clearance. Measure your specific build to confirm.
Yes—these rings accept any standard 30mm tube scope. They're built to the 1913 Picatinny specification, so they'll mount to any Picatinny rail or flat-top receiver.
Each pair includes four Grade 8 T-25 Torx cap screws. You'll need a T-25 Torx driver or wrench to install and adjust them.
Serialization lets you verify that you have an authentic Seekins pair and provides traceability. Each pair is numbered for quality control and customer assurance.