Samson Manufacturing Corp Manual Front (Hk) Sight Picatinny BlackSamson Manufacturing$71.60
Loading...
Loading...
Loading...
Loading...
Samson Manufacturing
The Samson Manufacturing Fixed Front Sight FXF-HK is a rugged Picatinny rail-mounted front sight built for shooters who want a dependable backup or primary aiming solution without electronics or batteries. Designed to attach to any standard 1913 Picatinny rail, this fixed front sight offers the solid, zero-holding performance you need on modern sporting rifles, carbines, and tactical builds. Whether you're running it alongside a magnified optic or pairing it with an iron sight rear, the FXF-HK's robust construction and proven design make it a no-nonsense choice for hunters, competition shooters, and operators who prioritize reliability.
Construction is where this sight shines. Samson builds the FXF-HK from stainless steel with a solid mounting clamp that locks securely to your rail—no wobble, no creep. The fixed post design means nothing to adjust, nothing to break, and nothing that needs zeroing once you've got it dialed. This sight achieves M4-pattern co-witness height, so if you're running an optic mounted higher on your receiver, the front post will align with your scope's reticle for seamless target transitions. The design also accepts standard aftermarket front sight post replacements with Mil-spec dimensions, so you can tailor the post style to your preference or mission profile.
The FXF-HK is not designed for lower-height gas block rails, so verify your mounting surface before purchase. Once installed on the correct Picatinny platform, you're looking at a sight that will keep your zero intact through rough handling, recoil, and hard use—exactly what you expect from a Samson product.
| Product Name | Samson Manufacturing Fixed Front Sight FXF-HK |
| Sight Type | Fixed front sight |
| Mount Type | Picatinny rail (1913) |
| Co-Witness Height | M4-pattern |
| Material | Stainless steel |
| Mounting System | Stainless steel clamp |
| Post Replacement | Accepts Mil-spec aftermarket front sight posts |
| Intended Use | Not for lower-height gas block rails |
The Samson FXF-HK is designed to attach to any standard 1913 Picatinny rail. It is not intended for lower-height gas block rails, so make sure your mounting platform is a full-height Picatinny interface before ordering.
Yes. The FXF-HK is built to M4 co-witness height, which means it will align with magnified scopes mounted in standard receiver-height rings, allowing you to use the front post as a secondary aiming point or for rapid target transitions.
The sight accepts standard aftermarket front sight post replacements that meet Mil-spec dimensions, giving you flexibility to swap in different post styles to suit your preference or tactical need.
The FXF-HK is built from stainless steel with a solid clamp mounting system designed to hold zero through recoil and rough handling. Its fixed design—with no moving parts to adjust or fail—makes it one of the most reliable iron sight solutions available.
Samson Manufacturing
The Samson Manufacturing Fixed Front Sight FXF-HK is a rugged Picatinny rail-mounted front sight built for shooters who want a dependable backup or primary aiming solution without electronics or batteries. Designed to attach to any standard 1913 Picatinny rail, this fixed front sight offers the solid, zero-holding performance you need on modern sporting rifles, carbines, and tactical builds. Whether you're running it alongside a magnified optic or pairing it with an iron sight rear, the FXF-HK's robust construction and proven design make it a no-nonsense choice for hunters, competition shooters, and operators who prioritize reliability.
Construction is where this sight shines. Samson builds the FXF-HK from stainless steel with a solid mounting clamp that locks securely to your rail—no wobble, no creep. The fixed post design means nothing to adjust, nothing to break, and nothing that needs zeroing once you've got it dialed. This sight achieves M4-pattern co-witness height, so if you're running an optic mounted higher on your receiver, the front post will align with your scope's reticle for seamless target transitions. The design also accepts standard aftermarket front sight post replacements with Mil-spec dimensions, so you can tailor the post style to your preference or mission profile.
The FXF-HK is not designed for lower-height gas block rails, so verify your mounting surface before purchase. Once installed on the correct Picatinny platform, you're looking at a sight that will keep your zero intact through rough handling, recoil, and hard use—exactly what you expect from a Samson product.
| Product Name | Samson Manufacturing Fixed Front Sight FXF-HK |
| Sight Type | Fixed front sight |
| Mount Type | Picatinny rail (1913) |
| Co-Witness Height | M4-pattern |
| Material | Stainless steel |
| Mounting System | Stainless steel clamp |
| Post Replacement | Accepts Mil-spec aftermarket front sight posts |
| Intended Use | Not for lower-height gas block rails |
The Samson FXF-HK is designed to attach to any standard 1913 Picatinny rail. It is not intended for lower-height gas block rails, so make sure your mounting platform is a full-height Picatinny interface before ordering.
Yes. The FXF-HK is built to M4 co-witness height, which means it will align with magnified scopes mounted in standard receiver-height rings, allowing you to use the front post as a secondary aiming point or for rapid target transitions.
The sight accepts standard aftermarket front sight post replacements that meet Mil-spec dimensions, giving you flexibility to swap in different post styles to suit your preference or tactical need.
The FXF-HK is built from stainless steel with a solid clamp mounting system designed to hold zero through recoil and rough handling. Its fixed design—with no moving parts to adjust or fail—makes it one of the most reliable iron sight solutions available.