Rugged Suppressor FH012 R3 Flash Mitigation System, Black, M18x1 TPI Threads, 2.13" OAL, for 7.62mm Radiant762, Surge762, Razor762 & Micro30 SuppressorsRugged Suppressor$80.00
Loading...
Loading...
Loading...
Loading...
Rugged Suppressor
The Rugged Suppressor FH006 R3 Flash Mitigation System is a 7.62mm flash hider purpose-built to work seamlessly with Rugged's suppressor line—the Radiant762, Surge762, Razor762, and Micro30. Threading at 3/4"-24 tpi and measuring just 2.13" in overall length, this muzzle device combines genuine flash reduction with a compact footprint that won't bloat your rifle's profile. If you're running a 14.5" barrel and need to legally reach 16", the R3 is long enough to do that job while staying on target during low-light hunting or training scenarios where muzzle flash matters.
The R3 uses variable fluted prongs—a design that breaks up the shock and expansion of powder gases to mitigate flash without the snag and snarl of toothed brakes. Rugged's proprietary Dual Taper Locking System ditches the teeth entirely, meaning no sharp edges to catch on gear or leave marks on your suppressor's mounting surface. The toothless design is a genuine convenience if you're swapping between hosts or running missions where a clean interface is worth its weight.
Finished in black, the R3 plays nice with any modern 7.62 NATO or .308 setup running a Rugged suppressor. The system is straightforward to install and remove—no roll pins or crush grooves to overthink. Whether you're a dedicated suppressed-rifle hunter, a precision rifleman managing backblast at the range, or a tactical operator balancing legality with low signature, the R3 is Rugged's answer to flash control in a lightweight, no-nonsense package.
| Caliber | 7.62mm / .308 Winchester |
| Thread Pitch | 3/4"-24 tpi |
| Overall Length | 2.13" |
| Compatible Suppressors | Rugged Radiant762, Surge762, Razor762, Micro30 |
| Locking System | Dual Taper (toothless) |
| Finish | Black |
The R3 FH006 is designed for use with Rugged's Radiant762, Surge762, Razor762, and Micro30 suppressors. It uses Rugged's Dual Taper Locking System, so it will work with any of those models. Verify your suppressor model before purchase.
Yes. The R3 is 2.13" long, making it suitable for mounting on 14.5" barrels to bring them to a legal 16" overall length. Ensure your barrel is threaded at 3/4"-24 tpi.
The R3 uses variable fluted prongs instead of teeth, which reduces flash effectively while eliminating snag points. The toothless design also keeps the suppressor's mounting surface clean and unmarked, which matters if you rotate suppressors between hosts or prioritize a snag-free package.
Yes. The Dual Taper Locking System is toothless and straightforward—no crush grooves or roll pins to manage. Hand-tightness is typically sufficient for field changes, though always ensure it's secure before firing.
Rugged Suppressor
The Rugged Suppressor FH006 R3 Flash Mitigation System is a 7.62mm flash hider purpose-built to work seamlessly with Rugged's suppressor line—the Radiant762, Surge762, Razor762, and Micro30. Threading at 3/4"-24 tpi and measuring just 2.13" in overall length, this muzzle device combines genuine flash reduction with a compact footprint that won't bloat your rifle's profile. If you're running a 14.5" barrel and need to legally reach 16", the R3 is long enough to do that job while staying on target during low-light hunting or training scenarios where muzzle flash matters.
The R3 uses variable fluted prongs—a design that breaks up the shock and expansion of powder gases to mitigate flash without the snag and snarl of toothed brakes. Rugged's proprietary Dual Taper Locking System ditches the teeth entirely, meaning no sharp edges to catch on gear or leave marks on your suppressor's mounting surface. The toothless design is a genuine convenience if you're swapping between hosts or running missions where a clean interface is worth its weight.
Finished in black, the R3 plays nice with any modern 7.62 NATO or .308 setup running a Rugged suppressor. The system is straightforward to install and remove—no roll pins or crush grooves to overthink. Whether you're a dedicated suppressed-rifle hunter, a precision rifleman managing backblast at the range, or a tactical operator balancing legality with low signature, the R3 is Rugged's answer to flash control in a lightweight, no-nonsense package.
| Caliber | 7.62mm / .308 Winchester |
| Thread Pitch | 3/4"-24 tpi |
| Overall Length | 2.13" |
| Compatible Suppressors | Rugged Radiant762, Surge762, Razor762, Micro30 |
| Locking System | Dual Taper (toothless) |
| Finish | Black |
The R3 FH006 is designed for use with Rugged's Radiant762, Surge762, Razor762, and Micro30 suppressors. It uses Rugged's Dual Taper Locking System, so it will work with any of those models. Verify your suppressor model before purchase.
Yes. The R3 is 2.13" long, making it suitable for mounting on 14.5" barrels to bring them to a legal 16" overall length. Ensure your barrel is threaded at 3/4"-24 tpi.
The R3 uses variable fluted prongs instead of teeth, which reduces flash effectively while eliminating snag points. The toothless design also keeps the suppressor's mounting surface clean and unmarked, which matters if you rotate suppressors between hosts or prioritize a snag-free package.
Yes. The Dual Taper Locking System is toothless and straightforward—no crush grooves or roll pins to manage. Hand-tightness is typically sufficient for field changes, though always ensure it's secure before firing.