Loading...
Loading...
Loading...
Loading...
Redding Reloading Equipment
The Redding Titanium Nitride Bushing/.290 is a precision neck-sizing bushing designed for reloaders who want to reduce friction and extend die life during the case-sizing process. This .290-inch bushing fits Redding's bushing-style neck-sizing dies, giving handloaders the option to fine-tune neck tension for their specific ammunition. The titanium nitride coating—applied over heat-treated steel—increases surface hardness significantly compared to standard bushings, which translates to smoother sizing strokes and less wear on your dies and cases over thousands of reloading cycles.
If you're working up loads for a cartridge like the .300 Blackout, 6.5 Creedmoor, or another round that benefits from precise neck control, swapping bushings lets you dial in the exact fit you need without buying a whole new die set. Redding manufactures bushings in .001-inch increments across the full range, so whether you're loading for a tight-necked wildcat or a standard commercial round, there's a size that matches your brass and your shooting goals.
The titanium nitride finish does the heavy lifting here: it hardens the working surface so bushings resist galling and maintain their dimensions across tens of thousands of rounds. That means less case-neck damage, more consistent sizing, and ultimately more predictable ammunition. For reloaders who demand repeatability and want to protect their investment in quality dies, this bushing upgrade is a small cost that pays dividends in brass longevity and load consistency.
| Product Name | Redding Titanium Nitride Bushing/.290 |
| Bushing Size | .290 inch |
| Coating | Titanium Nitride |
| Base Material | Heat-treated steel |
| Size Increment | Available in .001-inch increments across full range |
This bushing is designed for Redding bushing-style neck-sizing dies. Confirm compatibility with your specific die before ordering.
The titanium nitride coating hardens the working surface, which reduces friction during sizing, decreases wear on both the bushing and your brass, and helps maintain dimensional consistency across extended reloading sessions.
This is a .290-inch bushing, so it's suited for cartridges with a .290-inch neck diameter. If you reload multiple calibers, you'll need bushings in the appropriate sizes for each.
Redding manufactures bushings in .001-inch increments from .185 inches through .368 inches. Measure your case neck or consult load data for your specific cartridge to determine the right size.
Redding Reloading Equipment
The Redding Titanium Nitride Bushing/.290 is a precision neck-sizing bushing designed for reloaders who want to reduce friction and extend die life during the case-sizing process. This .290-inch bushing fits Redding's bushing-style neck-sizing dies, giving handloaders the option to fine-tune neck tension for their specific ammunition. The titanium nitride coating—applied over heat-treated steel—increases surface hardness significantly compared to standard bushings, which translates to smoother sizing strokes and less wear on your dies and cases over thousands of reloading cycles.
If you're working up loads for a cartridge like the .300 Blackout, 6.5 Creedmoor, or another round that benefits from precise neck control, swapping bushings lets you dial in the exact fit you need without buying a whole new die set. Redding manufactures bushings in .001-inch increments across the full range, so whether you're loading for a tight-necked wildcat or a standard commercial round, there's a size that matches your brass and your shooting goals.
The titanium nitride finish does the heavy lifting here: it hardens the working surface so bushings resist galling and maintain their dimensions across tens of thousands of rounds. That means less case-neck damage, more consistent sizing, and ultimately more predictable ammunition. For reloaders who demand repeatability and want to protect their investment in quality dies, this bushing upgrade is a small cost that pays dividends in brass longevity and load consistency.
| Product Name | Redding Titanium Nitride Bushing/.290 |
| Bushing Size | .290 inch |
| Coating | Titanium Nitride |
| Base Material | Heat-treated steel |
| Size Increment | Available in .001-inch increments across full range |
This bushing is designed for Redding bushing-style neck-sizing dies. Confirm compatibility with your specific die before ordering.
The titanium nitride coating hardens the working surface, which reduces friction during sizing, decreases wear on both the bushing and your brass, and helps maintain dimensional consistency across extended reloading sessions.
This is a .290-inch bushing, so it's suited for cartridges with a .290-inch neck diameter. If you reload multiple calibers, you'll need bushings in the appropriate sizes for each.
Redding manufactures bushings in .001-inch increments from .185 inches through .368 inches. Measure your case neck or consult load data for your specific cartridge to determine the right size.
