Loading...
Loading...
Loading...
Loading...
Redding Reloading Equipment
The Redding 6mm PPC bushing neck die set is built for shooters who demand precision in competition reloading. This three-die system—competition bushing neck sizing die, body die, and competition bullet seater—is engineered to deliver the consistent neck control and case support that PPC cartridges require for tight, repeatable loads. If you're loading for a PPC rifle and want to eliminate variables in the sizing and seating process, this set gives you the tools to do it.
The competition bushing neck die is where this set shines. The cartridge case slides into a tightly chambered, supported sleeve that keeps everything aligned before sizing begins. As the case moves upward, a self-centering sizing bushing does the work, while the decapping rod stays precisely aligned using the die's internal parts as a linear guide—much like a firing pin bore. A micrometer adjustment lets you dial in exactly how much of the neck you want sized, giving you shot-to-shot consistency that loose-fit dies simply can't match.
The body die full-length resizes the case body and bumps the shoulder forward for proper chambering, all without touching the neck you've already perfected. The competition bullet seater uses a floating seating stem with manufacturing tolerances tight enough that the stem actually floats within its guide—this precision fit ensures bullets seat concentrically and at the exact depth you set, every single round.
Redding's reputation in competition reloading speaks for itself. This set is for handloaders who understand that small gains in consistency add up to tighter groups. Note that bushings and shellholder are sold separately.
| Cartridge | 6mm PPC |
| Included Dies | Competition Bushing Neck Sizing Die, Body Die, Competition Bullet Seater |
| Neck Die Feature | Micrometer adjustment |
| Seater Feature | Micrometer adjustment, floating seating stem |
| Bushings | Sold separately |
| Shellholder | Sold separately |
Yes. Redding bushings and shellholders are sold as separate items. You'll need to select the correct bushing size for your cases and the appropriate shellholder for the 6mm PPC to complete your setup.
The bushing neck die in this set uses a self-centering sizing bushing and provides complete case support throughout the sizing stroke. The cartridge case is held in a tightly chambered, sliding sleeve, and the decapping rod is aligned using the die's internal parts as a linear guide. This design delivers more consistent neck control than traditional non-bushing dies.
This set is specifically designed for precision reloading—competition shooters, target work, and any application where tight neck control and concentric bullet seating matter. The micrometer adjustments and floating seating stem are built for consistency at the highest level.
The body die performs a full-length resize of the case body and bumps the shoulder forward to ensure proper chambering in your rifle, while leaving the neck (which you've sized separately) undisturbed.
Redding Reloading Equipment
The Redding 6mm PPC bushing neck die set is built for shooters who demand precision in competition reloading. This three-die system—competition bushing neck sizing die, body die, and competition bullet seater—is engineered to deliver the consistent neck control and case support that PPC cartridges require for tight, repeatable loads. If you're loading for a PPC rifle and want to eliminate variables in the sizing and seating process, this set gives you the tools to do it.
The competition bushing neck die is where this set shines. The cartridge case slides into a tightly chambered, supported sleeve that keeps everything aligned before sizing begins. As the case moves upward, a self-centering sizing bushing does the work, while the decapping rod stays precisely aligned using the die's internal parts as a linear guide—much like a firing pin bore. A micrometer adjustment lets you dial in exactly how much of the neck you want sized, giving you shot-to-shot consistency that loose-fit dies simply can't match.
The body die full-length resizes the case body and bumps the shoulder forward for proper chambering, all without touching the neck you've already perfected. The competition bullet seater uses a floating seating stem with manufacturing tolerances tight enough that the stem actually floats within its guide—this precision fit ensures bullets seat concentrically and at the exact depth you set, every single round.
Redding's reputation in competition reloading speaks for itself. This set is for handloaders who understand that small gains in consistency add up to tighter groups. Note that bushings and shellholder are sold separately.
| Cartridge | 6mm PPC |
| Included Dies | Competition Bushing Neck Sizing Die, Body Die, Competition Bullet Seater |
| Neck Die Feature | Micrometer adjustment |
| Seater Feature | Micrometer adjustment, floating seating stem |
| Bushings | Sold separately |
| Shellholder | Sold separately |
Yes. Redding bushings and shellholders are sold as separate items. You'll need to select the correct bushing size for your cases and the appropriate shellholder for the 6mm PPC to complete your setup.
The bushing neck die in this set uses a self-centering sizing bushing and provides complete case support throughout the sizing stroke. The cartridge case is held in a tightly chambered, sliding sleeve, and the decapping rod is aligned using the die's internal parts as a linear guide. This design delivers more consistent neck control than traditional non-bushing dies.
This set is specifically designed for precision reloading—competition shooters, target work, and any application where tight neck control and concentric bullet seating matter. The micrometer adjustments and floating seating stem are built for consistency at the highest level.
The body die performs a full-length resize of the case body and bumps the shoulder forward to ensure proper chambering in your rifle, while leaving the neck (which you've sized separately) undisturbed.
