Loading...
Loading...
Loading...
Loading...
RCBS
The RCBS Ultrasonic Weapons Cleaning Solution is a synthetic, concentrate-based cleaner engineered for deep-cleaning firearm components in an ultrasonic case cleaner. Whether you're maintaining rifle parts after a range session, prepping brass for reloading, or restoring fouled actions and bolts, this solution cuts through carbon, grease, and powder residue without the corrosive solvents that can damage finished surfaces or leave rust. At a 40:1 dilution ratio, one 32 oz bottle makes up to 10 gallons of working solution—enough to handle serious volume without breaking the budget.
What sets this cleaner apart is its synthetic formula and built-in rust preventive. After the ultrasonic does the hard work breaking down stubborn buildup, the solution's corrosion inhibitors leave a protective film on steel and other metals. The low-foaming design means your ultrasonic cleaner runs efficiently without overflow mess, and the non-combustible chemistry makes it safer to handle and store than traditional petroleum-based solvents. It's made in the USA and designed to work seamlessly with RCBS ultrasonic case cleaning equipment.
Use is straightforward: dilute to the recommended ratio, fill your cleaner, submerge your parts, and let the ultrasonic action do the heavy lifting. The solution handles all interior and exterior surfaces—from bolt faces and firing pin channels to case necks and primer pockets. Once the cycle is done, a quick rinse and dry leaves parts clean, lubricated, and protected against corrosion until your next range day or reloading session.
| Brand | RCBS |
| Item Number | 87059 |
| Container Size | 32 oz |
| Yield at Standard Mix | 10 gallons (40:1 ratio) |
| Formula Type | Synthetic concentrate |
| Corrosive | No |
| Combustible | No |
The RCBS Ultrasonic Weapons Cleaning Solution is specifically designed for use with the RCBS Ultrasonic Case Cleaner and other compatible ultrasonic cleaning equipment.
One 32 oz bottle makes approximately 10 gallons of cleaning solution when mixed at the recommended 40:1 dilution ratio, making it economical for regular use.
Yes. The solution is non-corrosive and includes rust preventive properties to protect against corrosion, making it safe for all firearm metals including blued and stainless steel.
The solution is formulated to remove carbon buildup, grease, and powder fouling from firearm parts, including interior surfaces like bolt faces, firing pin channels, and case primer pockets.
RCBS
The RCBS Ultrasonic Weapons Cleaning Solution is a synthetic, concentrate-based cleaner engineered for deep-cleaning firearm components in an ultrasonic case cleaner. Whether you're maintaining rifle parts after a range session, prepping brass for reloading, or restoring fouled actions and bolts, this solution cuts through carbon, grease, and powder residue without the corrosive solvents that can damage finished surfaces or leave rust. At a 40:1 dilution ratio, one 32 oz bottle makes up to 10 gallons of working solution—enough to handle serious volume without breaking the budget.
What sets this cleaner apart is its synthetic formula and built-in rust preventive. After the ultrasonic does the hard work breaking down stubborn buildup, the solution's corrosion inhibitors leave a protective film on steel and other metals. The low-foaming design means your ultrasonic cleaner runs efficiently without overflow mess, and the non-combustible chemistry makes it safer to handle and store than traditional petroleum-based solvents. It's made in the USA and designed to work seamlessly with RCBS ultrasonic case cleaning equipment.
Use is straightforward: dilute to the recommended ratio, fill your cleaner, submerge your parts, and let the ultrasonic action do the heavy lifting. The solution handles all interior and exterior surfaces—from bolt faces and firing pin channels to case necks and primer pockets. Once the cycle is done, a quick rinse and dry leaves parts clean, lubricated, and protected against corrosion until your next range day or reloading session.
| Brand | RCBS |
| Item Number | 87059 |
| Container Size | 32 oz |
| Yield at Standard Mix | 10 gallons (40:1 ratio) |
| Formula Type | Synthetic concentrate |
| Corrosive | No |
| Combustible | No |
The RCBS Ultrasonic Weapons Cleaning Solution is specifically designed for use with the RCBS Ultrasonic Case Cleaner and other compatible ultrasonic cleaning equipment.
One 32 oz bottle makes approximately 10 gallons of cleaning solution when mixed at the recommended 40:1 dilution ratio, making it economical for regular use.
Yes. The solution is non-corrosive and includes rust preventive properties to protect against corrosion, making it safe for all firearm metals including blued and stainless steel.
The solution is formulated to remove carbon buildup, grease, and powder fouling from firearm parts, including interior surfaces like bolt faces, firing pin channels, and case primer pockets.
