Night Fision Precision Optic Mounting Plate: ACRO to Glock Full Size MOSNight Fision$54.00
Loading...
Loading...
Loading...
Loading...
Night Fision
The Night Fision Precision Optic Mounting Plate for 507C/RMR to Glock Full Size MOS is a rock-solid adapter that lets you run modern red dot sights on your full-size Glock MOS slide. Built from 17-4 stainless steel and finished with a protective nitride coating, this plate is engineered to handle the recoil and abuse that come with duty or defensive shooting. At 0.2 inches thick, it provides a rigid, repeatable platform for optics that demand it—whether you're mounting a Holosun 507C, Trijicon RMR, or any sight with a compatible footprint.
Night Fision machines these plates to tight tolerances so your zero stays locked down through hard use. The kit includes everything you need to get running: precision hardware for your 507C, 407C, or RMR; a dedicated optic tool with T10 Torx and flat-head bits for installation and sight adjustment; and a lanyard hole so you can keep that tool tethered to your belt where it belongs. (Pair it with a Glow Rhino Spark if you need to find it in low light.)
Whether you're building a duty rig, upgrading a carry gun, or setting up a dedicated home-defense Glock, this mounting plate removes the guesswork. Install it once, dial in your optic, and trust it to perform. It's the kind of hardware that doesn't draw attention—because it just works.
| Material | 17-4 Stainless Steel, Nitride Coated |
| Plate Thickness | 0.2 inches |
| Firearm Compatibility | Glock Full Size MOS models |
| Optic Compatibility | Holosun 507C, Holosun 407C, Trijicon RMR, Trijicon SRO, and other RMR-footprint optics |
| Included Hardware Packs | 3 sets of precision mounting screws |
| Included Tool | Night Fision Optic Tool (T10 Torx and flat-head bits, lanyard hole) |
| Warranty | Limited Lifetime Warranty |
Yes. This mounting plate is specifically designed for Glock Full Size MOS slides and is compatible with the Holosun 507C (as well as the 407C). It accommodates any optic with a Trijicon RMR-pattern footprint.
You get the mounting plate, three complete hardware sets for 507C/407C/RMR-pattern optics, and the Night Fision Optic Tool (which has both a T10 Torx head for mounting screws and a flat-head bit for sight adjustments and battery compartment access on compatible optics). The tool has a lanyard hole so you can attach it to your belt or gear.
The mounting plate is machined from 17-4 stainless steel and finished with a protective nitride coating. This combination resists corrosion and wear while maintaining the precise tolerances needed for solid optic mounting.
This plate is designed for Glock Full Size MOS slides. Night Fision does make a separate mounting plate for Compact MOS models; check the specific product listing for compatibility with your slide size.
Night Fision
The Night Fision Precision Optic Mounting Plate for 507C/RMR to Glock Full Size MOS is a rock-solid adapter that lets you run modern red dot sights on your full-size Glock MOS slide. Built from 17-4 stainless steel and finished with a protective nitride coating, this plate is engineered to handle the recoil and abuse that come with duty or defensive shooting. At 0.2 inches thick, it provides a rigid, repeatable platform for optics that demand it—whether you're mounting a Holosun 507C, Trijicon RMR, or any sight with a compatible footprint.
Night Fision machines these plates to tight tolerances so your zero stays locked down through hard use. The kit includes everything you need to get running: precision hardware for your 507C, 407C, or RMR; a dedicated optic tool with T10 Torx and flat-head bits for installation and sight adjustment; and a lanyard hole so you can keep that tool tethered to your belt where it belongs. (Pair it with a Glow Rhino Spark if you need to find it in low light.)
Whether you're building a duty rig, upgrading a carry gun, or setting up a dedicated home-defense Glock, this mounting plate removes the guesswork. Install it once, dial in your optic, and trust it to perform. It's the kind of hardware that doesn't draw attention—because it just works.
| Material | 17-4 Stainless Steel, Nitride Coated |
| Plate Thickness | 0.2 inches |
| Firearm Compatibility | Glock Full Size MOS models |
| Optic Compatibility | Holosun 507C, Holosun 407C, Trijicon RMR, Trijicon SRO, and other RMR-footprint optics |
| Included Hardware Packs | 3 sets of precision mounting screws |
| Included Tool | Night Fision Optic Tool (T10 Torx and flat-head bits, lanyard hole) |
| Warranty | Limited Lifetime Warranty |
Yes. This mounting plate is specifically designed for Glock Full Size MOS slides and is compatible with the Holosun 507C (as well as the 407C). It accommodates any optic with a Trijicon RMR-pattern footprint.
You get the mounting plate, three complete hardware sets for 507C/407C/RMR-pattern optics, and the Night Fision Optic Tool (which has both a T10 Torx head for mounting screws and a flat-head bit for sight adjustments and battery compartment access on compatible optics). The tool has a lanyard hole so you can attach it to your belt or gear.
The mounting plate is machined from 17-4 stainless steel and finished with a protective nitride coating. This combination resists corrosion and wear while maintaining the precise tolerances needed for solid optic mounting.
This plate is designed for Glock Full Size MOS slides. Night Fision does make a separate mounting plate for Compact MOS models; check the specific product listing for compatibility with your slide size.
