Loading...
Loading...
Loading...
Loading...
NCStar
Working on your Glock's slide doesn't require a gunsmith's bench—the NCStar Vice Block Tool for Glock gives you a safe, repeatable way to secure your slide in a standard workbench vise. This anodized aluminum block slides onto your slide's frame rail grooves and clamps securely between vise jaws, holding the slide stable while you perform maintenance, install sights, or do other detail work. It's designed to protect your slide from marring and distribute clamping pressure evenly, so you can work without worrying about damaging your firearm.
The block fits most Glock models built on Standard, Compact, and Subcompact frames across common calibers—9mm, .40 S&W, .45 ACP, 10mm, .357 SIG, and .45 GAP. It won't work with the slimline designs (Models 42, 43, 43X, and 48), so verify your model before ordering. Setup is straightforward: insert the block onto your slide's rail grooves, clamp it in your vise, and tighten gradually. The key is not to overtighten—firm pressure is all you need.
If you reload, upgrade sights, or like to keep your carry gun running smooth, this tool makes hands-on maintenance easier and more consistent. It's a compact, affordable way to add workbench capability without dedicated gunsmithing equipment.
| Brand | NCStar |
| Material | Anodized aluminum |
| Finish | Blue anodized |
| Compatible Frame Types | Standard, Compact, Subcompact |
| Compatible Calibers | 9mm, .40 S&W, .45 ACP, 10mm, .357 SIG, .45 GAP |
| Not Compatible With | Slimline models (42, 43, 43X, 48) |
No. The NCStar Vice Block is designed for Standard, Compact, and Subcompact frame Glocks. It is not compatible with slimline models including the 42, 43, 43X, or 48.
It fits Glocks in 9mm, .40 S&W, .45 ACP, 10mm, .357 SIG, and .45 GAP, as long as they're built on Standard, Compact, or Subcompact frames. Check your model against the compatibility list before ordering.
Insert the block onto your slide's frame rail grooves, position it in your workbench vise, and tighten the vise jaws gradually and evenly. Do not overtighten—you only need firm contact to hold the slide steady. The anodized aluminum and distributed pressure design protect your slide finish.
Yes. The block secures your slide for any maintenance or detail work, including sight changes, as long as you tighten carefully and avoid over-clamping.
NCStar
Working on your Glock's slide doesn't require a gunsmith's bench—the NCStar Vice Block Tool for Glock gives you a safe, repeatable way to secure your slide in a standard workbench vise. This anodized aluminum block slides onto your slide's frame rail grooves and clamps securely between vise jaws, holding the slide stable while you perform maintenance, install sights, or do other detail work. It's designed to protect your slide from marring and distribute clamping pressure evenly, so you can work without worrying about damaging your firearm.
The block fits most Glock models built on Standard, Compact, and Subcompact frames across common calibers—9mm, .40 S&W, .45 ACP, 10mm, .357 SIG, and .45 GAP. It won't work with the slimline designs (Models 42, 43, 43X, and 48), so verify your model before ordering. Setup is straightforward: insert the block onto your slide's rail grooves, clamp it in your vise, and tighten gradually. The key is not to overtighten—firm pressure is all you need.
If you reload, upgrade sights, or like to keep your carry gun running smooth, this tool makes hands-on maintenance easier and more consistent. It's a compact, affordable way to add workbench capability without dedicated gunsmithing equipment.
| Brand | NCStar |
| Material | Anodized aluminum |
| Finish | Blue anodized |
| Compatible Frame Types | Standard, Compact, Subcompact |
| Compatible Calibers | 9mm, .40 S&W, .45 ACP, 10mm, .357 SIG, .45 GAP |
| Not Compatible With | Slimline models (42, 43, 43X, 48) |
No. The NCStar Vice Block is designed for Standard, Compact, and Subcompact frame Glocks. It is not compatible with slimline models including the 42, 43, 43X, or 48.
It fits Glocks in 9mm, .40 S&W, .45 ACP, 10mm, .357 SIG, and .45 GAP, as long as they're built on Standard, Compact, or Subcompact frames. Check your model against the compatibility list before ordering.
Insert the block onto your slide's frame rail grooves, position it in your workbench vise, and tighten the vise jaws gradually and evenly. Do not overtighten—you only need firm contact to hold the slide steady. The anodized aluminum and distributed pressure design protect your slide finish.
Yes. The block secures your slide for any maintenance or detail work, including sight changes, as long as you tighten carefully and avoid over-clamping.
