Loading...
Loading...
Loading...
Loading...
NCStar
The NcStar Tactical Red Pistol Laser with Integral Weaver Mount is a compact, affordable aiming solution for handgun shooters who want to add speed and precision to their draw. This red laser mounts directly to any Weaver or Picatinny rail found on modern tactical pistols, duty guns, and competition rigs. At just 1.3 ounces and measuring a mere 2 inches long, it adds virtually no bulk while giving you a visible aiming point in low light or dynamic shooting scenarios.
Built from aluminum and finished in black anodize, the laser is tough enough for hard use but light enough that it won't throw off your gun's balance or handling. The side-mounted toggle switch gets you on or off quickly, and the windage and elevation adjustments let you zero it to your specific pistol and distance—no guessing required. It runs on two common AG13 button cell batteries (included), so you can start shooting right out of the box.
This is the kind of no-frills, practical gear that works: not fancy, not overbuilt, just a red laser that does one job well. Whether you're training for defensive pistol, running night drills, or setting up a competition gun, NcStar's tactical laser gives you another aiming reference without the premium price tag. Mounting hardware is included, and installation takes minutes.
| Laser Type | Red (Class IIIa) |
| Wavelength | 635–655 nm |
| Maximum Output | <5 mW |
| Mount Type | Weaver/Picatinny integral |
| Adjustment | Windage and elevation |
| Control | Side toggle switch |
| Material | Aluminum, black anodized |
| Length | 2.0 inches |
| Width | 1.1 inches |
| Height | 0.9 inches |
| Weight | 1.3 oz |
| Power Source | Two AG13 button cell batteries (included) |
The NcStar mounts via Weaver or Picatinny rail, so it's compatible with any tactical pistol or slide that has a rail section. If your gun has a standard Weaver or Picatinny profile, you're good to go. If you're unsure whether your specific model has a rail, check your gun's manual or contact the manufacturer.
No—two AG13 button cell batteries come with the laser, so you can mount it and use it immediately. When they run out, replacements are inexpensive and widely available. Note: International orders may not include batteries due to shipping regulations.
The laser features separate windage and elevation adjustments that let you align the dot with your point of aim at your preferred distance. Use the included mounting tools and test-fire at your typical engagement range to dial it in precisely.
At just 1.3 ounces, the NcStar laser adds negligible weight to your pistol. It's designed to mount compactly without throwing off your gun's balance or ergonomics, making it suitable for training, competition, or duty use.
NCStar
The NcStar Tactical Red Pistol Laser with Integral Weaver Mount is a compact, affordable aiming solution for handgun shooters who want to add speed and precision to their draw. This red laser mounts directly to any Weaver or Picatinny rail found on modern tactical pistols, duty guns, and competition rigs. At just 1.3 ounces and measuring a mere 2 inches long, it adds virtually no bulk while giving you a visible aiming point in low light or dynamic shooting scenarios.
Built from aluminum and finished in black anodize, the laser is tough enough for hard use but light enough that it won't throw off your gun's balance or handling. The side-mounted toggle switch gets you on or off quickly, and the windage and elevation adjustments let you zero it to your specific pistol and distance—no guessing required. It runs on two common AG13 button cell batteries (included), so you can start shooting right out of the box.
This is the kind of no-frills, practical gear that works: not fancy, not overbuilt, just a red laser that does one job well. Whether you're training for defensive pistol, running night drills, or setting up a competition gun, NcStar's tactical laser gives you another aiming reference without the premium price tag. Mounting hardware is included, and installation takes minutes.
| Laser Type | Red (Class IIIa) |
| Wavelength | 635–655 nm |
| Maximum Output | <5 mW |
| Mount Type | Weaver/Picatinny integral |
| Adjustment | Windage and elevation |
| Control | Side toggle switch |
| Material | Aluminum, black anodized |
| Length | 2.0 inches |
| Width | 1.1 inches |
| Height | 0.9 inches |
| Weight | 1.3 oz |
| Power Source | Two AG13 button cell batteries (included) |
The NcStar mounts via Weaver or Picatinny rail, so it's compatible with any tactical pistol or slide that has a rail section. If your gun has a standard Weaver or Picatinny profile, you're good to go. If you're unsure whether your specific model has a rail, check your gun's manual or contact the manufacturer.
No—two AG13 button cell batteries come with the laser, so you can mount it and use it immediately. When they run out, replacements are inexpensive and widely available. Note: International orders may not include batteries due to shipping regulations.
The laser features separate windage and elevation adjustments that let you align the dot with your point of aim at your preferred distance. Use the included mounting tools and test-fire at your typical engagement range to dial it in precisely.
At just 1.3 ounces, the NcStar laser adds negligible weight to your pistol. It's designed to mount compactly without throwing off your gun's balance or ergonomics, making it suitable for training, competition, or duty use.
