Loading...
Loading...
Loading...
Loading...
Multi-Tasker
The Multi-Tasker Nano2 Tool is a purpose-built micro screwdriver for shooters who run red dot sights and need a reliable way to make field adjustments without fumbling for a full toolkit. At just 1.2 inches long and lighter than a penny, this compact tool lives on your keychain, in your EDC bag, or clipped to a lanyard—always there when you need to tweak windage, elevation, or swap batteries on the fly. Whether you're dialing in a Holosun at the range, servicing an Aimpoint ACRO on a duty gun, or fine-tuning a Trijicon RMR for a match, the Nano2 handles the job without bulk.
Built from 420 stainless steel with a Melonite finish, this tool is tough enough for regular use and corrosion-resistant enough to hang on a paracord lanyard without concern. The design is straightforward: a T10 Torx driver on one end for Aimpoint ACRO P1/P2 work, and a slim flat-head slot on the other for the wide range of common red dots that dominate modern optics. No extraneous features, no marketing fluff—just two proven screwdriver profiles engineered for the sights you actually own.
Compatibility is broad. The Torx end handles Aimpoint ACRO P1/P2 and Aimpoint Duty platforms. The slotted driver covers Holosun, Eotech EFLX, Leupold DeltaPoint Pro, Sig Romeo Pro1/Pro2, Steiner MPS, and Trijicon RMR, plus L3 Harris NGAL mounts. That covers most of the red dots in the field today—and if you run multiple optics across different guns, one Nano2 addresses them all. The lanyard hole accepts standard 550 paracord, so you can rig it however you like: attached to your range bag, clipped inside a shooting bag, or threaded through a vest pocket for instant access.
This is the kind of tool that vanishes from your thinking until you need it, then proves why you brought it. Lightweight, proven, and built to last.
| Length | 1.2 inches |
| Width | 0.5 inches |
| Weight | Less than 1 ounce |
| Material | 420 stainless steel |
| Finish | Melonite |
| Torx Driver | T10 |
| Slotted Driver | Slim profile |
The T10 Torx driver handles Aimpoint ACRO P1/P2 and Aimpoint Duty models. The slim slotted driver is compatible with Holosun, Eotech EFLX, Leupold DeltaPoint Pro, Sig Romeo Pro1/Pro2, Steiner MPS, Trijicon RMR, and L3 Harris NGAL. If you run a mix of these optics, one Nano2 covers them all.
Yes. The tool has a lanyard hole that accepts standard 550 paracord, so you can rig it however suits your carry method—clipped to a range bag, attached to a shooting vest, or threaded through a backpack.
The Nano2 measures 1.2 inches long by 0.5 inches wide and weighs less than 1 ounce, making it small enough to clip on a keychain or slip into any EDC pouch without adding noticeable bulk.
The tool is 420 stainless steel with a Melonite finish, which provides corrosion resistance and durability for both range use and field work.
Multi-Tasker
The Multi-Tasker Nano2 Tool is a purpose-built micro screwdriver for shooters who run red dot sights and need a reliable way to make field adjustments without fumbling for a full toolkit. At just 1.2 inches long and lighter than a penny, this compact tool lives on your keychain, in your EDC bag, or clipped to a lanyard—always there when you need to tweak windage, elevation, or swap batteries on the fly. Whether you're dialing in a Holosun at the range, servicing an Aimpoint ACRO on a duty gun, or fine-tuning a Trijicon RMR for a match, the Nano2 handles the job without bulk.
Built from 420 stainless steel with a Melonite finish, this tool is tough enough for regular use and corrosion-resistant enough to hang on a paracord lanyard without concern. The design is straightforward: a T10 Torx driver on one end for Aimpoint ACRO P1/P2 work, and a slim flat-head slot on the other for the wide range of common red dots that dominate modern optics. No extraneous features, no marketing fluff—just two proven screwdriver profiles engineered for the sights you actually own.
Compatibility is broad. The Torx end handles Aimpoint ACRO P1/P2 and Aimpoint Duty platforms. The slotted driver covers Holosun, Eotech EFLX, Leupold DeltaPoint Pro, Sig Romeo Pro1/Pro2, Steiner MPS, and Trijicon RMR, plus L3 Harris NGAL mounts. That covers most of the red dots in the field today—and if you run multiple optics across different guns, one Nano2 addresses them all. The lanyard hole accepts standard 550 paracord, so you can rig it however you like: attached to your range bag, clipped inside a shooting bag, or threaded through a vest pocket for instant access.
This is the kind of tool that vanishes from your thinking until you need it, then proves why you brought it. Lightweight, proven, and built to last.
| Length | 1.2 inches |
| Width | 0.5 inches |
| Weight | Less than 1 ounce |
| Material | 420 stainless steel |
| Finish | Melonite |
| Torx Driver | T10 |
| Slotted Driver | Slim profile |
The T10 Torx driver handles Aimpoint ACRO P1/P2 and Aimpoint Duty models. The slim slotted driver is compatible with Holosun, Eotech EFLX, Leupold DeltaPoint Pro, Sig Romeo Pro1/Pro2, Steiner MPS, Trijicon RMR, and L3 Harris NGAL. If you run a mix of these optics, one Nano2 covers them all.
Yes. The tool has a lanyard hole that accepts standard 550 paracord, so you can rig it however suits your carry method—clipped to a range bag, attached to a shooting vest, or threaded through a backpack.
The Nano2 measures 1.2 inches long by 0.5 inches wide and weighs less than 1 ounce, making it small enough to clip on a keychain or slip into any EDC pouch without adding noticeable bulk.
The tool is 420 stainless steel with a Melonite finish, which provides corrosion resistance and durability for both range use and field work.
