Loading...
Loading...
Loading...
Loading...
Midwest Industries
The Midwest Industries Benelli M4 T2 optic mount is purpose-built for shotgunners who want to run a red dot sight on their Benelli M4 or compatible clone without sacrificing the clean lines of their gun. This aluminum mount lets you co-witness your existing iron sights with a red dot in the lower third position—a critical advantage when you need backup aiming geometry or faster target acquisition at close range. Whether you're running a modern tactical shotgun for home defense, 3-gun competition, or patrol work, this mount solves the real-world problem of how to add a quality optic to a battle-proven platform.
The mount accepts Aimpoint T1, T2, H1, and H2 models, as well as most quality clones using the same footprint. Machined from 6061 aluminum with hard-coat anodizing, it's built to withstand the recoil punishment a shotgun delivers. At just 1.4 ounces, it adds virtually nothing to the gun's handling characteristics. The design reuses your factory M4 rail screws wherever possible, keeping the build simple and keeping spare parts to a minimum—though the mount ships with the necessary optic mounting hardware, so you're not forced to hunt for oddball fasteners.
Installation respects the M4's original design language: the mount seats low on the receiver rail and doesn't require you to sacrifice any other components or undertake complicated gunsmithing. If you're already familiar with mounting optics, this one bolts on without drama. For shooters new to red dot shotguns, the lower-third co-witness means your standard shotgun beads and rear sight stay in play, reducing the learning curve and giving you options in the moment.
| Brand | Midwest Industries |
| Firearm Compatibility | Benelli M4, M4 clones |
| Optic Compatibility | Aimpoint T1, T2, H1, H2, and clones |
| Co-Witness Height | Lower 1/3 |
| Material | Hard-coat anodized 6061 aluminum |
| Weight | 1.4 oz |
| Included Hardware | Optic mounting screws; requires factory M4 rail screws or Benelli part numbers 143990A (screws) and 1439610A (washers) |
Yes. The Midwest Industries mount is designed for the Benelli M4 platform and clones, so as long as your gun shares the M4's receiver rail geometry, this mount will bolt on.
The mount accepts Aimpoint T1, T2, H1, and H2 models, as well as clones that use the same Aimpoint footprint. If you're considering a different optic, confirm it uses that mounting pattern before purchasing.
Yes. The mount positions your red dot in the lower 1/3 co-witness position, which means your standard M4 shotgun beads and rear sight line up below the optic. You can aim through both simultaneously or use either one independently.
The mount ships with the screws needed to attach your optic. It reuses your factory M4 rail screws where possible. If your gun doesn't have M4 rail screws, you'll need Benelli part number 143990A (screws) and 1439610A (washers). Contact Benelli or your dealer for those parts if you don't already have them.
Midwest Industries
The Midwest Industries Benelli M4 T2 optic mount is purpose-built for shotgunners who want to run a red dot sight on their Benelli M4 or compatible clone without sacrificing the clean lines of their gun. This aluminum mount lets you co-witness your existing iron sights with a red dot in the lower third position—a critical advantage when you need backup aiming geometry or faster target acquisition at close range. Whether you're running a modern tactical shotgun for home defense, 3-gun competition, or patrol work, this mount solves the real-world problem of how to add a quality optic to a battle-proven platform.
The mount accepts Aimpoint T1, T2, H1, and H2 models, as well as most quality clones using the same footprint. Machined from 6061 aluminum with hard-coat anodizing, it's built to withstand the recoil punishment a shotgun delivers. At just 1.4 ounces, it adds virtually nothing to the gun's handling characteristics. The design reuses your factory M4 rail screws wherever possible, keeping the build simple and keeping spare parts to a minimum—though the mount ships with the necessary optic mounting hardware, so you're not forced to hunt for oddball fasteners.
Installation respects the M4's original design language: the mount seats low on the receiver rail and doesn't require you to sacrifice any other components or undertake complicated gunsmithing. If you're already familiar with mounting optics, this one bolts on without drama. For shooters new to red dot shotguns, the lower-third co-witness means your standard shotgun beads and rear sight stay in play, reducing the learning curve and giving you options in the moment.
| Brand | Midwest Industries |
| Firearm Compatibility | Benelli M4, M4 clones |
| Optic Compatibility | Aimpoint T1, T2, H1, H2, and clones |
| Co-Witness Height | Lower 1/3 |
| Material | Hard-coat anodized 6061 aluminum |
| Weight | 1.4 oz |
| Included Hardware | Optic mounting screws; requires factory M4 rail screws or Benelli part numbers 143990A (screws) and 1439610A (washers) |
Yes. The Midwest Industries mount is designed for the Benelli M4 platform and clones, so as long as your gun shares the M4's receiver rail geometry, this mount will bolt on.
The mount accepts Aimpoint T1, T2, H1, and H2 models, as well as clones that use the same Aimpoint footprint. If you're considering a different optic, confirm it uses that mounting pattern before purchasing.
Yes. The mount positions your red dot in the lower 1/3 co-witness position, which means your standard M4 shotgun beads and rear sight line up below the optic. You can aim through both simultaneously or use either one independently.
The mount ships with the screws needed to attach your optic. It reuses your factory M4 rail screws where possible. If your gun doesn't have M4 rail screws, you'll need Benelli part number 143990A (screws) and 1439610A (washers). Contact Benelli or your dealer for those parts if you don't already have them.
