Loading...
Loading...
Loading...
Loading...
Mdt Sporting Goods Inc
The MDT Vertical Adjustment Buttpad is a drop-in replacement for shooters running MDT's precision rifle chassis systems who want to dial in their cheek weld and shouldering position without swapping stocks. If you're building a match rifle, long-range hunter, or competition gun on an MDT platform, this buttpad gives you the fine-tuning control that separates a good fit from a great one. Instead of living with a fixed length of pull, you can adjust both vertically and horizontally to match your natural sight picture and shooting style.
The buttpad works across MDT's lineup—compatible with the XRS, HNT26, SRS-Lite, SCS-Lite, and CCS systems, as well as ORYX Sportsman chassis—so whether you're upgrading an existing rifle or building from the ground up, this part slides right in. It's machined from 6061-T6 aluminum and weighs just over a third of a pound, so it won't throw off your balance or add unnecessary bulk. The adjustment range is practical: you can dial up 2 inches, drop down 0.67 inches from neutral, and shift side to side 7mm each direction. That's plenty of room to find your sweet spot for consistent, comfortable shooting.
Installation is straightforward—this buttpad adds 0.57 inches to your length of pull, so factor that into your overall setup. Whether you're dialing it in for a prone position, bench shooting, or field hunting, the ability to micro-adjust both axes means you're not forced to compromise. Just another small refinement that separates a precision rifle built the right way.
| Material | 6061-T6 Aluminum |
| Color | Black |
| Weight | 0.4 lbs (0.18 kg) |
| Length of Pull Increase | 0.57 in (14.5 mm) |
| Vertical Adjustment Range | 2 in (52 mm) up / 0.67 in (17 mm) down from neutral |
| Horizontal Adjustment Range | 0.28 in (7 mm) each side / 0.55 in (14 mm) total |
This vertical adjustment buttpad works with MDT XRS, HNT26, SRS-Lite, SCS-Lite, and CCS systems. It's also compatible with the ORYX Sportsman Chassis System. If you're running a different chassis, check compatibility before ordering.
The buttpad itself adds 0.57 inches (14.5 mm) to your overall length of pull. From that baseline, you can adjust up an additional 2 inches or down 0.67 inches to dial in your exact fit.
Yes. Beyond vertical adjustment, you can shift the buttpad 0.28 inches (7 mm) on each side for a total horizontal range of 0.55 inches (14 mm). This lets you fine-tune your shoulder pocket fit left and right.
This buttpad is designed as a replacement for the stationary buttpad on compatible MDT chassis systems. Installation specifics depend on your particular chassis—refer to your MDT system's documentation for best results.
Mdt Sporting Goods Inc
The MDT Vertical Adjustment Buttpad is a drop-in replacement for shooters running MDT's precision rifle chassis systems who want to dial in their cheek weld and shouldering position without swapping stocks. If you're building a match rifle, long-range hunter, or competition gun on an MDT platform, this buttpad gives you the fine-tuning control that separates a good fit from a great one. Instead of living with a fixed length of pull, you can adjust both vertically and horizontally to match your natural sight picture and shooting style.
The buttpad works across MDT's lineup—compatible with the XRS, HNT26, SRS-Lite, SCS-Lite, and CCS systems, as well as ORYX Sportsman chassis—so whether you're upgrading an existing rifle or building from the ground up, this part slides right in. It's machined from 6061-T6 aluminum and weighs just over a third of a pound, so it won't throw off your balance or add unnecessary bulk. The adjustment range is practical: you can dial up 2 inches, drop down 0.67 inches from neutral, and shift side to side 7mm each direction. That's plenty of room to find your sweet spot for consistent, comfortable shooting.
Installation is straightforward—this buttpad adds 0.57 inches to your length of pull, so factor that into your overall setup. Whether you're dialing it in for a prone position, bench shooting, or field hunting, the ability to micro-adjust both axes means you're not forced to compromise. Just another small refinement that separates a precision rifle built the right way.
| Material | 6061-T6 Aluminum |
| Color | Black |
| Weight | 0.4 lbs (0.18 kg) |
| Length of Pull Increase | 0.57 in (14.5 mm) |
| Vertical Adjustment Range | 2 in (52 mm) up / 0.67 in (17 mm) down from neutral |
| Horizontal Adjustment Range | 0.28 in (7 mm) each side / 0.55 in (14 mm) total |
This vertical adjustment buttpad works with MDT XRS, HNT26, SRS-Lite, SCS-Lite, and CCS systems. It's also compatible with the ORYX Sportsman Chassis System. If you're running a different chassis, check compatibility before ordering.
The buttpad itself adds 0.57 inches (14.5 mm) to your overall length of pull. From that baseline, you can adjust up an additional 2 inches or down 0.67 inches to dial in your exact fit.
Yes. Beyond vertical adjustment, you can shift the buttpad 0.28 inches (7 mm) on each side for a total horizontal range of 0.55 inches (14 mm). This lets you fine-tune your shoulder pocket fit left and right.
This buttpad is designed as a replacement for the stationary buttpad on compatible MDT chassis systems. Installation specifics depend on your particular chassis—refer to your MDT system's documentation for best results.
