Loading...
Loading...
Loading...
Loading...
Magpul
The Magpul PMAG 30 AR/M4 Gen M3 is a modern polymer magazine purpose-built for 5.56x45 NATO and .223 Remington chambered rifles. If you run an AR-15, M4 carbine, or any of the growing roster of STANAG 4179-compatible platforms, this 30-round magazine brings the durability and reliability that serious shooters—whether training at the range, hunting in the field, or running tactical drills—have come to expect from Magpul's Gen M3 lineup. Unlike the generic aluminum surplus mags gathering dust in dealers' bargain bins, the Gen M3 was engineered from the ground up with impact-resistant polymer construction, constant-curve internal geometry, and manufacturing processes that exceed military performance standards.
What sets the Gen M3 apart is attention to the details that matter when it counts. The redesigned floorplate is flared for easier extraction and mag changes, yet slim enough to fit snugly in stacked mag pouches without the rattle and binding of earlier designs. The anti-tilt follower is self-lubricating and engineered to feed reliably round after round, backed by a long-life stainless steel spring that won't wear out or corrode. An over-travel insertion stop on the spine prevents the magazine from seating too deep on compatible weapons, while the bolt catch notch has been refined for increased clearance—small moves that add up to hassle-free operation in the field or on the line.
Magpul also built in practical features for real-world use: a paint pen dot matrix molded into the bottom lets you quickly mark different loads or ammunition types without peeling off labels. Low-profile ribs and aggressive front and rear texture give you solid purchase whether your hands are dry, cold, or wet. The entire magazine is tool-free to disassemble for cleaning, and it weighs a feather at just 5 ounces. Made in the USA, the Gen M3 works across a wide range of modern rifle platforms beyond the standard AR-15—compatibility extends to SCAR, HK416, Tavor, and other STANAG-spec systems.
| Caliber | 5.56x45 NATO / .223 Remington |
| Capacity | 30 rounds |
| Material | Impact-resistant polymer construction |
| Weight | 5 oz. |
| Maximum Length | 7.5 inches |
| Spring | Long-life stainless steel (USGI-spec) |
| Platform Compatibility | AR-15, M4, M16, SA-80, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and other STANAG 4179 platforms |
| Country of Origin | Made in the USA |
Yes. The Gen M3 is optimized for Colt-spec AR-15 and M4 platforms and is fully compatible with both. Modified internal and external geometry also permit operation with a wide range of STANAG 4179-compliant weapons, including the HK 416, MR556, SCAR MK16/16S, IWI Tavor, and others.
Absolutely. The floorplate is slimmer than previous designs specifically to fit well in double and triple magazine pouches without binding or excessive movement.
The Gen M3 features tool-less disassembly, so you can easily field-strip it for cleaning without special equipment. The follower is self-lubricating and the stainless steel spring is corrosion-resistant, keeping maintenance simple.
Yes. A paint pen dot matrix is molded into the bottom panel of the magazine, allowing you to quickly mark and identify different ammunition types or loads without labels.
Magpul
The Magpul PMAG 30 AR/M4 Gen M3 is a modern polymer magazine purpose-built for 5.56x45 NATO and .223 Remington chambered rifles. If you run an AR-15, M4 carbine, or any of the growing roster of STANAG 4179-compatible platforms, this 30-round magazine brings the durability and reliability that serious shooters—whether training at the range, hunting in the field, or running tactical drills—have come to expect from Magpul's Gen M3 lineup. Unlike the generic aluminum surplus mags gathering dust in dealers' bargain bins, the Gen M3 was engineered from the ground up with impact-resistant polymer construction, constant-curve internal geometry, and manufacturing processes that exceed military performance standards.
What sets the Gen M3 apart is attention to the details that matter when it counts. The redesigned floorplate is flared for easier extraction and mag changes, yet slim enough to fit snugly in stacked mag pouches without the rattle and binding of earlier designs. The anti-tilt follower is self-lubricating and engineered to feed reliably round after round, backed by a long-life stainless steel spring that won't wear out or corrode. An over-travel insertion stop on the spine prevents the magazine from seating too deep on compatible weapons, while the bolt catch notch has been refined for increased clearance—small moves that add up to hassle-free operation in the field or on the line.
Magpul also built in practical features for real-world use: a paint pen dot matrix molded into the bottom lets you quickly mark different loads or ammunition types without peeling off labels. Low-profile ribs and aggressive front and rear texture give you solid purchase whether your hands are dry, cold, or wet. The entire magazine is tool-free to disassemble for cleaning, and it weighs a feather at just 5 ounces. Made in the USA, the Gen M3 works across a wide range of modern rifle platforms beyond the standard AR-15—compatibility extends to SCAR, HK416, Tavor, and other STANAG-spec systems.
| Caliber | 5.56x45 NATO / .223 Remington |
| Capacity | 30 rounds |
| Material | Impact-resistant polymer construction |
| Weight | 5 oz. |
| Maximum Length | 7.5 inches |
| Spring | Long-life stainless steel (USGI-spec) |
| Platform Compatibility | AR-15, M4, M16, SA-80, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and other STANAG 4179 platforms |
| Country of Origin | Made in the USA |
Yes. The Gen M3 is optimized for Colt-spec AR-15 and M4 platforms and is fully compatible with both. Modified internal and external geometry also permit operation with a wide range of STANAG 4179-compliant weapons, including the HK 416, MR556, SCAR MK16/16S, IWI Tavor, and others.
Absolutely. The floorplate is slimmer than previous designs specifically to fit well in double and triple magazine pouches without binding or excessive movement.
The Gen M3 features tool-less disassembly, so you can easily field-strip it for cleaning without special equipment. The follower is self-lubricating and the stainless steel spring is corrosion-resistant, keeping maintenance simple.
Yes. A paint pen dot matrix is molded into the bottom panel of the magazine, allowing you to quickly mark and identify different ammunition types or loads without labels.
