Loading...
Loading...
Loading...
Loading...
Magpul
The Magpul MAG1421FDE Hunter Lite Stock is a purpose-built drop-in replacement for Ruger American short-action rifles that strips unnecessary weight and bulk without sacrificing the features serious hunters need. At just 2.6 lbs with two spacers installed, this stock is approximately 25% lighter than Magpul's original Hunter American Stock, making it an ideal choice for hunters who spend all day in the field and every ounce matters. The forend is also nearly 25% narrower than the full-size Hunter, giving you a more refined profile without compromises.
Built with an extruded aluminum V-bedding block and reinforced steel action-screw pillars, the Hunter Lite delivers the rigidity and consistency demanded by hunters who expect their rifles to perform. The stock accepts factory Ruger barrels as well as most aftermarket profiles up to Medium Palma, so you can customize your rifle while keeping the foundation stable. An integrated M-LOK slot system on the forend lets you mount accessories exactly where you need them, whether it's a light, bipod, or other gear.
The Hunter Lite is equally at home in a right or left-handed setup—simply swap the inlet insert to match your rifle, making it a flexible choice for any household. Integral sling swivel studs on both buttstock and forend give you mounting points for slings and bipods, while four removable half-inch spacers let you dial in your length of pull between 13 and 15 inches. A snap-on 3/8-inch cheek riser adjusts comb height to match your optic and shooting position. The enlarged trigger guard and ambidextrous magazine release work seamlessly even when wearing gloves, and the stock accepts AICS-pattern magazines (sold separately) for modern ammunition flexibility.
Magpul built the Hunter Lite in the USA with the practical hunter in mind—no excess, no hype, just a lighter, smarter stock that lets your Ruger American do its job.
| Platform | Ruger American (short-action) |
| Weight | 2.6 lbs with two spacers installed |
| Length of Pull | 13–15 in. (adjustable via spacers) |
| Cheek Height Adjustment | 3/8 in. via included riser |
| Stock Width (max) | 1.75 in. |
| Butt-Pad Dimensions | 1.5 x 4.9 in. |
| Finish | Flat Dark Earth (FDE) |
The Hunter Lite Stock is designed for Ruger American and Ruger American Generation II rifles chambered in short-action calibers. It is compatible with right-hand and left-hand models and accepts most factory and aftermarket triggers and barrels up to Medium Palma diameter. It is not compatible with rifles that came equipped from the factory with an AR-magazine-capable stock.
Yes. The Hunter Lite is user-configurable for both right and left-hand rifles by swapping out the inlet insert. No gunsmithing required—you can change it yourself.
The Hunter Lite weighs 2.6 lbs with two spacers installed. It is approximately 25% lighter than Magpul's original Hunter American Stock, making it an excellent choice for hunters who prioritize lightweight gear for extended field use.
Yes. Four removable half-inch spacers allow you to adjust length of pull from 13 to 15 inches. A snap-on 3/8-inch cheek riser lets you adjust comb height to match your optic and shooting position. Both features are included with the stock.
Magpul
The Magpul MAG1421FDE Hunter Lite Stock is a purpose-built drop-in replacement for Ruger American short-action rifles that strips unnecessary weight and bulk without sacrificing the features serious hunters need. At just 2.6 lbs with two spacers installed, this stock is approximately 25% lighter than Magpul's original Hunter American Stock, making it an ideal choice for hunters who spend all day in the field and every ounce matters. The forend is also nearly 25% narrower than the full-size Hunter, giving you a more refined profile without compromises.
Built with an extruded aluminum V-bedding block and reinforced steel action-screw pillars, the Hunter Lite delivers the rigidity and consistency demanded by hunters who expect their rifles to perform. The stock accepts factory Ruger barrels as well as most aftermarket profiles up to Medium Palma, so you can customize your rifle while keeping the foundation stable. An integrated M-LOK slot system on the forend lets you mount accessories exactly where you need them, whether it's a light, bipod, or other gear.
The Hunter Lite is equally at home in a right or left-handed setup—simply swap the inlet insert to match your rifle, making it a flexible choice for any household. Integral sling swivel studs on both buttstock and forend give you mounting points for slings and bipods, while four removable half-inch spacers let you dial in your length of pull between 13 and 15 inches. A snap-on 3/8-inch cheek riser adjusts comb height to match your optic and shooting position. The enlarged trigger guard and ambidextrous magazine release work seamlessly even when wearing gloves, and the stock accepts AICS-pattern magazines (sold separately) for modern ammunition flexibility.
Magpul built the Hunter Lite in the USA with the practical hunter in mind—no excess, no hype, just a lighter, smarter stock that lets your Ruger American do its job.
| Platform | Ruger American (short-action) |
| Weight | 2.6 lbs with two spacers installed |
| Length of Pull | 13–15 in. (adjustable via spacers) |
| Cheek Height Adjustment | 3/8 in. via included riser |
| Stock Width (max) | 1.75 in. |
| Butt-Pad Dimensions | 1.5 x 4.9 in. |
| Finish | Flat Dark Earth (FDE) |
The Hunter Lite Stock is designed for Ruger American and Ruger American Generation II rifles chambered in short-action calibers. It is compatible with right-hand and left-hand models and accepts most factory and aftermarket triggers and barrels up to Medium Palma diameter. It is not compatible with rifles that came equipped from the factory with an AR-magazine-capable stock.
Yes. The Hunter Lite is user-configurable for both right and left-hand rifles by swapping out the inlet insert. No gunsmithing required—you can change it yourself.
The Hunter Lite weighs 2.6 lbs with two spacers installed. It is approximately 25% lighter than Magpul's original Hunter American Stock, making it an excellent choice for hunters who prioritize lightweight gear for extended field use.
Yes. Four removable half-inch spacers allow you to adjust length of pull from 13 to 15 inches. A snap-on 3/8-inch cheek riser lets you adjust comb height to match your optic and shooting position. Both features are included with the stock.
