Loading...
Loading...
Loading...
Loading...
Magpul
The Magpul Daka universal grid organizer replacement panel gives you the flexibility to add custom organization to almost any hard case or equipment container. Unlike rigid, case-specific inserts, these modular panels can be trimmed to fit your exact setup, making them ideal if you own multiple cases or prefer to configure storage your own way. Built from the same expanded polypropylene (EPP) material as Magpul's fitted DAKA grids, each panel resists liquid and chemical intrusion—a real advantage over traditional open-cell foam that soaks up spills and contamination.
The beauty of this system is versatility without compromise. You can arrange DAKA grid blocks and panels however your firearms, optics, and accessories demand. The serrated bottom surface locks Magpul DAKA gear straps in place so nothing shifts during transport or storage. If you need to accommodate wider gear—scopes, bipods, tactical lights—simply remove or cut out a center panel to make room while keeping everything else braced and protected. At nearly 120 square inches of grid space per panel, you've got room to work with, and at less than 2 ounces, weight is negligible.
Installation is straightforward: measure your case interior, mark the cut lines using the pre-scored guidelines on the panel underside, and trim to fit. Just remember the old rule—measure twice, cut once. Once you cut the panel, it can't be repaired, so take your time with layout planning. These replacement panels stack securely together, making them easy to nest and organize whether you're setting up a single case or managing an entire collection.
| Collection | Magpul DAKA GRID / Hard Cases |
| Type | Universal Grid Replacement Panel |
| Compatibility | Fits most hard cases and containers (custom cut required) |
| Material | Expanded Polypropylene (EPP) |
| Dimensions (per panel) | 13.25" L × 9.75" W × 1" H |
| Weight (per panel) | 1.7 oz. |
| Grid Space | Approximately 120 square inches per panel |
The Magpul Daka universal grid organizer replacement panel is designed to work with most hard cases on the market. Since it requires custom cutting, you'll need to measure your case interior and trim the panel to fit. Pre-marked guidelines on the underside make the process straightforward.
Yes. These replacement panels are part of the Magpul DAKA GRID system and work with DAKA blocks and DAKA gear straps. The serrated bottom of the panel secures the straps to keep your gear from moving during transport.
Once cut, DAKA GRID panels cannot be repaired or reused, so careful measurement is essential. Always measure twice and cut once. Take time with your layout before making any cuts.
Each replacement panel offers approximately 120 square inches of GRID space, giving you room to arrange firearms, optics, and accessories according to your loadout and storage needs.
Magpul
The Magpul Daka universal grid organizer replacement panel gives you the flexibility to add custom organization to almost any hard case or equipment container. Unlike rigid, case-specific inserts, these modular panels can be trimmed to fit your exact setup, making them ideal if you own multiple cases or prefer to configure storage your own way. Built from the same expanded polypropylene (EPP) material as Magpul's fitted DAKA grids, each panel resists liquid and chemical intrusion—a real advantage over traditional open-cell foam that soaks up spills and contamination.
The beauty of this system is versatility without compromise. You can arrange DAKA grid blocks and panels however your firearms, optics, and accessories demand. The serrated bottom surface locks Magpul DAKA gear straps in place so nothing shifts during transport or storage. If you need to accommodate wider gear—scopes, bipods, tactical lights—simply remove or cut out a center panel to make room while keeping everything else braced and protected. At nearly 120 square inches of grid space per panel, you've got room to work with, and at less than 2 ounces, weight is negligible.
Installation is straightforward: measure your case interior, mark the cut lines using the pre-scored guidelines on the panel underside, and trim to fit. Just remember the old rule—measure twice, cut once. Once you cut the panel, it can't be repaired, so take your time with layout planning. These replacement panels stack securely together, making them easy to nest and organize whether you're setting up a single case or managing an entire collection.
| Collection | Magpul DAKA GRID / Hard Cases |
| Type | Universal Grid Replacement Panel |
| Compatibility | Fits most hard cases and containers (custom cut required) |
| Material | Expanded Polypropylene (EPP) |
| Dimensions (per panel) | 13.25" L × 9.75" W × 1" H |
| Weight (per panel) | 1.7 oz. |
| Grid Space | Approximately 120 square inches per panel |
The Magpul Daka universal grid organizer replacement panel is designed to work with most hard cases on the market. Since it requires custom cutting, you'll need to measure your case interior and trim the panel to fit. Pre-marked guidelines on the underside make the process straightforward.
Yes. These replacement panels are part of the Magpul DAKA GRID system and work with DAKA blocks and DAKA gear straps. The serrated bottom of the panel secures the straps to keep your gear from moving during transport.
Once cut, DAKA GRID panels cannot be repaired or reused, so careful measurement is essential. Always measure twice and cut once. Take time with your layout before making any cuts.
Each replacement panel offers approximately 120 square inches of GRID space, giving you room to arrange firearms, optics, and accessories according to your loadout and storage needs.
