Loading...
Loading...
Loading...
Loading...
Lee Precisiom
The Lee Precision 5.7x28 Pacesetter Full Length Sizing 2-Die Set is a two-die reloading set purpose-built for 5.7x28 rifle cartridge handloaders. This set includes everything needed to resize and seat bullets for this high-velocity cartridge: a full length sizing die, a bullet seating die, a universal shell holder, a powder dipper, and comprehensive load data instructions. Whether you're setting up a new 5.7x28 reloading bench or expanding an existing operation, this die set gives you the core dies needed to develop consistent, reliable ammunition.
A critical note for 5.7x28 reloaders: modern 5.7x28 brass often arrives fully annealed from case mouth to rim, which creates special handling requirements during the resizing process. Lee recommends using Lee Resizing Lubricant with this die set to protect soft case material. Additionally, because of this brass softness, standard universal shell holders can deform the rim during sizing; Lee offers the FN Shell Holder (sold separately) specifically designed for this ammunition. The FN holder is for sizing only—you'll still need a standard #15 shell holder for repriming operations. Be aware that 5.7x28 primers are often staked or crimped in place, which may require careful technique during removal and reinsertion.
If you plan to use a Lee Pro Auto-Disk or Auto-Drum Powder Measure with this die set, you'll need the short charging die (LEE90668, sold separately) for compatibility. Lee Resizing Lubricant is essential and not included; factor that into your setup costs. This is a straightforward, no-frills die set from a reloading authority with decades of reliability—ideal for precision shooters and ammunition builders who understand that 5.7x28 demands respect for its unique brass characteristics.
| Cartridge | 5.7x28 |
| Die Set Type | 2-Die Pacesetter Full Length Sizing Set |
| Dies Included | Full Length Sizing Die, Bullet Seating Die |
| Accessories Included | Universal Shell Holder, Powder Dipper, Load Data & Instructions |
| Manufacturer | Lee Precision |
Not without an additional purchase. This die set is compatible with Lee Pro Auto-Disk and Auto-Drum measures, but you'll need to buy the short charging die (LEE90668) separately for proper powder drop alignment.
The set includes a universal shell holder for general use. However, modern 5.7x28 brass is often fully annealed and very soft, which can cause the rim to deform during resizing with a standard holder. Lee recommends the FN Shell Holder (LEE92183, sold separately) specifically for sizing soft 5.7x28 brass. Note: the FN holder is for sizing only; you must use a standard #15 shell holder for repriming.
No. Lee Resizing Lubricant is required for use with this die set but is sold separately. This is essential, especially with soft 5.7x28 brass, so plan to purchase it alongside your dies.
The set contains a full length sizing die, bullet seating die, universal shell holder, powder dipper, and detailed load data instructions. You will need to source lee resizing lubricant and, depending on your brass condition and priming method, may want to invest in the optional FN Shell Holder and short charging die.
Lee Precisiom
The Lee Precision 5.7x28 Pacesetter Full Length Sizing 2-Die Set is a two-die reloading set purpose-built for 5.7x28 rifle cartridge handloaders. This set includes everything needed to resize and seat bullets for this high-velocity cartridge: a full length sizing die, a bullet seating die, a universal shell holder, a powder dipper, and comprehensive load data instructions. Whether you're setting up a new 5.7x28 reloading bench or expanding an existing operation, this die set gives you the core dies needed to develop consistent, reliable ammunition.
A critical note for 5.7x28 reloaders: modern 5.7x28 brass often arrives fully annealed from case mouth to rim, which creates special handling requirements during the resizing process. Lee recommends using Lee Resizing Lubricant with this die set to protect soft case material. Additionally, because of this brass softness, standard universal shell holders can deform the rim during sizing; Lee offers the FN Shell Holder (sold separately) specifically designed for this ammunition. The FN holder is for sizing only—you'll still need a standard #15 shell holder for repriming operations. Be aware that 5.7x28 primers are often staked or crimped in place, which may require careful technique during removal and reinsertion.
If you plan to use a Lee Pro Auto-Disk or Auto-Drum Powder Measure with this die set, you'll need the short charging die (LEE90668, sold separately) for compatibility. Lee Resizing Lubricant is essential and not included; factor that into your setup costs. This is a straightforward, no-frills die set from a reloading authority with decades of reliability—ideal for precision shooters and ammunition builders who understand that 5.7x28 demands respect for its unique brass characteristics.
| Cartridge | 5.7x28 |
| Die Set Type | 2-Die Pacesetter Full Length Sizing Set |
| Dies Included | Full Length Sizing Die, Bullet Seating Die |
| Accessories Included | Universal Shell Holder, Powder Dipper, Load Data & Instructions |
| Manufacturer | Lee Precision |
Not without an additional purchase. This die set is compatible with Lee Pro Auto-Disk and Auto-Drum measures, but you'll need to buy the short charging die (LEE90668) separately for proper powder drop alignment.
The set includes a universal shell holder for general use. However, modern 5.7x28 brass is often fully annealed and very soft, which can cause the rim to deform during resizing with a standard holder. Lee recommends the FN Shell Holder (LEE92183, sold separately) specifically for sizing soft 5.7x28 brass. Note: the FN holder is for sizing only; you must use a standard #15 shell holder for repriming.
No. Lee Resizing Lubricant is required for use with this die set but is sold separately. This is essential, especially with soft 5.7x28 brass, so plan to purchase it alongside your dies.
The set contains a full length sizing die, bullet seating die, universal shell holder, powder dipper, and detailed load data instructions. You will need to source lee resizing lubricant and, depending on your brass condition and priming method, may want to invest in the optional FN Shell Holder and short charging die.
