Loading...
Loading...
Loading...
Loading...
L.E. Wilson
The L.E. Wilson Bushing Type Full Length Sizing Die for 6.5x47 Lapua gives precision reloaders a neck-controlled alternative to full-length sizing. If you're working with quality brass and want to dial in consistent neck tension for better accuracy, this die lets you size the case neck to your exact specs while simultaneously resizing the case body and shoulder. It's the tooling choice for shooters who've discovered that leaving the bottom 3/16" of the case neck unsized—a technique favored by many serious handloaders—produces tighter groups and longer brass life than conventional full-length sizing.
Built from heat-treated steel hardened to L.E. Wilson specifications (harder than Grade 8), this die arrives with an adjustable depth decapping rod and an extra decapping punch, so you're equipped to start work right away. The stainless parts resist corrosion and wear, and the included lock nut is precision-machined to their proprietary dimensions. This die uses interchangeable neck bushings (sold separately) to control how much you size the neck—a feature that sets Wilson dies apart and gives you the fine control serious competitors and long-range hunters demand. Bushing-type sizing also means no expander ball, reducing case neck work hardening and improving consistency shot to shot.
Designed for standard 7/8" reloading presses, the Wilson die handles the full-length sizing operation in a single stroke. Whether you're prepping match brass for a 6.5x47 Lapua competition rifle or building ammunition for precision hunting, this die delivers the accuracy and control that justify the investment in premium reloading equipment.
| Caliber | 6.5x47 Lapua |
| Type | Bushing Type Full Length Sizing Die |
| Press Compatibility | Standard 7/8" reloading press |
| Material | Heat-treated steel (hardened to L.E. Wilson specs) |
| Neck Control Feature | Leaves bottom 3/16" of case neck unsized |
| Included Components | Adjustable depth decapping rod, extra decapping punch, lock nut |
| Lock Nut Dimensions | 0.225" inside to outside edge, 0.270" height, 1.250" total width OD |
| Bushing Type | Interchangeable (sold separately); accepts L.E. Wilson and Redding bushings |
The die accepts interchangeable neck bushings sold separately. L.E. Wilson neck bushings are the standard recommendation, but Redding bushings will also fit. The bushing you choose controls how much you size the case neck, giving you precise control over neck tension.
Yes, neck bushings are sold separately. You'll need to select the correct bushing size for your desired neck tension. This interchangeable system lets you fine-tune sizing for different lots of brass or shooting conditions without buying a new die.
The die includes an adjustable depth decapping rod, an extra decapping punch, and a precision L.E. Wilson manufactured lock nut. You'll need to source the neck bushing separately and have a standard 7/8" reloading press.
This bushing-type die sizes only the bottom 3/16" of the case neck, leaving the upper portion unsized. This approach reduces case neck work hardening, improves consistency, and extends brass life—qualities that competitive shooters and precision handloaders value. There's no expander ball, further reducing unnecessary case manipulation.
L.E. Wilson
The L.E. Wilson Bushing Type Full Length Sizing Die for 6.5x47 Lapua gives precision reloaders a neck-controlled alternative to full-length sizing. If you're working with quality brass and want to dial in consistent neck tension for better accuracy, this die lets you size the case neck to your exact specs while simultaneously resizing the case body and shoulder. It's the tooling choice for shooters who've discovered that leaving the bottom 3/16" of the case neck unsized—a technique favored by many serious handloaders—produces tighter groups and longer brass life than conventional full-length sizing.
Built from heat-treated steel hardened to L.E. Wilson specifications (harder than Grade 8), this die arrives with an adjustable depth decapping rod and an extra decapping punch, so you're equipped to start work right away. The stainless parts resist corrosion and wear, and the included lock nut is precision-machined to their proprietary dimensions. This die uses interchangeable neck bushings (sold separately) to control how much you size the neck—a feature that sets Wilson dies apart and gives you the fine control serious competitors and long-range hunters demand. Bushing-type sizing also means no expander ball, reducing case neck work hardening and improving consistency shot to shot.
Designed for standard 7/8" reloading presses, the Wilson die handles the full-length sizing operation in a single stroke. Whether you're prepping match brass for a 6.5x47 Lapua competition rifle or building ammunition for precision hunting, this die delivers the accuracy and control that justify the investment in premium reloading equipment.
| Caliber | 6.5x47 Lapua |
| Type | Bushing Type Full Length Sizing Die |
| Press Compatibility | Standard 7/8" reloading press |
| Material | Heat-treated steel (hardened to L.E. Wilson specs) |
| Neck Control Feature | Leaves bottom 3/16" of case neck unsized |
| Included Components | Adjustable depth decapping rod, extra decapping punch, lock nut |
| Lock Nut Dimensions | 0.225" inside to outside edge, 0.270" height, 1.250" total width OD |
| Bushing Type | Interchangeable (sold separately); accepts L.E. Wilson and Redding bushings |
The die accepts interchangeable neck bushings sold separately. L.E. Wilson neck bushings are the standard recommendation, but Redding bushings will also fit. The bushing you choose controls how much you size the case neck, giving you precise control over neck tension.
Yes, neck bushings are sold separately. You'll need to select the correct bushing size for your desired neck tension. This interchangeable system lets you fine-tune sizing for different lots of brass or shooting conditions without buying a new die.
The die includes an adjustable depth decapping rod, an extra decapping punch, and a precision L.E. Wilson manufactured lock nut. You'll need to source the neck bushing separately and have a standard 7/8" reloading press.
This bushing-type die sizes only the bottom 3/16" of the case neck, leaving the upper portion unsized. This approach reduces case neck work hardening, improves consistency, and extends brass life—qualities that competitive shooters and precision handloaders value. There's no expander ball, further reducing unnecessary case manipulation.
