Loading...
Loading...
Loading...
Loading...
L.E. Wilson
The L.E. Wilson Bushing Type Full Length Sizing Die for 22-250 gives reloaders precision control over neck tension while sizing the case body in a single stroke. Unlike standard full-length dies, Wilson's bushing design leaves approximately 3/16" of the case neck unsized—a technique many precision shooters prefer for improved accuracy and longer case life. If you're chasing tight groups at the range or hunting at distance, this die lets you dial in the exact neck fit your ammunition demands.
Built from heat-treated steel hardened to L.E. Wilson specifications (harder than a Grade 8 bolt), this die is engineered for durability and repeatable accuracy. The adjustable depth decapping rod gives you control over primer removal, and you get a spare decapping punch in the box. Stainless steel components resist corrosion, so your die stays reliable through years of reloading. The die threads into standard 7/8" reloading presses and handles full-length sizing of shoulder and body dimensions in one operation.
Note that this die does not include an expander, and neck bushings are sold separately—L.E. Wilson bushings are the factory match, though Redding bushings will also fit. Choose your bushing diameter based on your target neck tension for your specific load and brass. This is serious reloading equipment for shooters who understand the relationship between neck fit and consistency.
| Product Type | Full Length Bushing Sizing Die |
| Caliber | 22-250 |
| Press Compatibility | 7/8" standard reloading press |
| Material | Heat-treated steel (hardened to L.E. Wilson specs) |
| Neck Design | Bushing type; leaves 3/16" of neck unsized |
| Decapping | Adjustable depth decapping rod; spare punch included |
| Expander | Not included |
| Bushing | Sold separately; accepts L.E. Wilson or Redding bushings |
| Lock Nut Dimensions | 0.225" thickness (inside to outside edge), 0.270" height, 1.250" OD |
The die itself, an adjustable depth decapping rod, and one spare decapping punch. Neck bushings are sold separately.
L.E. Wilson neck bushings are the factory match. Redding bushings will also fit if you prefer them, but you'll need to purchase the bushing separately.
Many precision shooters find that partial neck sizing reduces case neck tension variation and improves accuracy compared to sizing the entire neck. It also can extend case life.
Yes, if your press has standard 7/8" die threads. This die is designed for full-length sizing and works on any compatible press.
L.E. Wilson
The L.E. Wilson Bushing Type Full Length Sizing Die for 22-250 gives reloaders precision control over neck tension while sizing the case body in a single stroke. Unlike standard full-length dies, Wilson's bushing design leaves approximately 3/16" of the case neck unsized—a technique many precision shooters prefer for improved accuracy and longer case life. If you're chasing tight groups at the range or hunting at distance, this die lets you dial in the exact neck fit your ammunition demands.
Built from heat-treated steel hardened to L.E. Wilson specifications (harder than a Grade 8 bolt), this die is engineered for durability and repeatable accuracy. The adjustable depth decapping rod gives you control over primer removal, and you get a spare decapping punch in the box. Stainless steel components resist corrosion, so your die stays reliable through years of reloading. The die threads into standard 7/8" reloading presses and handles full-length sizing of shoulder and body dimensions in one operation.
Note that this die does not include an expander, and neck bushings are sold separately—L.E. Wilson bushings are the factory match, though Redding bushings will also fit. Choose your bushing diameter based on your target neck tension for your specific load and brass. This is serious reloading equipment for shooters who understand the relationship between neck fit and consistency.
| Product Type | Full Length Bushing Sizing Die |
| Caliber | 22-250 |
| Press Compatibility | 7/8" standard reloading press |
| Material | Heat-treated steel (hardened to L.E. Wilson specs) |
| Neck Design | Bushing type; leaves 3/16" of neck unsized |
| Decapping | Adjustable depth decapping rod; spare punch included |
| Expander | Not included |
| Bushing | Sold separately; accepts L.E. Wilson or Redding bushings |
| Lock Nut Dimensions | 0.225" thickness (inside to outside edge), 0.270" height, 1.250" OD |
The die itself, an adjustable depth decapping rod, and one spare decapping punch. Neck bushings are sold separately.
L.E. Wilson neck bushings are the factory match. Redding bushings will also fit if you prefer them, but you'll need to purchase the bushing separately.
Many precision shooters find that partial neck sizing reduces case neck tension variation and improves accuracy compared to sizing the entire neck. It also can extend case life.
Yes, if your press has standard 7/8" die threads. This die is designed for full-length sizing and works on any compatible press.
