Loading...
Loading...
Loading...
Loading...
IWI US
The IWI TAVOR X95 left-handed 5.56 conversion kit transforms your existing Tavor platform rifle into a dedicated NATO rifle without starting from scratch. Built around IWI's proven cold hammer-forged barrel with a 1:7 right-hand twist rate, this conversion delivers the accuracy and durability you expect from a modern direct impingement rifle. The 16.5-inch barrel length strikes a practical balance for both defensive and recreational shooting, while the left-hand bolt and complete bolt carrier assembly ensure proper function for southpaw shooters—a feature that stands out since most 5.56 conversions default to right-hand only.
Conversion kits appeal to shooters who already own a Tavor platform and want to diversify their caliber options without buying an entirely new rifle. This kit includes everything you need to make that switch: a finished barrel assembly with A2 flash suppressor already attached, the left-hand bolt group and recoil components, a barrel wrench for straightforward installation, and a 5.56-specific deflector and frame to manage spent brass properly. You'll also get one Magpul PMAG Gen M3 30-round magazine with witness window, so you can start shooting immediately after install.
The cold hammer-forged barrel is built from CrMoV steel—a material choice that prioritizes longevity and corrosion resistance over cost. That matters if you're planning to run this rifle hard or store it in less-than-ideal conditions. The 1:7 twist is optimized to stabilize everything from lightweight 55-grain training rounds up to heavier match-grade 77-grain loads, giving you genuine flexibility at the range or in the field. Left-handed shooters familiar with the Tavor's ergonomics will find the transition seamless; this kit respects that platform's design rather than forcing a compromise.
IWI's conversion approach is straightforward mechanically—you're swapping the barrel group and bolt assembly—but success depends on following proper installation steps. If you're new to Tavor platforms, consider having a gunsmith or experienced armorer do the work to ensure timing and function are spot-on.
| Caliber | 5.56 NATO |
| Barrel Length | 16.5 inches |
| Barrel Material | CrMoV Steel, Cold Hammer Forged |
| Twist Rate | 1:7 Right-Hand |
| Magazine Capacity | 30 Rounds |
| Bolt Configuration | Left-Handed |
| Muzzle Device | A2 Flash Suppressor |
| Included Accessories | Bolt carrier group, recoil assembly, deflector, deflector frame, barrel wrench, Magpul PMAG Gen M3 magazine |
Yes, this kit is designed as a conversion for the Tavor X95 platform. You'll be swapping the barrel group and bolt assembly. Proper installation is critical for reliability and safety; if you're unfamiliar with the process, have a qualified gunsmith perform the work.
Yes. This kit includes a dedicated left-hand bolt and complete left-hand bolt carrier assembly, ensuring the rifle functions properly for left-handed shooters and won't eject brass across your face or force you to manipulate controls from an awkward position.
The 1:7 twist is optimized for the full range of common 5.56 NATO loads, from 55-grain standard training rounds to heavier match-grade ammunition in the 77-grain range. This versatility is one advantage of the 1:7 rate over faster or slower alternatives.
The kit includes the 16.5-inch barrel with A2 flash suppressor attached, left-hand bolt and bolt carrier assembly, recoil assembly components, 5.56 deflector and deflector frame, a barrel wrench, and one Magpul PMAG Gen M3 30-round magazine with witness window. You'll have everything needed to complete the conversion and fire immediately after installation.
IWI US
The IWI TAVOR X95 left-handed 5.56 conversion kit transforms your existing Tavor platform rifle into a dedicated NATO rifle without starting from scratch. Built around IWI's proven cold hammer-forged barrel with a 1:7 right-hand twist rate, this conversion delivers the accuracy and durability you expect from a modern direct impingement rifle. The 16.5-inch barrel length strikes a practical balance for both defensive and recreational shooting, while the left-hand bolt and complete bolt carrier assembly ensure proper function for southpaw shooters—a feature that stands out since most 5.56 conversions default to right-hand only.
Conversion kits appeal to shooters who already own a Tavor platform and want to diversify their caliber options without buying an entirely new rifle. This kit includes everything you need to make that switch: a finished barrel assembly with A2 flash suppressor already attached, the left-hand bolt group and recoil components, a barrel wrench for straightforward installation, and a 5.56-specific deflector and frame to manage spent brass properly. You'll also get one Magpul PMAG Gen M3 30-round magazine with witness window, so you can start shooting immediately after install.
The cold hammer-forged barrel is built from CrMoV steel—a material choice that prioritizes longevity and corrosion resistance over cost. That matters if you're planning to run this rifle hard or store it in less-than-ideal conditions. The 1:7 twist is optimized to stabilize everything from lightweight 55-grain training rounds up to heavier match-grade 77-grain loads, giving you genuine flexibility at the range or in the field. Left-handed shooters familiar with the Tavor's ergonomics will find the transition seamless; this kit respects that platform's design rather than forcing a compromise.
IWI's conversion approach is straightforward mechanically—you're swapping the barrel group and bolt assembly—but success depends on following proper installation steps. If you're new to Tavor platforms, consider having a gunsmith or experienced armorer do the work to ensure timing and function are spot-on.
| Caliber | 5.56 NATO |
| Barrel Length | 16.5 inches |
| Barrel Material | CrMoV Steel, Cold Hammer Forged |
| Twist Rate | 1:7 Right-Hand |
| Magazine Capacity | 30 Rounds |
| Bolt Configuration | Left-Handed |
| Muzzle Device | A2 Flash Suppressor |
| Included Accessories | Bolt carrier group, recoil assembly, deflector, deflector frame, barrel wrench, Magpul PMAG Gen M3 magazine |
Yes, this kit is designed as a conversion for the Tavor X95 platform. You'll be swapping the barrel group and bolt assembly. Proper installation is critical for reliability and safety; if you're unfamiliar with the process, have a qualified gunsmith perform the work.
Yes. This kit includes a dedicated left-hand bolt and complete left-hand bolt carrier assembly, ensuring the rifle functions properly for left-handed shooters and won't eject brass across your face or force you to manipulate controls from an awkward position.
The 1:7 twist is optimized for the full range of common 5.56 NATO loads, from 55-grain standard training rounds to heavier match-grade ammunition in the 77-grain range. This versatility is one advantage of the 1:7 rate over faster or slower alternatives.
The kit includes the 16.5-inch barrel with A2 flash suppressor attached, left-hand bolt and bolt carrier assembly, recoil assembly components, 5.56 deflector and deflector frame, a barrel wrench, and one Magpul PMAG Gen M3 30-round magazine with witness window. You'll have everything needed to complete the conversion and fire immediately after installation.
