Loading...
Loading...
Loading...
Loading...
Dead Air
The Dead Air Armament Hub Direct Thread Mount 3/4X24 is a fixed muzzle adapter that expands your suppressor mounting options across multiple firearms. If you run a HUB-compatible silencer like the Nomad or Primal, this direct thread insert lets you attach your can to any rifle with a 3/4x24 threaded barrel—a common pitch on modern precision rifles and tactical builds. It's the bridge between your suppressor's quick-detach system and barrels that don't share Dead Air's standard mounting interface.
Built from 4140 heat-treated alloy steel and finished in QPQ black nitride, this mount is engineered for durability and corrosion resistance in the field or at the range. The nitride coating doesn't just look clean—it hardens the steel and resists wear from repeated mounting cycles and environmental exposure. At under 2 ounces, it adds negligible weight to your rifle's muzzle while maintaining the rock-solid connection HUB-compatible suppressors are known for.
Installation is straightforward: thread it onto your 3/4x24 barrel, then attach your HUB suppressor. No special tools required. This is essential gear if you own multiple HUB cans or plan to move a single suppressor between rifles with different muzzle threads. Whether you're setting up a long-range hunter, a precision rifle, or a dedicated suppressed upper, this adapter eliminates the need to buy separate suppressors for different thread pitches.
| Brand | Dead Air Armament |
| Mount Type | HUB Direct Thread |
| Thread Pitch | 3/4x24 |
| Material | 4140 HT Alloy Steel |
| Finish | QPQ Black Nitride |
| Overall Length | 0.765 inches |
| Weight | 1.60 ounces |
This adapter works with any Dead Air HUB-compatible suppressor, including the Nomad and Primal models. As long as your silencer features the HUB quick-detach system, this mount will accept it.
Yes. This is a direct thread mount designed specifically for 3/4x24 muzzle threads. Thread it on your barrel the same way you would a muzzle brake or flash hider, then attach your HUB suppressor.
The mount itself threads directly onto your barrel, so it stays on your rifle. Your HUB suppressor, however, attaches and detaches quickly via the HUB interface, allowing you to move the can between barrels with different adapters or use it without suppression when needed.
If you have multiple rifles with 3/4x24 barrels, you can use a single mount on each barrel and share one HUB suppressor between them—a cost-effective way to suppress multiple firearms.
Dead Air
The Dead Air Armament Hub Direct Thread Mount 3/4X24 is a fixed muzzle adapter that expands your suppressor mounting options across multiple firearms. If you run a HUB-compatible silencer like the Nomad or Primal, this direct thread insert lets you attach your can to any rifle with a 3/4x24 threaded barrel—a common pitch on modern precision rifles and tactical builds. It's the bridge between your suppressor's quick-detach system and barrels that don't share Dead Air's standard mounting interface.
Built from 4140 heat-treated alloy steel and finished in QPQ black nitride, this mount is engineered for durability and corrosion resistance in the field or at the range. The nitride coating doesn't just look clean—it hardens the steel and resists wear from repeated mounting cycles and environmental exposure. At under 2 ounces, it adds negligible weight to your rifle's muzzle while maintaining the rock-solid connection HUB-compatible suppressors are known for.
Installation is straightforward: thread it onto your 3/4x24 barrel, then attach your HUB suppressor. No special tools required. This is essential gear if you own multiple HUB cans or plan to move a single suppressor between rifles with different muzzle threads. Whether you're setting up a long-range hunter, a precision rifle, or a dedicated suppressed upper, this adapter eliminates the need to buy separate suppressors for different thread pitches.
| Brand | Dead Air Armament |
| Mount Type | HUB Direct Thread |
| Thread Pitch | 3/4x24 |
| Material | 4140 HT Alloy Steel |
| Finish | QPQ Black Nitride |
| Overall Length | 0.765 inches |
| Weight | 1.60 ounces |
This adapter works with any Dead Air HUB-compatible suppressor, including the Nomad and Primal models. As long as your silencer features the HUB quick-detach system, this mount will accept it.
Yes. This is a direct thread mount designed specifically for 3/4x24 muzzle threads. Thread it on your barrel the same way you would a muzzle brake or flash hider, then attach your HUB suppressor.
The mount itself threads directly onto your barrel, so it stays on your rifle. Your HUB suppressor, however, attaches and detaches quickly via the HUB interface, allowing you to move the can between barrels with different adapters or use it without suppression when needed.
If you have multiple rifles with 3/4x24 barrels, you can use a single mount on each barrel and share one HUB suppressor between them—a cost-effective way to suppress multiple firearms.
