HiViz HHVS41 Interchangeable Front & Rear Sight Set for Henry Rifles - BlackHi-Viz$33.49
Loading...
Loading...
Loading...
Loading...
Hi-Viz
The HIVIZ Universal 7/16″ Dovetail Interchangeable Front Rifle Sight is a solid upgrade for hunters and shooters running rimfire or centerfire rifles with a 3/8″ dovetail front sight mounting. Built from steel that handles the recoil and elements, this sight swaps in without gunsmithing and comes ready with both green and red LitePipes—so you can pick the color that cuts through your shooting conditions, whether that's bright sun, overcast skies, or shade. If you're tired of squinting at a worn or inadequate factory front sight, this is a practical, no-fuss replacement that works across a wide range of rifle platforms.
The interchangeable pipe system is the real win here. Green and red LitePipes let you dial in the sight picture that works best for that day's light or your own eyes—no need to carry a spare sight or compromise on visibility. Steel construction means it'll hold zero and take whatever you throw at it, whether you're shooting iron-sight deer hunts, running drills at the range, or working with a muzzleloader. Height is measured from the bottom of the dovetail to the top of the sight, so verify your sight picture before and after installation.
This is the kind of straightforward gear that works: no complicated adjustments, no electronics to fail, just a durable front sight that gives you the tool to see your target clearly. If your rifle's dovetail slot is the standard 3/8″ width, this sight will fit, and you'll get a meaningful boost in sight picture quality and adaptability.
| Dovetail Slot Width | 3/8″ |
| Material | Steel |
| Included LitePipes | Green and red interchangeable |
| Compatible Firearms | Rimfire and centerfire rifles; muzzleloaders with 3/8″ dovetail |
Yes, if your rifle has a 3/8″ dovetail front sight slot. This sight is designed as a universal replacement for that standard dovetail width and works across rimfire, centerfire, and muzzleloader platforms.
Both are included. Green and red handle different light conditions—green often performs well in shade or low light, while red can cut through bright sunlight. You can swap pipes on the spot depending on what you're shooting and the day's conditions.
Height is measured from the bottom of the dovetail (where it seats in your rifle) to the top of the sight. Check your rifle's original sight height or consult your rifle manual to confirm proper sight picture alignment.
No. This is a direct dovetail replacement—it slides into your existing 3/8″ dovetail slot without modification. Standard installation tools are all you need.
Hi-Viz
The HIVIZ Universal 7/16″ Dovetail Interchangeable Front Rifle Sight is a solid upgrade for hunters and shooters running rimfire or centerfire rifles with a 3/8″ dovetail front sight mounting. Built from steel that handles the recoil and elements, this sight swaps in without gunsmithing and comes ready with both green and red LitePipes—so you can pick the color that cuts through your shooting conditions, whether that's bright sun, overcast skies, or shade. If you're tired of squinting at a worn or inadequate factory front sight, this is a practical, no-fuss replacement that works across a wide range of rifle platforms.
The interchangeable pipe system is the real win here. Green and red LitePipes let you dial in the sight picture that works best for that day's light or your own eyes—no need to carry a spare sight or compromise on visibility. Steel construction means it'll hold zero and take whatever you throw at it, whether you're shooting iron-sight deer hunts, running drills at the range, or working with a muzzleloader. Height is measured from the bottom of the dovetail to the top of the sight, so verify your sight picture before and after installation.
This is the kind of straightforward gear that works: no complicated adjustments, no electronics to fail, just a durable front sight that gives you the tool to see your target clearly. If your rifle's dovetail slot is the standard 3/8″ width, this sight will fit, and you'll get a meaningful boost in sight picture quality and adaptability.
| Dovetail Slot Width | 3/8″ |
| Material | Steel |
| Included LitePipes | Green and red interchangeable |
| Compatible Firearms | Rimfire and centerfire rifles; muzzleloaders with 3/8″ dovetail |
Yes, if your rifle has a 3/8″ dovetail front sight slot. This sight is designed as a universal replacement for that standard dovetail width and works across rimfire, centerfire, and muzzleloader platforms.
Both are included. Green and red handle different light conditions—green often performs well in shade or low light, while red can cut through bright sunlight. You can swap pipes on the spot depending on what you're shooting and the day's conditions.
Height is measured from the bottom of the dovetail (where it seats in your rifle) to the top of the sight. Check your rifle's original sight height or consult your rifle manual to confirm proper sight picture alignment.
No. This is a direct dovetail replacement—it slides into your existing 3/8″ dovetail slot without modification. Standard installation tools are all you need.
