Loading...
Loading...
Loading...
Loading...
Gg&G
The Gg&G Mini Red Dot Mount is a no-gunsmithing aluminum solution for mounting modern red dot sights on Ranch Rifles equipped with factory scope rings. This receiver-mounted platform clamps directly to your rifle's existing receiver notches, letting you upgrade to current tactical optics without trips to a gunsmith. At almost 6 inches long, it gives you genuine flexibility: mount your mini red dot well forward for extended eye relief and fast target acquisition, or position it back for a solid cheekweld—the choice is yours depending on your shooting style and rifle setup.
Gg&G engineered this mount with practical field use in mind. Machined relief cuts on the underside keep your brass flowing freely, so cartridge ejection stays unobstructed even under rapid fire. The mount accepts mini red dot and holographic optics from proven names: Burris, Docter, JP, and Trijicon. If you prefer the flexibility of standard Picatinny rings, the mount features a full-length MIL-STD-1913 rail with 14 slots, so you can run conventional scope rings and a wider range of sighting systems.
Whether you're running a tactical red dot for 3-gun, a compact holographic sight for hunting, or planning to experiment with different optics over time, this mount delivers the versatility serious shooters expect. Installation takes minutes, no permanent modifications required.
| Mount Type | Receiver clamp (Ranch Rifle factory scope ring notches) |
| Length | Approximately 6 inches |
| Optic Compatibility | Mini red dot and holographic sights; Picatinny ring-mounted optics via included rail |
| Rail Standard | MIL-STD-1913 Picatinny with 14 slots |
| Material | Aluminum |
| Installation | No gunsmithing required |
The Gg&G Mini Red Dot Mount accepts mini red dot and holographic optics from Burris, Docter, JP, and Trijicon. It also features a full-length MIL-STD-1913 Picatinny rail with 14 slots, so you can mount conventional Picatinny scope rings and use a broader range of optics over time.
Yes—it clamps directly to the factory scope ring notches on the receiver, so installation requires no gunsmithing or permanent modifications. Check your rifle's manual or examine your receiver notches to confirm compatibility.
No. Gg&G machined relief cuts on the underside of the mount to ensure brass ejects freely without obstruction, even during rapid fire.
At nearly 6 inches long, the mount provides plenty of room to position your optic forward for extended eye relief and faster target acquisition, or back toward the receiver for a more traditional cheekweld—you control the placement based on your shooting needs.
Gg&G
The Gg&G Mini Red Dot Mount is a no-gunsmithing aluminum solution for mounting modern red dot sights on Ranch Rifles equipped with factory scope rings. This receiver-mounted platform clamps directly to your rifle's existing receiver notches, letting you upgrade to current tactical optics without trips to a gunsmith. At almost 6 inches long, it gives you genuine flexibility: mount your mini red dot well forward for extended eye relief and fast target acquisition, or position it back for a solid cheekweld—the choice is yours depending on your shooting style and rifle setup.
Gg&G engineered this mount with practical field use in mind. Machined relief cuts on the underside keep your brass flowing freely, so cartridge ejection stays unobstructed even under rapid fire. The mount accepts mini red dot and holographic optics from proven names: Burris, Docter, JP, and Trijicon. If you prefer the flexibility of standard Picatinny rings, the mount features a full-length MIL-STD-1913 rail with 14 slots, so you can run conventional scope rings and a wider range of sighting systems.
Whether you're running a tactical red dot for 3-gun, a compact holographic sight for hunting, or planning to experiment with different optics over time, this mount delivers the versatility serious shooters expect. Installation takes minutes, no permanent modifications required.
| Mount Type | Receiver clamp (Ranch Rifle factory scope ring notches) |
| Length | Approximately 6 inches |
| Optic Compatibility | Mini red dot and holographic sights; Picatinny ring-mounted optics via included rail |
| Rail Standard | MIL-STD-1913 Picatinny with 14 slots |
| Material | Aluminum |
| Installation | No gunsmithing required |
The Gg&G Mini Red Dot Mount accepts mini red dot and holographic optics from Burris, Docter, JP, and Trijicon. It also features a full-length MIL-STD-1913 Picatinny rail with 14 slots, so you can mount conventional Picatinny scope rings and use a broader range of optics over time.
Yes—it clamps directly to the factory scope ring notches on the receiver, so installation requires no gunsmithing or permanent modifications. Check your rifle's manual or examine your receiver notches to confirm compatibility.
No. Gg&G machined relief cuts on the underside of the mount to ensure brass ejects freely without obstruction, even during rapid fire.
At nearly 6 inches long, the mount provides plenty of room to position your optic forward for extended eye relief and faster target acquisition, or back toward the receiver for a more traditional cheekweld—you control the placement based on your shooting needs.
