Loading...
Loading...
Loading...
Loading...
Flatline Ops
Cant error—that slight tilt of the rifle that throws your zero off without you even knowing—is one of the sneakiest accuracy killers on the range or in the field. The Flatline Ops Sniper 34mm Articulating Scope Level is a straightforward tool designed to eliminate that problem by giving you a dead-on vertical reference right on your scope tube. Whether you're dialing in a precision rifle for long-range hunting, running a competition course, or fine-tuning a tactical build, this scope level clamps directly to your 34mm tube and lets you confirm your gun is truly plumb before you take the shot.
The design is built for speed. A bright fluorescent yellow bubble pivots out for quick verification when you need it, then folds flat against the scope for storage and transport. The ring clamp system uses two stainless steel Allen head screws to lock down tight, and the whole assembly works equally well for left- and right-handed shooters. If you want to go deeper into cant correction or add a cosine indicator to your setup, the integral dovetail accepts Flatline's Strong Arm Mount for expandability down the road.
This isn't a complicated piece of gear—it's a single-purpose accessory that does one job and does it well. If you've ever discovered mid-match or mid-hunt that you were holding cant without realizing it, you'll understand why shooters who care about precision keep a level on their scope. It's especially valuable for shooters building out a 34mm scope setup where eliminating even small sources of error matters.
| Manufacturer | Flatline Ops |
| Scope Tube Diameter | 34mm |
| Clamp Type | Ring clamp with stainless steel Allen head screws |
| Bubble Color | Fluorescent yellow |
| Design | Articulating (pivots/folds) |
| Accessory Mount | Integral dovetail for Strong Arm Mount |
Yes, the Flatline Ops Sniper is designed specifically for 34mm scope tubes. If your scope is a different diameter (1" or 30mm), you'll need the model sized for your tube.
Yes. The design accommodates both left- and right-handed shooters, so it works regardless of your shooting side.
The scope level includes an integral accessory dovetail that accepts the Flatline Ops Strong Arm Mount, which allows you to attach a cosine indicator if you want to expand your cant-correction setup.
The fluorescent yellow bubble pivots out when you need to check cant, then swings back and folds flat over the top of the scope for compact storage and transport.
Flatline Ops
Cant error—that slight tilt of the rifle that throws your zero off without you even knowing—is one of the sneakiest accuracy killers on the range or in the field. The Flatline Ops Sniper 34mm Articulating Scope Level is a straightforward tool designed to eliminate that problem by giving you a dead-on vertical reference right on your scope tube. Whether you're dialing in a precision rifle for long-range hunting, running a competition course, or fine-tuning a tactical build, this scope level clamps directly to your 34mm tube and lets you confirm your gun is truly plumb before you take the shot.
The design is built for speed. A bright fluorescent yellow bubble pivots out for quick verification when you need it, then folds flat against the scope for storage and transport. The ring clamp system uses two stainless steel Allen head screws to lock down tight, and the whole assembly works equally well for left- and right-handed shooters. If you want to go deeper into cant correction or add a cosine indicator to your setup, the integral dovetail accepts Flatline's Strong Arm Mount for expandability down the road.
This isn't a complicated piece of gear—it's a single-purpose accessory that does one job and does it well. If you've ever discovered mid-match or mid-hunt that you were holding cant without realizing it, you'll understand why shooters who care about precision keep a level on their scope. It's especially valuable for shooters building out a 34mm scope setup where eliminating even small sources of error matters.
| Manufacturer | Flatline Ops |
| Scope Tube Diameter | 34mm |
| Clamp Type | Ring clamp with stainless steel Allen head screws |
| Bubble Color | Fluorescent yellow |
| Design | Articulating (pivots/folds) |
| Accessory Mount | Integral dovetail for Strong Arm Mount |
Yes, the Flatline Ops Sniper is designed specifically for 34mm scope tubes. If your scope is a different diameter (1" or 30mm), you'll need the model sized for your tube.
Yes. The design accommodates both left- and right-handed shooters, so it works regardless of your shooting side.
The scope level includes an integral accessory dovetail that accepts the Flatline Ops Strong Arm Mount, which allows you to attach a cosine indicator if you want to expand your cant-correction setup.
The fluorescent yellow bubble pivots out when you need to check cant, then swings back and folds flat over the top of the scope for compact storage and transport.
