EoTech EXPS3 Tan Holosight - 68 MOA Ring & 1 MOA Dot, CR123 Battery, Side ButtonEotech$815.00
Loading...
Loading...
Loading...
Loading...
Eotech
The EoTech EXPS3 tan holosight brings true two-eyes-open shooting to close-quarters rifle setups, carbines, and CQB platforms where speed and situational awareness matter most. Built on a proven design trusted by U.S. Special Operations Command, this compact reflex sight pairs a 68 MOA ring with dual 1 MOA center dots—a reticle geometry that lets you engage fast at any distance while maintaining a crystal-clear sight picture. The low-profile 7mm raised base preserves co-witness with backup iron sights and keeps the optic in the fight.
Quick target acquisition is the whole point of a holosight, and the EXPS3 delivers. Its side-button operation keeps your firing hand steady, while the adjustable quick-detach lever mounts to standard Weaver or MIL-STD 1913 rails with repeatable accuracy to 1 MOA after remounting. Night vision compatible across Gen I through III+ devices, the EXPS3 runs 20 daylight brightness levels plus 10 additional NV settings, letting you stay operational from first light to after dark. A single CR123 battery (included) powers 1,000 continuous hours at nominal brightness—roughly 40 days of runtime without a battery swap.
Weather resistance to 33 feet of water depth and an operating envelope from –40°F to 140°F mean this sight keeps running in conditions where lesser optics fade. The compact footprint (3.8" × 2.3" × 2.9") and featherweight 11.2 oz profile won't bog down a rifle build or slow your transitions. Made in the USA, the EXPS3 comes with a protective case, quick-start guide, warranty card, and that CR123 battery ready to go.
| Reticle | 68 MOA ring with dual 1 MOA dots |
| Mount | 1" Weaver or MIL-STD-1913 rail |
| Adjustment | 0.5 MOA per click windage and elevation |
| Brightness Settings | 20 daylight + 10 night vision levels |
| Power Source | 1 × CR123 lithium battery (included) |
| Battery Life | 1,000 continuous hours at nominal setting |
| Night Vision | Compatible with Gen I–III+ devices |
| Water Resistance | 33 feet (10 m) depth |
| Operating Temperature | –40°F to 140°F (–40°C to 60°C) |
| Dimensions | 3.8" L × 2.3" W × 2.9" H (96.5 × 58.4 × 73.7 mm) |
| Weight | 11.2 oz (317.5 g) |
| Quick-Detach | Adjustable lever; repeatable to 1 MOA |
| Included | CR123 battery, protective case, quick-start guide, warranty card |
| Origin | Made in USA |
Yes. The 7mm raised base allows the sight to co-witness with standard backup iron sights mounted on the same rail, letting you keep irons in the fight as a backup or secondary aiming reference.
Absolutely. The EXPS3 is night vision compatible and features 10 dedicated brightness settings optimized for Gen I through Gen III+ night vision devices, making it a solid choice for low-light and nocturnal operations.
The included CR123 battery provides 1,000 continuous hours of runtime at the nominal brightness setting 12. That's roughly 40 days of non-stop use on a single battery, or months of typical daily operation.
The EXPS3 ships with the holosight, one CR123 battery pre-installed, a protective case, quick-start guide, and a warranty card. It's ready to mount and run straight out of the box.
Eotech
The EoTech EXPS3 tan holosight brings true two-eyes-open shooting to close-quarters rifle setups, carbines, and CQB platforms where speed and situational awareness matter most. Built on a proven design trusted by U.S. Special Operations Command, this compact reflex sight pairs a 68 MOA ring with dual 1 MOA center dots—a reticle geometry that lets you engage fast at any distance while maintaining a crystal-clear sight picture. The low-profile 7mm raised base preserves co-witness with backup iron sights and keeps the optic in the fight.
Quick target acquisition is the whole point of a holosight, and the EXPS3 delivers. Its side-button operation keeps your firing hand steady, while the adjustable quick-detach lever mounts to standard Weaver or MIL-STD 1913 rails with repeatable accuracy to 1 MOA after remounting. Night vision compatible across Gen I through III+ devices, the EXPS3 runs 20 daylight brightness levels plus 10 additional NV settings, letting you stay operational from first light to after dark. A single CR123 battery (included) powers 1,000 continuous hours at nominal brightness—roughly 40 days of runtime without a battery swap.
Weather resistance to 33 feet of water depth and an operating envelope from –40°F to 140°F mean this sight keeps running in conditions where lesser optics fade. The compact footprint (3.8" × 2.3" × 2.9") and featherweight 11.2 oz profile won't bog down a rifle build or slow your transitions. Made in the USA, the EXPS3 comes with a protective case, quick-start guide, warranty card, and that CR123 battery ready to go.
| Reticle | 68 MOA ring with dual 1 MOA dots |
| Mount | 1" Weaver or MIL-STD-1913 rail |
| Adjustment | 0.5 MOA per click windage and elevation |
| Brightness Settings | 20 daylight + 10 night vision levels |
| Power Source | 1 × CR123 lithium battery (included) |
| Battery Life | 1,000 continuous hours at nominal setting |
| Night Vision | Compatible with Gen I–III+ devices |
| Water Resistance | 33 feet (10 m) depth |
| Operating Temperature | –40°F to 140°F (–40°C to 60°C) |
| Dimensions | 3.8" L × 2.3" W × 2.9" H (96.5 × 58.4 × 73.7 mm) |
| Weight | 11.2 oz (317.5 g) |
| Quick-Detach | Adjustable lever; repeatable to 1 MOA |
| Included | CR123 battery, protective case, quick-start guide, warranty card |
| Origin | Made in USA |
Yes. The 7mm raised base allows the sight to co-witness with standard backup iron sights mounted on the same rail, letting you keep irons in the fight as a backup or secondary aiming reference.
Absolutely. The EXPS3 is night vision compatible and features 10 dedicated brightness settings optimized for Gen I through Gen III+ night vision devices, making it a solid choice for low-light and nocturnal operations.
The included CR123 battery provides 1,000 continuous hours of runtime at the nominal brightness setting 12. That's roughly 40 days of non-stop use on a single battery, or months of typical daily operation.
The EXPS3 ships with the holosight, one CR123 battery pre-installed, a protective case, quick-start guide, and a warranty card. It's ready to mount and run straight out of the box.