Loading...
Loading...
Loading...
Loading...
EGW
The EGW Winchester XPR LA 1-piece Picatinny base with 20 MOA elevation is built for shooters who plan to stretch their shots past 500 yards. If you're running a Winchester XPR in .300 Win Mag or another long-action cartridge and want a solid, no-nonsense mounting solution for long-range hunting or tactical work, this one-piece base delivers the angle and rigidity you need without the complexity of stacked shims.
EGW machines these bases in-house and finishes them with tumble, sand blast, and Type II anodizing—the kind of process that builds durability into the metal rather than just coating it. The beveled edges on both sides are ambidextrous, so it doesn't matter how you mount it. The Picatinny cross slots run the full length of the rail, giving you freedom to position your rings exactly where they need to be. The center channel design keeps weight down and, in most setups, won't block your factory iron sights if you want to keep them as a backup.
Setup is straightforward: torque the base to 20 inch-lbs with a drop of blue threadlocker (sold separately), then zero at 200 yards. The 20 MOA angle is purpose-built for the 500–1000 yard range; if you're hunting closer distances, EGW also makes a 0 MOA version. Every component—base, hardware, wrench, and packaging—is USA-made.
| Brand | EGW |
| Rifle Compatibility | Winchester XPR LA (Long Action) |
| Rail Type | Picatinny |
| Base Style | One-piece |
| Elevation Angle | 20 MOA |
| Finish | Type II Anodized |
| Mounting Torque | 20 inch-lbs |
| Recommended Zero Distance (20 MOA) | 200 yards |
| Manufacturing | USA |
This base is designed for the Winchester XPR in Long Action. EGW recommends verifying that your receiver's hole spacing matches their published dimensions before ordering. If you're unsure, measure the distance between your action's mounting holes and compare to EGW's specs.
EGW recommends zeroing at 200 yards when using the 20 MOA base. This angle is optimized for shooting between 500 and 1000 yards; if you're hunting or shooting in closer ranges, their 0 MOA version may be more appropriate.
In most cases, no. The center channel design of this base reduces material where possible, which often allows factory iron sights to coexist underneath your scope rings. However, fit depends on your specific rifle and ring height, so verify clearance before mounting.
You'll need a wrench (included) and blue threadlocker (sold separately). Install with 20 inch-lbs of torque and a small amount of threadlocker on the base screws. All mounting hardware is included.
EGW
The EGW Winchester XPR LA 1-piece Picatinny base with 20 MOA elevation is built for shooters who plan to stretch their shots past 500 yards. If you're running a Winchester XPR in .300 Win Mag or another long-action cartridge and want a solid, no-nonsense mounting solution for long-range hunting or tactical work, this one-piece base delivers the angle and rigidity you need without the complexity of stacked shims.
EGW machines these bases in-house and finishes them with tumble, sand blast, and Type II anodizing—the kind of process that builds durability into the metal rather than just coating it. The beveled edges on both sides are ambidextrous, so it doesn't matter how you mount it. The Picatinny cross slots run the full length of the rail, giving you freedom to position your rings exactly where they need to be. The center channel design keeps weight down and, in most setups, won't block your factory iron sights if you want to keep them as a backup.
Setup is straightforward: torque the base to 20 inch-lbs with a drop of blue threadlocker (sold separately), then zero at 200 yards. The 20 MOA angle is purpose-built for the 500–1000 yard range; if you're hunting closer distances, EGW also makes a 0 MOA version. Every component—base, hardware, wrench, and packaging—is USA-made.
| Brand | EGW |
| Rifle Compatibility | Winchester XPR LA (Long Action) |
| Rail Type | Picatinny |
| Base Style | One-piece |
| Elevation Angle | 20 MOA |
| Finish | Type II Anodized |
| Mounting Torque | 20 inch-lbs |
| Recommended Zero Distance (20 MOA) | 200 yards |
| Manufacturing | USA |
This base is designed for the Winchester XPR in Long Action. EGW recommends verifying that your receiver's hole spacing matches their published dimensions before ordering. If you're unsure, measure the distance between your action's mounting holes and compare to EGW's specs.
EGW recommends zeroing at 200 yards when using the 20 MOA base. This angle is optimized for shooting between 500 and 1000 yards; if you're hunting or shooting in closer ranges, their 0 MOA version may be more appropriate.
In most cases, no. The center channel design of this base reduces material where possible, which often allows factory iron sights to coexist underneath your scope rings. However, fit depends on your specific rifle and ring height, so verify clearance before mounting.
You'll need a wrench (included) and blue threadlocker (sold separately). Install with 20 inch-lbs of torque and a small amount of threadlocker on the base screws. All mounting hardware is included.
