Loading...
Loading...
Loading...
Loading...
EGW
The EGW Winchester 1300 scope base transforms your shotgun into a modern platform without permanent modifications. This one-piece Picatinny rail mounts directly to your Winchester 1300's factory receiver holes—no drilling, tapping, or gunsmithing required. If you're running a rifled barrel or slug gun and want the flexibility to dial in optics quickly, this aluminum base gives you a rock-solid foundation for fast eye relief adjustments and easy scope swaps in the field.
Built from 6061 T6 extruded aluminum and precisely machined to MIL-STD 1913 specs, the EGW base is both lightweight and rigid. The full-width cross-slots are gauged to ±.002" tolerance, ensuring your Picatinny or Weaver rings sit true and stay put. Whether you're hunting waterfowl with a cantilever-mounted red dot or running a low-power scope for close-range accuracy work, this mount delivers the versatility serious shotgunners expect.
Installation is straightforward: the base comes with socket head Torx screws and wrench. EGW specs 20 inch-lbs of torque and a small drop of blue Loctite to lock everything down. The milled center channel keeps weight minimal without sacrificing the rigidity you need for reliable, repeatable zero.
| Brand | EGW |
| Firearm | Winchester 1300 |
| Mount Type | One-piece Picatinny rail |
| Rail Standard | MIL-STD 1913 Picatinny |
| Material | 6061 T6 extruded aluminum |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Slot Tolerance | ±.002" |
| Fasteners | Socket head Torx screws |
| Recommended Torque | 20 inch-lbs with blue Loctite |
No. The base is drilled to fit the factory scope mount holes on the Winchester 1300 receiver, so installation requires no drilling or tapping. You simply bolt it on using the included Torx screws.
The EGW base accepts any standard Picatinny or Weaver scope rings, giving you flexibility in ring height, material, and ring design to match your optic and shooting style.
The mount comes with socket head Torx screws, a Torx wrench, and all hardware needed for installation. EGW recommends using 20 inch-lbs of torque and a small amount of blue Loctite when tightening the fasteners.
Yes. The one-piece rigid aluminum design and MIL-STD 1913 slot precision make it suitable for shotguns with rifled barrels and slug loads, provided your scope and rings are rated for shotgun recoil.
EGW
The EGW Winchester 1300 scope base transforms your shotgun into a modern platform without permanent modifications. This one-piece Picatinny rail mounts directly to your Winchester 1300's factory receiver holes—no drilling, tapping, or gunsmithing required. If you're running a rifled barrel or slug gun and want the flexibility to dial in optics quickly, this aluminum base gives you a rock-solid foundation for fast eye relief adjustments and easy scope swaps in the field.
Built from 6061 T6 extruded aluminum and precisely machined to MIL-STD 1913 specs, the EGW base is both lightweight and rigid. The full-width cross-slots are gauged to ±.002" tolerance, ensuring your Picatinny or Weaver rings sit true and stay put. Whether you're hunting waterfowl with a cantilever-mounted red dot or running a low-power scope for close-range accuracy work, this mount delivers the versatility serious shotgunners expect.
Installation is straightforward: the base comes with socket head Torx screws and wrench. EGW specs 20 inch-lbs of torque and a small drop of blue Loctite to lock everything down. The milled center channel keeps weight minimal without sacrificing the rigidity you need for reliable, repeatable zero.
| Brand | EGW |
| Firearm | Winchester 1300 |
| Mount Type | One-piece Picatinny rail |
| Rail Standard | MIL-STD 1913 Picatinny |
| Material | 6061 T6 extruded aluminum |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Slot Tolerance | ±.002" |
| Fasteners | Socket head Torx screws |
| Recommended Torque | 20 inch-lbs with blue Loctite |
No. The base is drilled to fit the factory scope mount holes on the Winchester 1300 receiver, so installation requires no drilling or tapping. You simply bolt it on using the included Torx screws.
The EGW base accepts any standard Picatinny or Weaver scope rings, giving you flexibility in ring height, material, and ring design to match your optic and shooting style.
The mount comes with socket head Torx screws, a Torx wrench, and all hardware needed for installation. EGW recommends using 20 inch-lbs of torque and a small amount of blue Loctite when tightening the fasteners.
Yes. The one-piece rigid aluminum design and MIL-STD 1913 slot precision make it suitable for shotguns with rifled barrels and slug loads, provided your scope and rings are rated for shotgun recoil.
