Loading...
Loading...
Loading...
Loading...
EGW
The EGW Sight Mount for Vortex Razor gives you a clean, reliable way to mount modern red-dot optics on your Smith & Wesson revolver. This mount replaces the factory rear sight and accepts Vortex Razor red-dot sights (as well as C-More RTS and STS models), letting you pair precision glass with proven wheelgun ergonomics. If you shoot a K, L, N, or X frame S&W and want to modernize your sight picture without permanent modifications, this is the straightforward solution.
Installation is accessible for anyone comfortable with basic gunsmithing. The mount uses a dovetail interface on your revolver's top strap and includes all necessary mounting hardware—you'll need a 5/64" allen wrench to install the provided screws. The process is simple: remove the rear sight, slide the EGW mount into place, tighten the set screw, attach your red-dot, and apply blue Loctite to the mounting screws at 15 in/lbs torque. Because it replaces rather than modifies, you can always remove it and reinstall the original sight.
One critical detail: your revolver must already be drilled and tapped to accept this mount. You can verify this by opening the cylinder and checking the rib underneath for through holes—if there are none, you'll need a qualified gunsmith to drill and tap the top strap to the standard S&W hole pattern before this mount will work. It's a worthwhile investment if you're committed to modernizing a quality revolver for duty or sport shooting.
The EGW Sight Mount works on S&W K, L, N, and X frame revolvers—but only if your gun is already drilled and tapped on the top strap. To check, open the cylinder and look at the rib underneath; you should see through holes. If your revolver lacks these holes, a gunsmith can drill and tap it to the standard S&W pattern, which will then allow the mount to be installed.
The mount is designed to accept the Vortex Razor, as well as C-More RTS and C-More STS red-dot sights. If you're considering a different optic, verify compatibility before purchase.
All mounting hardware is included. You will need a 5/64" allen wrench (not included) to install the screws. Blue Loctite is recommended for the mounting screws but is not supplied.
Yes. Because it replaces rather than permanently modifies your gun, you can remove the EGW mount and reinstall your factory rear sight at any time. This makes it a flexible upgrade for shooters who want to try red-dot optics without commitment.
EGW
The EGW Sight Mount for Vortex Razor gives you a clean, reliable way to mount modern red-dot optics on your Smith & Wesson revolver. This mount replaces the factory rear sight and accepts Vortex Razor red-dot sights (as well as C-More RTS and STS models), letting you pair precision glass with proven wheelgun ergonomics. If you shoot a K, L, N, or X frame S&W and want to modernize your sight picture without permanent modifications, this is the straightforward solution.
Installation is accessible for anyone comfortable with basic gunsmithing. The mount uses a dovetail interface on your revolver's top strap and includes all necessary mounting hardware—you'll need a 5/64" allen wrench to install the provided screws. The process is simple: remove the rear sight, slide the EGW mount into place, tighten the set screw, attach your red-dot, and apply blue Loctite to the mounting screws at 15 in/lbs torque. Because it replaces rather than modifies, you can always remove it and reinstall the original sight.
One critical detail: your revolver must already be drilled and tapped to accept this mount. You can verify this by opening the cylinder and checking the rib underneath for through holes—if there are none, you'll need a qualified gunsmith to drill and tap the top strap to the standard S&W hole pattern before this mount will work. It's a worthwhile investment if you're committed to modernizing a quality revolver for duty or sport shooting.
The EGW Sight Mount works on S&W K, L, N, and X frame revolvers—but only if your gun is already drilled and tapped on the top strap. To check, open the cylinder and look at the rib underneath; you should see through holes. If your revolver lacks these holes, a gunsmith can drill and tap it to the standard S&W pattern, which will then allow the mount to be installed.
The mount is designed to accept the Vortex Razor, as well as C-More RTS and C-More STS red-dot sights. If you're considering a different optic, verify compatibility before purchase.
All mounting hardware is included. You will need a 5/64" allen wrench (not included) to install the screws. Blue Loctite is recommended for the mounting screws but is not supplied.
Yes. Because it replaces rather than permanently modifies your gun, you can remove the EGW mount and reinstall your factory rear sight at any time. This makes it a flexible upgrade for shooters who want to try red-dot optics without commitment.
