Loading...
Loading...
Loading...
Loading...
EGW
The EGW Ruger 10/22 scope base is a one-piece Picatinny rail system built to upgrade your 10/22 with minimal fuss. If you've got a 10/22 that needs a modern optics setup—whether you're building a tack-driving .22 target rig, a small-game hunter, or just want to add a red dot or low-power scope to your favorite plinker—this base lets you mount a scope without any drilling or tapping of the receiver. It drops right onto the factory scope mount holes, meaning it's reversible and won't leave permanent marks on your gun.
Precision-machined from 6061 T6 aluminum, the base is engineered to standard MIL-STD 1913 Picatinny specifications (±.002") so you can swap scope rings and optics quickly and trust your zero to hold. The full-width cross-slots accept both Picatinny and Weaver rings, giving you real flexibility in how you want to mount your optic. EGW's milled center channel design keeps weight down without sacrificing rigidity—important on a gun as fun and portable as the 10/22. The package includes socket head Torx screws, a wrench for installation, and EGW's straightforward guidance: 20 inch-lbs of torque plus a drop of blue loctite on the fasteners.
This is a no-frills, no-nonsense base for shooters who want a clean, modular setup. Whether you're threading it together for the first time or swapping a new scope on an old favorite, the 0 MOA configuration gives you a solid platform for mounting your rings and optic of choice.
| Manufacturer | EGW |
| Compatibility | Ruger 10/22 |
| Rail Type | Picatinny (MIL-STD 1913) |
| Material | 6061 T6 aluminum |
| Ring Compatibility | Picatinny and Weaver scope rings |
| MOA | 0 |
| Includes | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-lbs |
Yes. The EGW base mounts directly to your 10/22's factory scope mount holes with no drilling or tapping required.
The base accepts both Picatinny and Weaver scope rings, so you have flexibility in ring choice and can swap them as needed.
The base comes with socket head Torx screws, a wrench for installation, and EGW's recommendation to use 20 inch-lbs of torque and a drip of blue loctite when fastening it to your rifle.
No. Since it uses the factory scope mount holes and isn't permanently attached, you can remove it if needed without leaving marks on the receiver.
EGW
The EGW Ruger 10/22 scope base is a one-piece Picatinny rail system built to upgrade your 10/22 with minimal fuss. If you've got a 10/22 that needs a modern optics setup—whether you're building a tack-driving .22 target rig, a small-game hunter, or just want to add a red dot or low-power scope to your favorite plinker—this base lets you mount a scope without any drilling or tapping of the receiver. It drops right onto the factory scope mount holes, meaning it's reversible and won't leave permanent marks on your gun.
Precision-machined from 6061 T6 aluminum, the base is engineered to standard MIL-STD 1913 Picatinny specifications (±.002") so you can swap scope rings and optics quickly and trust your zero to hold. The full-width cross-slots accept both Picatinny and Weaver rings, giving you real flexibility in how you want to mount your optic. EGW's milled center channel design keeps weight down without sacrificing rigidity—important on a gun as fun and portable as the 10/22. The package includes socket head Torx screws, a wrench for installation, and EGW's straightforward guidance: 20 inch-lbs of torque plus a drop of blue loctite on the fasteners.
This is a no-frills, no-nonsense base for shooters who want a clean, modular setup. Whether you're threading it together for the first time or swapping a new scope on an old favorite, the 0 MOA configuration gives you a solid platform for mounting your rings and optic of choice.
| Manufacturer | EGW |
| Compatibility | Ruger 10/22 |
| Rail Type | Picatinny (MIL-STD 1913) |
| Material | 6061 T6 aluminum |
| Ring Compatibility | Picatinny and Weaver scope rings |
| MOA | 0 |
| Includes | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-lbs |
Yes. The EGW base mounts directly to your 10/22's factory scope mount holes with no drilling or tapping required.
The base accepts both Picatinny and Weaver scope rings, so you have flexibility in ring choice and can swap them as needed.
The base comes with socket head Torx screws, a wrench for installation, and EGW's recommendation to use 20 inch-lbs of torque and a drip of blue loctite when fastening it to your rifle.
No. Since it uses the factory scope mount holes and isn't permanently attached, you can remove it if needed without leaving marks on the receiver.
