Loading...
Loading...
Loading...
Loading...
EGW
The EGW Rem 700, 722, 40X Short Action scope base is a solid, no-nonsense one-piece solution for mounting optics on Remington short-action receivers without any gunsmithing. This is the kind of mount that gets out of your way and stays put—machined from ultra-rigid 7075 T6 aluminum with Picatinny slots gauged to military spec (MIL-STD 1913, +/−.002"), so your scope rings clamp tight and stay there. Built for hunters and shooters running Rem 700s, 722s, and 40X platforms who want a reliable, minimalist mounting system that doesn't require drilling or tapping into the receiver.
What sets the EGW heavy-duty base apart is its engineering: it drops your optic .100" lower than the lightweight variant, which keeps your scope closer to the barrel centerline and helps tighten your sight picture. The Picatinny rail accepts any standard Weaver or Picatinny rings, giving you flexibility in scope choice and eye relief adjustment without having to swap bases. The mounting holes line up directly with the factory scope mount holes on your receiver, so installation is straightforward for anyone comfortable with basic gunsmithing or a good armorer.
EGW includes socket head Torx screws and a wrench in the box, and they recommend 20 inch-lbs of torque with a drop of blue Loctite to lock everything in place. This is a no-frills, purpose-built mount for shooters who prioritize repeatability and durability over cosmetics.
| Manufacturer | EGW (EGW Precision) |
| Fit | Remington 700, 722, 40X Short Action |
| Mount Type | One-piece Picatinny rail base |
| Material | 7075 T6 extruded aluminum |
| Rail Standard | MIL-STD 1913 Picatinny (±.002\") |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Height Profile | Heavy-duty (0 MOA) |
| Included Hardware | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-lbs with blue Loctite |
Yes, the EGW base is drilled and designed to fit Remington 700, 722, and 40X short-action receivers using the factory scope mount hole pattern. No drilling or tapping is required.
Any scope rings built for Picatinny or Weaver rails will work with this base. This gives you broad options for ring height, material, and brand.
The heavy-duty version (this model) sits .100" lower than the lightweight base, positioning your scope closer to the barrel centerline for a better sight picture and improved accuracy.
The base comes with socket head Torx screws and a wrench. EGW recommends applying blue Loctite (not included) and torquing fasteners to 20 inch-lbs during installation.
EGW
The EGW Rem 700, 722, 40X Short Action scope base is a solid, no-nonsense one-piece solution for mounting optics on Remington short-action receivers without any gunsmithing. This is the kind of mount that gets out of your way and stays put—machined from ultra-rigid 7075 T6 aluminum with Picatinny slots gauged to military spec (MIL-STD 1913, +/−.002"), so your scope rings clamp tight and stay there. Built for hunters and shooters running Rem 700s, 722s, and 40X platforms who want a reliable, minimalist mounting system that doesn't require drilling or tapping into the receiver.
What sets the EGW heavy-duty base apart is its engineering: it drops your optic .100" lower than the lightweight variant, which keeps your scope closer to the barrel centerline and helps tighten your sight picture. The Picatinny rail accepts any standard Weaver or Picatinny rings, giving you flexibility in scope choice and eye relief adjustment without having to swap bases. The mounting holes line up directly with the factory scope mount holes on your receiver, so installation is straightforward for anyone comfortable with basic gunsmithing or a good armorer.
EGW includes socket head Torx screws and a wrench in the box, and they recommend 20 inch-lbs of torque with a drop of blue Loctite to lock everything in place. This is a no-frills, purpose-built mount for shooters who prioritize repeatability and durability over cosmetics.
| Manufacturer | EGW (EGW Precision) |
| Fit | Remington 700, 722, 40X Short Action |
| Mount Type | One-piece Picatinny rail base |
| Material | 7075 T6 extruded aluminum |
| Rail Standard | MIL-STD 1913 Picatinny (±.002\") |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Height Profile | Heavy-duty (0 MOA) |
| Included Hardware | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-lbs with blue Loctite |
Yes, the EGW base is drilled and designed to fit Remington 700, 722, and 40X short-action receivers using the factory scope mount hole pattern. No drilling or tapping is required.
Any scope rings built for Picatinny or Weaver rails will work with this base. This gives you broad options for ring height, material, and brand.
The heavy-duty version (this model) sits .100" lower than the lightweight base, positioning your scope closer to the barrel centerline for a better sight picture and improved accuracy.
The base comes with socket head Torx screws and a wrench. EGW recommends applying blue Loctite (not included) and torquing fasteners to 20 inch-lbs during installation.
