Loading...
Loading...
Loading...
Loading...
Dpms
The DPMS Firearms .308 Win 18 M-Lok B5 Bravo Rifle is a mid-length gas system AR platform built on forged 7075-T6 aluminum receivers with hardcoat anodized finishes—purpose-built for shooters who want a reliable, configurable .308 rifle without the bloat. This is a genuine shooter's platform: the 18-inch nitride-coated 4150 Chrome Moly Vanadium barrel (1 in 10 twist) pairs with a low-profile adjustable 3-position gas block so you can dial in performance whether you're running standard loads or pushing suppressors. The upper receiver is machined flat-top with feed ramps, forward assist, and dust cover—no shortcuts. The 15-inch free-float M-Lok rail gives you clean, predictable accuracy and plenty of real estate for mounting optics, lights, or other gear without rail twist interfering with your shot group.
What sets this DPMS apart is the attention to durability where it counts. The Toolcraft bolt carrier group uses 9310 steel with extra-power extractor springs, and the gas key is properly staked with grade 8 fasteners. The gas tube itself is nitrided for heat and corrosion resistance—a detail you don't see cut on budget rifles. The charging handle is forged 7075-T6 aluminum, and the whole upper/lower assembly is anodized to MIL-8625 Type 3 specs, so this rifle will hold up to serious field use.
The lower receiver comes ready to shoot: B5 Systems Bravo adjustable stock, Panther Polished Trigger, and a custom overmolded grip for comfortable, repeatable control. The 6-position telescoping stock lets you dial in length of pull for your body and shooting position. One 20-round Magpul PMAG is included, so you can get to the range immediately. This is a straightforward, no-nonsense .308 rifle for hunters, long-range shooters, and anyone serious about precision rifle performance without marketing noise.
| Caliber | .308 Winchester |
| Barrel Length | 18 inches |
| Barrel Material | 4150 Chrome Moly Vanadium Steel, nitride coated |
| Barrel Profile | A2 Style |
| Twist Rate | 1 in 10 |
| Gas System | Mid-length |
| Gas Block | Low-profile 3-position click switch adjustable |
| Gas Tube | Nitrided |
| Upper Receiver | Forged 7075-T6 aluminum, hardcoat anodized |
| Receiver Style | PA10 flat-top with feed ramps |
| Handguard | DPMS 15-inch M-Lok free-float rail |
| Forward Assist | Yes |
| Dust Cover | Yes |
| Bolt Carrier Group | Toolcraft PA10 with 9310 steel, extra-power extractor spring |
| Gas Key | Nitrided, properly staked with grade 8 fasteners |
| Charging Handle | 7075-T6 aluminum |
| Lower Receiver | Forged 7075-T6 aluminum, hardcoat anodized |
| Trigger | Panther Polished Trigger (PPT) |
| Stock | B5 Systems Bravo, black, 6-position telescoping |
| Grip | Panther Custom Overmolded |
| Buffer Tube | 7075-T6 aluminum |
| Magazine Included | One 20-round Magpul PMAG |
The DPMS .308 features an 18-inch barrel with a 1 in 10 twist rate, paired with a mid-length gas system and low-profile adjustable 3-position gas block. This setup balances velocity, handling, and modularity.
Yes, one 20-round Magpul PMAG is included with the rifle, so you can shoot right out of the box. The rifle ships complete and ready to function.
The handguard is a 15-inch DPMS free-float M-Lok rail with anti-slip and anti-rotation features. M-Lok slots accept a wide range of aftermarket mounting accessories, and the flat-top receiver design allows direct mounting of optics using standard Picatinny rings or mounts.
Yes, the rifle features a low-profile 3-position click switch adjustable gas block, which allows you to tune the gas system to your specific loads and whether you're running a suppressor. This gives you flexibility to optimize performance for various ammunition and configurations.
Dpms
The DPMS Firearms .308 Win 18 M-Lok B5 Bravo Rifle is a mid-length gas system AR platform built on forged 7075-T6 aluminum receivers with hardcoat anodized finishes—purpose-built for shooters who want a reliable, configurable .308 rifle without the bloat. This is a genuine shooter's platform: the 18-inch nitride-coated 4150 Chrome Moly Vanadium barrel (1 in 10 twist) pairs with a low-profile adjustable 3-position gas block so you can dial in performance whether you're running standard loads or pushing suppressors. The upper receiver is machined flat-top with feed ramps, forward assist, and dust cover—no shortcuts. The 15-inch free-float M-Lok rail gives you clean, predictable accuracy and plenty of real estate for mounting optics, lights, or other gear without rail twist interfering with your shot group.
What sets this DPMS apart is the attention to durability where it counts. The Toolcraft bolt carrier group uses 9310 steel with extra-power extractor springs, and the gas key is properly staked with grade 8 fasteners. The gas tube itself is nitrided for heat and corrosion resistance—a detail you don't see cut on budget rifles. The charging handle is forged 7075-T6 aluminum, and the whole upper/lower assembly is anodized to MIL-8625 Type 3 specs, so this rifle will hold up to serious field use.
The lower receiver comes ready to shoot: B5 Systems Bravo adjustable stock, Panther Polished Trigger, and a custom overmolded grip for comfortable, repeatable control. The 6-position telescoping stock lets you dial in length of pull for your body and shooting position. One 20-round Magpul PMAG is included, so you can get to the range immediately. This is a straightforward, no-nonsense .308 rifle for hunters, long-range shooters, and anyone serious about precision rifle performance without marketing noise.
| Caliber | .308 Winchester |
| Barrel Length | 18 inches |
| Barrel Material | 4150 Chrome Moly Vanadium Steel, nitride coated |
| Barrel Profile | A2 Style |
| Twist Rate | 1 in 10 |
| Gas System | Mid-length |
| Gas Block | Low-profile 3-position click switch adjustable |
| Gas Tube | Nitrided |
| Upper Receiver | Forged 7075-T6 aluminum, hardcoat anodized |
| Receiver Style | PA10 flat-top with feed ramps |
| Handguard | DPMS 15-inch M-Lok free-float rail |
| Forward Assist | Yes |
| Dust Cover | Yes |
| Bolt Carrier Group | Toolcraft PA10 with 9310 steel, extra-power extractor spring |
| Gas Key | Nitrided, properly staked with grade 8 fasteners |
| Charging Handle | 7075-T6 aluminum |
| Lower Receiver | Forged 7075-T6 aluminum, hardcoat anodized |
| Trigger | Panther Polished Trigger (PPT) |
| Stock | B5 Systems Bravo, black, 6-position telescoping |
| Grip | Panther Custom Overmolded |
| Buffer Tube | 7075-T6 aluminum |
| Magazine Included | One 20-round Magpul PMAG |
The DPMS .308 features an 18-inch barrel with a 1 in 10 twist rate, paired with a mid-length gas system and low-profile adjustable 3-position gas block. This setup balances velocity, handling, and modularity.
Yes, one 20-round Magpul PMAG is included with the rifle, so you can shoot right out of the box. The rifle ships complete and ready to function.
The handguard is a 15-inch DPMS free-float M-Lok rail with anti-slip and anti-rotation features. M-Lok slots accept a wide range of aftermarket mounting accessories, and the flat-top receiver design allows direct mounting of optics using standard Picatinny rings or mounts.
Yes, the rifle features a low-profile 3-position click switch adjustable gas block, which allows you to tune the gas system to your specific loads and whether you're running a suppressor. This gives you flexibility to optimize performance for various ammunition and configurations.
