The DNZ Products Game Reaper 1-piece scope base with 30mm integral rings is purpose-built for Browning BAR rifles and compatible long-action BLR models, delivering a solid mounting solution without the complexity of two-piece systems. Machined from billet 6061-T6 aluminum and made in the USA, this mount eliminates moving parts between your receiver and optic, creating a rigid, shock-absorbing platform that handles recoil and temperature swings better than steel at roughly one-third the weight. If you're running a BAR or long-action BLR and want a no-nonsense scope mount that won't shift zero, this is engineered for that job.

The integral 30mm rings come factory-aligned to your rifle's receiver, so there's no guesswork in ring spacing or cant. DNZ's design uses precision socket-head cap screws and four times the threaded engagement of comparable one-piece mounts, translating to strength that lasts through seasons of hunting and range work. Both the base and rings thread with 7/64" Allen wrenches—standard sizes (6-48 for base, 6-40 for rings) you can source anywhere if you ever need a replacement screw. The mount accepts both left and right-hand rifles and also fits Benelli R1 short-action rifles, adding flexibility if your gun room grows.

Height options span low (.94"), medium (1.06"), and high (1.19") above the receiver centerline, letting you dial in eye relief and cheek weld comfort for your scope and stock combination. The 4.24" outside-to-outside ring spacing and .63" ring width accommodate standard 30mm tubes. Installation is straightforward: four holes with .50", 3.19", and .50" spacing leave room for most gas tube and action designs. This is the kind of mount that disappears once it's tight—no rattles, no surprises, just a BAR that holds its aim.

Key Features

• Machined from solid billet 6061-T6 aluminum for durability and light weight
• One-piece design with integral 30mm rings eliminates separate ring alignment
• Precision socket-head cap screws and four times the threaded engagement for security
• Available in three heights: low (.94"), medium (1.06"), and high (1.19")
• Made in the USA
• Fits both left and right-hand Browning BAR, long-action BLR, and Benelli R1 rifles
• Approximately 67% lighter than comparable steel one-piece mounts

Specifications

Frequently Asked Questions

Will this mount fit my Browning BAR and BLR?

Yes. The Game Reaper base is designed for all Browning BAR actions and long-action BLR rifles. It also fits Benelli R1 short-action rifles. The same mount works on both left and right-hand rifles, so orientation isn't a concern.

What scope tube diameter does it accept?

The integral rings are machined for 30mm scope tubes. Ring width is .63" and outside-to-outside spacing is 4.24", suitable for standard 30mm optics.

Which height option should I choose?

That depends on your scope and stock geometry. Low (.94") works for most hunting rifles with standard combs; medium (1.06") adds clearance for higher-mounted scopes or cheek-rest stocks; high (1.19") accommodates taller optics or non-standard setups. Measure your scope diameter and check your rifle's receiver profile before ordering.

How do I install it?

The base mounts with four screws spaced at .50", 3.19", and .50". Both base screws (6-48) and ring screws (6-40) require a 7/64" Allen wrench. No special tools or alignment jigs are needed; the integral rings come pre-aligned to your receiver.