DNZ Game Reaper 30mm Scopemount - Black, Medium Height for Remington 700 Short ActionDNZPrice from $58.95 to $74.95.
Loading...
Loading...
Loading...
Loading...
DNZ
The DNZ Game Reaper 30mm scopemount is a precision-engineered one-piece mount designed specifically for the Remington 700 long action and compatible firearms. Built from a solid block of 6061-T6 billet aluminum and precision-machined for perfect receiver alignment, this medium-height, 20 MOA tactical mount gives you a rock-solid platform for long-range hunting and precision rifle builds. The 20 MOA taper—about .03" lower on the front ring than a standard level mount—is cut into the mount itself, so you're ready to dial for distance without sacrificing velocity or ballistic efficiency.
What sets the Game Reaper apart is its engineering philosophy: no moving parts between rifle and scope means zero tolerance stack-up and zero shift under recoil. You get four times the screw threads of comparable one-piece designs, coupled with socket-head cap screws and a robust ring structure that handles the shock and temperature swings of serious field work. At 67% lighter than steel alternatives, it won't bog down your rig, yet the strength is unmistakable. Made in the USA, this mount handles both the mechanical precision required for long-range work and the durability needed for backcountry hunts.
The medium height places your scope centerline 0.98" above the receiver, a proven sweet spot for most modern optics and cheek-weld comfort on tactical rifles. DNZ mounts are custom-machined to fit Remington 700, 721, 722, and Bergara B14 actions with identical precision. Available in right-hand and left-hand configurations to match your firearm.
| Product Type | One-Piece Scope Mount |
| Objective Diameter | 30mm |
| MOA Taper | 20 MOA |
| Height | Medium (0.98" centerline above receiver) |
| Finish | Black |
| Material | 6061-T6 Billet Aluminum |
| Ring Configuration | Tactical (.80" wide, 4 screws per ring) |
| Outside-to-Outside Ring Spacing | 4.62" |
| Hole-to-Hole Spacing | 0.86", 4.48", 0.60" |
| Base Screws | 6-48 × 1/4" (7/64" Allen wrench) |
| Ring Screws | 6-40 × 5/8" (7/64" Allen wrench) |
| Compatibility | Remington 700 Long Action, Remington 721, Remington 722, Bergara B14 |
| Options | Right-hand and left-hand |
| Made In | USA |
Yes—this mount is custom-machined for the Remington 700 long action, as well as the Remington 721 and 722, and the Bergara B14. Be sure you select the right-hand or left-hand version to match your rifle. Height options include low (0.63"), medium (0.98"), and high (1.23"); this listing is for the medium height.
The 20 MOA taper is built into the mount itself and angles downward toward the front by about 0.03" relative to a level mount. This gives you extra elevation travel at distance without adding weight or complexity, making it ideal for long-range hunting and precision shooting where you need to dial for range on flatter ballistics.
This is a one-piece mount. The entire base and ring assembly is machined from a single billet, which eliminates moving parts and tolerance stack-up between the firearm and scope. The rings are held in place by socket-head cap screws with four attachment points per ring on the tactical model.
This is a 30mm scopemount, designed to accommodate 30mm objective bell optics.
DNZ
The DNZ Game Reaper 30mm scopemount is a precision-engineered one-piece mount designed specifically for the Remington 700 long action and compatible firearms. Built from a solid block of 6061-T6 billet aluminum and precision-machined for perfect receiver alignment, this medium-height, 20 MOA tactical mount gives you a rock-solid platform for long-range hunting and precision rifle builds. The 20 MOA taper—about .03" lower on the front ring than a standard level mount—is cut into the mount itself, so you're ready to dial for distance without sacrificing velocity or ballistic efficiency.
What sets the Game Reaper apart is its engineering philosophy: no moving parts between rifle and scope means zero tolerance stack-up and zero shift under recoil. You get four times the screw threads of comparable one-piece designs, coupled with socket-head cap screws and a robust ring structure that handles the shock and temperature swings of serious field work. At 67% lighter than steel alternatives, it won't bog down your rig, yet the strength is unmistakable. Made in the USA, this mount handles both the mechanical precision required for long-range work and the durability needed for backcountry hunts.
The medium height places your scope centerline 0.98" above the receiver, a proven sweet spot for most modern optics and cheek-weld comfort on tactical rifles. DNZ mounts are custom-machined to fit Remington 700, 721, 722, and Bergara B14 actions with identical precision. Available in right-hand and left-hand configurations to match your firearm.
| Product Type | One-Piece Scope Mount |
| Objective Diameter | 30mm |
| MOA Taper | 20 MOA |
| Height | Medium (0.98" centerline above receiver) |
| Finish | Black |
| Material | 6061-T6 Billet Aluminum |
| Ring Configuration | Tactical (.80" wide, 4 screws per ring) |
| Outside-to-Outside Ring Spacing | 4.62" |
| Hole-to-Hole Spacing | 0.86", 4.48", 0.60" |
| Base Screws | 6-48 × 1/4" (7/64" Allen wrench) |
| Ring Screws | 6-40 × 5/8" (7/64" Allen wrench) |
| Compatibility | Remington 700 Long Action, Remington 721, Remington 722, Bergara B14 |
| Options | Right-hand and left-hand |
| Made In | USA |
Yes—this mount is custom-machined for the Remington 700 long action, as well as the Remington 721 and 722, and the Bergara B14. Be sure you select the right-hand or left-hand version to match your rifle. Height options include low (0.63"), medium (0.98"), and high (1.23"); this listing is for the medium height.
The 20 MOA taper is built into the mount itself and angles downward toward the front by about 0.03" relative to a level mount. This gives you extra elevation travel at distance without adding weight or complexity, making it ideal for long-range hunting and precision shooting where you need to dial for range on flatter ballistics.
This is a one-piece mount. The entire base and ring assembly is machined from a single billet, which eliminates moving parts and tolerance stack-up between the firearm and scope. The rings are held in place by socket-head cap screws with four attachment points per ring on the tactical model.
This is a 30mm scopemount, designed to accommodate 30mm objective bell optics.
