Loading...
Loading...
Loading...
Loading...
Dead Air
The Dead Air Armament DA307 KeyMo flash hider is a precision-engineered muzzle device built specifically for FAL rifles and other firearms with 9/16x24 left-hand threads. This flash hider integrates seamlessly with Dead Air's KeyMo suppressor mounting system, letting you run a Sandman Series suppressor or other KeyMo-compatible can on your rifle while maintaining the freedom to remove and remount without worrying about carbon lock-up—a real advantage when you're cycling equipment between firearms or need fast suppressor changes in the field.
Dead Air engineered this flash hider with a distinctive design: equal-length tines positioned to shift mass in a way that eliminates the characteristic "ping" common to conventional flash hiders. That matters if you're hunting or shooting in noise-sensitive environments where audible feedback from the muzzle device itself can give away your position. The construction is 4140 heat-treated alloy steel with a durable black nitride finish, built to withstand the rigors of repeated mounting cycles and hard use.
This particular model comes drilled and ready for pin-and-weld installation if your local regulations or rifle setup require a permanently fixed muzzle device. Whether you're suppressing a semi-auto FAL for tactical training, hunting, or range work, the DA307 gives you a rock-solid KeyMo platform that won't let you down.
| Brand | Dead Air Armament |
| Model | DA307 |
| Thread Pattern | 9/16x24 Left-Hand |
| Bore Diameter | .30 caliber |
| Length | 2.70 inches |
| Weight | 4.08 oz |
| Material | 4140 HT Alloy Steel |
| Finish | Black Nitride |
| Mounting System | KeyMo |
Yes. The DA307 is designed to work with Dead Air's KeyMo mounting system, including the Sandman Series suppressors and other KeyMo-equipped cans. The KeyMo interface allows quick attachment and removal without carbon-locking issues.
The 9/16x24 left-hand threads are designed for rifles that use this specific pattern, such as FAL platforms. Always verify your rifle's thread pitch and direction before purchase to ensure proper fit.
Yes. The DA307 comes with a pre-drilled pin-and-weld hole at the 6 o'clock position, making it ready for permanent installation if required or desired.
Dead Air's equal-length tine design with mass shifted proportionally reduces the vibration and audible feedback that traditional flash hiders produce, resulting in a notably quieter muzzle device.
Dead Air
The Dead Air Armament DA307 KeyMo flash hider is a precision-engineered muzzle device built specifically for FAL rifles and other firearms with 9/16x24 left-hand threads. This flash hider integrates seamlessly with Dead Air's KeyMo suppressor mounting system, letting you run a Sandman Series suppressor or other KeyMo-compatible can on your rifle while maintaining the freedom to remove and remount without worrying about carbon lock-up—a real advantage when you're cycling equipment between firearms or need fast suppressor changes in the field.
Dead Air engineered this flash hider with a distinctive design: equal-length tines positioned to shift mass in a way that eliminates the characteristic "ping" common to conventional flash hiders. That matters if you're hunting or shooting in noise-sensitive environments where audible feedback from the muzzle device itself can give away your position. The construction is 4140 heat-treated alloy steel with a durable black nitride finish, built to withstand the rigors of repeated mounting cycles and hard use.
This particular model comes drilled and ready for pin-and-weld installation if your local regulations or rifle setup require a permanently fixed muzzle device. Whether you're suppressing a semi-auto FAL for tactical training, hunting, or range work, the DA307 gives you a rock-solid KeyMo platform that won't let you down.
| Brand | Dead Air Armament |
| Model | DA307 |
| Thread Pattern | 9/16x24 Left-Hand |
| Bore Diameter | .30 caliber |
| Length | 2.70 inches |
| Weight | 4.08 oz |
| Material | 4140 HT Alloy Steel |
| Finish | Black Nitride |
| Mounting System | KeyMo |
Yes. The DA307 is designed to work with Dead Air's KeyMo mounting system, including the Sandman Series suppressors and other KeyMo-equipped cans. The KeyMo interface allows quick attachment and removal without carbon-locking issues.
The 9/16x24 left-hand threads are designed for rifles that use this specific pattern, such as FAL platforms. Always verify your rifle's thread pitch and direction before purchase to ensure proper fit.
Yes. The DA307 comes with a pre-drilled pin-and-weld hole at the 6 o'clock position, making it ready for permanent installation if required or desired.
Dead Air's equal-length tine design with mass shifted proportionally reduces the vibration and audible feedback that traditional flash hiders produce, resulting in a notably quieter muzzle device.
