Loading...
Loading...
Loading...
Loading...
Dickinson Arms
The Dickinson Arms NOMAD LTi XC 7.62 silencer with XENO is a lightweight titanium suppressor built for hunters and precision shooters who refuse to compromise on weight savings. At just 12.6 ounces, this fully-welded Grade 5 titanium can is engineered to stay out of your way until you need the sound reduction—ideal for bolt-action and semi-auto rifles where every ounce matters on a long stalk or from a blind. The XENO mounting system delivers rock-solid repeatability and a return to zero that precision-minded shooters demand, while the black Cerakote finish gives you clean aesthetics that work across any rifle platform.
Suppression performance comes from a sophisticated two-chamber wedge baffle design that bleeds pressure efficiently while keeping first-round pop to a minimum. The Nomad LTi handles everything from standard calibers through .300 Norma Mag (up to 4400 ft-lbs of energy), making it versatile enough for most hunting rifles without forcing you to optimize for one extreme or the other. Its 8.4-inch length and 1.735-inch diameter give you a compact profile that doesn't feel bolted to your rifle, which matters when you're carrying through rough country or fitting it into tight hunting situations.
The modular R-Series design means you can swap front caps and accessories to fine-tune your setup. The included XENO adapter sits higher in the mounting stack, minimizing deep contact with the blast chamber and reducing focused erosion on the baffles—a smart engineering choice that extends suppressor life. Just remember: titanium loses strength above 800°F, so keep rapid-fire sessions to 1–2 magazines with a minute of cooldown per mag. That's a real-world constraint worth respecting to keep your can running strong season after season.
| Caliber Rating | Up to .300 Norma Mag |
| Energy Rating | 4400 ft-lbs |
| Bore Diameter | .30 caliber |
| Length | 8.4 inches |
| Diameter | 1.735 inches |
| Weight | 12.6 ounces |
| Material | Fully welded titanium 6AI-4V |
| Finish | Black Cerakote |
| Mount Type | XENO adapter (direct thread 5/8-24 included) |
| Suitable For | Bolt-action and semi-auto rifles |
| Full Auto Rated | No |
The suppressor ships with a 5/8-24 direct thread mount and includes the XENO adapter. It's also compatible with Dickinson Arms R-Series front caps and HUB Adapters, so you can swap between direct thread, XENO, or KeyMo depending on your host rifle and preferences.
Yes. The NOMAD LTi is rated for cartridges up to .300 Norma Mag with an energy rating of 4400 ft-lbs, making it suitable for most magnum hunting rifles. Just observe the heat management guidelines—limit rapid-fire sessions to 1–2 magazines with a one-minute cooldown between sequences to keep titanium operating temperatures under control.
The XENO adapter provides repeatability and a reliable return to zero, which is critical for precision shooting. Its design sits higher in the mounting stack, which also minimizes erosion on the baffle system by reducing deep contact with the blast chamber.
A 12.5-inch barrel is the minimum restriction for this suppressor.
Dickinson Arms
The Dickinson Arms NOMAD LTi XC 7.62 silencer with XENO is a lightweight titanium suppressor built for hunters and precision shooters who refuse to compromise on weight savings. At just 12.6 ounces, this fully-welded Grade 5 titanium can is engineered to stay out of your way until you need the sound reduction—ideal for bolt-action and semi-auto rifles where every ounce matters on a long stalk or from a blind. The XENO mounting system delivers rock-solid repeatability and a return to zero that precision-minded shooters demand, while the black Cerakote finish gives you clean aesthetics that work across any rifle platform.
Suppression performance comes from a sophisticated two-chamber wedge baffle design that bleeds pressure efficiently while keeping first-round pop to a minimum. The Nomad LTi handles everything from standard calibers through .300 Norma Mag (up to 4400 ft-lbs of energy), making it versatile enough for most hunting rifles without forcing you to optimize for one extreme or the other. Its 8.4-inch length and 1.735-inch diameter give you a compact profile that doesn't feel bolted to your rifle, which matters when you're carrying through rough country or fitting it into tight hunting situations.
The modular R-Series design means you can swap front caps and accessories to fine-tune your setup. The included XENO adapter sits higher in the mounting stack, minimizing deep contact with the blast chamber and reducing focused erosion on the baffles—a smart engineering choice that extends suppressor life. Just remember: titanium loses strength above 800°F, so keep rapid-fire sessions to 1–2 magazines with a minute of cooldown per mag. That's a real-world constraint worth respecting to keep your can running strong season after season.
| Caliber Rating | Up to .300 Norma Mag |
| Energy Rating | 4400 ft-lbs |
| Bore Diameter | .30 caliber |
| Length | 8.4 inches |
| Diameter | 1.735 inches |
| Weight | 12.6 ounces |
| Material | Fully welded titanium 6AI-4V |
| Finish | Black Cerakote |
| Mount Type | XENO adapter (direct thread 5/8-24 included) |
| Suitable For | Bolt-action and semi-auto rifles |
| Full Auto Rated | No |
The suppressor ships with a 5/8-24 direct thread mount and includes the XENO adapter. It's also compatible with Dickinson Arms R-Series front caps and HUB Adapters, so you can swap between direct thread, XENO, or KeyMo depending on your host rifle and preferences.
Yes. The NOMAD LTi is rated for cartridges up to .300 Norma Mag with an energy rating of 4400 ft-lbs, making it suitable for most magnum hunting rifles. Just observe the heat management guidelines—limit rapid-fire sessions to 1–2 magazines with a one-minute cooldown between sequences to keep titanium operating temperatures under control.
The XENO adapter provides repeatability and a reliable return to zero, which is critical for precision shooting. Its design sits higher in the mounting stack, which also minimizes erosion on the baffle system by reducing deep contact with the blast chamber.
A 12.5-inch barrel is the minimum restriction for this suppressor.
