Crimson Trace Lasergrips for Smith & Wesson J-Frame Round Butt Polymer HandgunCrimson Trace$186.95
Loading...
Loading...
Loading...
Loading...
Crimson Trace
The Crimson Trace Lasergrips for Smith & Wesson J-Frame Round Butt revolvers put a fast, reliable aiming reference right where your fingers already are. These laser grips replace your factory stocks with a polymer and rubber-overmolded grip that houses a 5mW green laser—no rail mount, no add-on hardware, just grab and shoot. J-Frame owners who carry snubbies for backup, home defense, or deep concealment often face low-light encounters where conventional sights vanish. A green laser dot cuts through that problem and lets you shoot from retention positions, around obstacles, or at angles a conventional sight picture won't reach.
Installation is a user job—no gunsmith required. Swap your grips, adjust windage and elevation to dial in the laser at 50 feet, and you're done. The front-mounted activation button sits under your trigger finger, so you can cant the revolver slightly forward and press to activate without changing your grip. Battery life runs over two hours per set of four #2016 lithium cells, and Crimson Trace ships the first set free and will keep you stocked for life. A master on/off switch lets you toggle the laser without fumbling, and the green dot clusters to roughly 0.5 inches at 50 feet, tight enough for precision work yet bright enough to track in daylight.
These grips improve handling comfort too. The recoil reduction design absorbs some of the J-Frame's snappy recoil impulse, which matters during practice or high-stress deployment. Round-butt J-Frames fit hands differently than square-butt variants, and these grips are shaped specifically for that geometry, so you get ergonomics tailored to your revolver's profile. The black polymer finish is durable and won't snag on holster edges or carry cloth.
| Firearm Fit | Smith & Wesson J-Frame Round Butt |
| Laser Type | Green laser, 5mW |
| Laser Dot Size | Approximately 0.5 inch diameter at 50 feet |
| Sighting Distance | Factory sighted at 50 feet |
| Battery Type | Four #2016 lithium batteries |
| Battery Life | Over two hours |
| Activation | Pressure activated; front-mounted button |
| Master Switch | Yes |
| Adjustment | User-adjustable windage and elevation |
| Installation | User installed (grip replacement) |
| Material | Polymer and rubber overmold |
| Finish | Black |
| Warranty | Three-year full warranty |
These Lasergrips are specifically designed for S&W J-Frame revolvers with round-butt frames. If your J-Frame has a round butt (versus the wider square-butt profile), these grips will fit. Always verify your revolver's frame style before ordering.
You can install these grips yourself in minutes. They replace your factory grip panels, and no special tools are required. Windage and elevation are user-adjustable, so you can dial in the laser dot at 50 feet without returning to a shop.
The laser runs on four #2016 lithium batteries and delivers over two hours of runtime per set. Crimson Trace includes the first set of batteries and offers free replacement batteries for life, so you don't have to source them separately.
The 5mW green laser has a dot approximately 0.5 inches in diameter at 50 feet. Green light is more visible to the human eye than red, especially in bright conditions, though laser dot visibility always improves in lower light. The laser is pre-sighted at 50 feet, so it delivers practical accuracy for defensive shooting distances.
Crimson Trace
The Crimson Trace Lasergrips for Smith & Wesson J-Frame Round Butt revolvers put a fast, reliable aiming reference right where your fingers already are. These laser grips replace your factory stocks with a polymer and rubber-overmolded grip that houses a 5mW green laser—no rail mount, no add-on hardware, just grab and shoot. J-Frame owners who carry snubbies for backup, home defense, or deep concealment often face low-light encounters where conventional sights vanish. A green laser dot cuts through that problem and lets you shoot from retention positions, around obstacles, or at angles a conventional sight picture won't reach.
Installation is a user job—no gunsmith required. Swap your grips, adjust windage and elevation to dial in the laser at 50 feet, and you're done. The front-mounted activation button sits under your trigger finger, so you can cant the revolver slightly forward and press to activate without changing your grip. Battery life runs over two hours per set of four #2016 lithium cells, and Crimson Trace ships the first set free and will keep you stocked for life. A master on/off switch lets you toggle the laser without fumbling, and the green dot clusters to roughly 0.5 inches at 50 feet, tight enough for precision work yet bright enough to track in daylight.
These grips improve handling comfort too. The recoil reduction design absorbs some of the J-Frame's snappy recoil impulse, which matters during practice or high-stress deployment. Round-butt J-Frames fit hands differently than square-butt variants, and these grips are shaped specifically for that geometry, so you get ergonomics tailored to your revolver's profile. The black polymer finish is durable and won't snag on holster edges or carry cloth.
| Firearm Fit | Smith & Wesson J-Frame Round Butt |
| Laser Type | Green laser, 5mW |
| Laser Dot Size | Approximately 0.5 inch diameter at 50 feet |
| Sighting Distance | Factory sighted at 50 feet |
| Battery Type | Four #2016 lithium batteries |
| Battery Life | Over two hours |
| Activation | Pressure activated; front-mounted button |
| Master Switch | Yes |
| Adjustment | User-adjustable windage and elevation |
| Installation | User installed (grip replacement) |
| Material | Polymer and rubber overmold |
| Finish | Black |
| Warranty | Three-year full warranty |
These Lasergrips are specifically designed for S&W J-Frame revolvers with round-butt frames. If your J-Frame has a round butt (versus the wider square-butt profile), these grips will fit. Always verify your revolver's frame style before ordering.
You can install these grips yourself in minutes. They replace your factory grip panels, and no special tools are required. Windage and elevation are user-adjustable, so you can dial in the laser dot at 50 feet without returning to a shop.
The laser runs on four #2016 lithium batteries and delivers over two hours of runtime per set. Crimson Trace includes the first set of batteries and offers free replacement batteries for life, so you don't have to source them separately.
The 5mW green laser has a dot approximately 0.5 inches in diameter at 50 feet. Green light is more visible to the human eye than red, especially in bright conditions, though laser dot visibility always improves in lower light. The laser is pre-sighted at 50 feet, so it delivers practical accuracy for defensive shooting distances.