Brownells Complete Slide Assembly With Threaded Barrel For Glock 17
Brownells Complete Slide Assembly With Threaded Barrel For Glock 17Brownells$243.24
Loading...
Loading...
Loading...
Loading...
Brownells
A Brownells Complete Slide Assembly With Barrel For Glock 17 gives you a fully machined, factory-spec upper ready to pair with a compatible frame—whether you're building a custom pistol from the ground up or upgrading your Gen3 Glock 17. Each slide ships fully assembled with your choice of barrel profile, front and rear sights, recoil spring, and all internal small parts already installed. That means no gunsmithing, no parts hunting, just screw it onto a frame and shoot.
The slide itself is machined from 416 stainless steel billet and finished in hard Black Nitride for durability and corrosion resistance. It's cut to factory Glock specs inside and fitted with a pre-cut RMR footprint slot so you can mount a reflex red dot without milling—a Brownells polymer cover plate fills the slot if you're not using an optic yet. Front and rear sights are standard height, working perfectly as backups behind an electronic sight or as your primary irons if you prefer to run them naked. Cocking serrations front and rear—wide, shallow, and mirrored—give you positive grip from any angle when you need to rack the slide or press-check.
Pick your barrel setup based on your mission. The standard solid-top slide pairs a match-quality barrel for general-purpose accuracy. Prefer a suppressed setup? The threaded version features ½"-28 tpi threads for direct mounting of most common suppressors. Want less muzzle flip without adding a muzzle device? The ported ported barrel vents through a window cut into the slide, managing rise and helping you stay on target for follow-up shots—and your finished pistol still holsters in any standard Glock 17 holster. All barrels are machined from premium 416R stainless steel.
This is a no-BS upgrade or build component: fully assembled, machined to spec, and ready to work the moment it hits your frame.
| Brand | Brownells |
| Product Type | Complete Slide Assembly with Barrel |
| Compatibility | Glock 17 Gen3 frames and compatible clones |
| Slide Material | 416 Stainless Steel (billet machined) |
| Slide Finish | Black Nitride |
| Barrel Material | 416R Stainless Steel |
| Optic Mount | Trijicon RMR footprint (pre-cut) |
| Threaded Barrel Option | ½"-28 tpi (where applicable) |
| Ported Barrel Option | 8-port compensator window configuration (where applicable) |
| Sights Included | Standard-height front and rear |
| Included Accessories | Recoil spring assembly, RMR slot cover plate |
Yes, if you have a Glock 17 Gen3 factory frame or a compatible aftermarket Gen3 frame. The slide is machined to factory Glock specifications and will work with any Gen3 Glock 17 or clone frame that accepts standard Gen3 uppers.
Brownells offers three configurations: a solid-top slide with a standard match-quality barrel, a solid-top slide with a ½"-28 tpi threaded barrel for suppressor mounting, and a distinctive window-top slide with a ported barrel that helps manage muzzle rise without requiring a muzzle device.
Yes. The slide is pre-cut with a mounting slot machined for Trijicon RMR footprint optics, allowing low-profile secure mounting. A reinforced polymer cover plate is included if you don't mount an optic immediately.
Everything. The slide ships fully assembled with the barrel, front and rear sights, recoil spring assembly, and all internal small parts already installed. You only need to attach it to a compatible frame to complete your pistol.
Installation itself is straightforward, but Brownells notes that a channel liner is required for these slides—it's a press fit and requires a tool to install. Brownells recommends part #777-100-017 for this job.
Brownells
A Brownells Complete Slide Assembly With Barrel For Glock 17 gives you a fully machined, factory-spec upper ready to pair with a compatible frame—whether you're building a custom pistol from the ground up or upgrading your Gen3 Glock 17. Each slide ships fully assembled with your choice of barrel profile, front and rear sights, recoil spring, and all internal small parts already installed. That means no gunsmithing, no parts hunting, just screw it onto a frame and shoot.
The slide itself is machined from 416 stainless steel billet and finished in hard Black Nitride for durability and corrosion resistance. It's cut to factory Glock specs inside and fitted with a pre-cut RMR footprint slot so you can mount a reflex red dot without milling—a Brownells polymer cover plate fills the slot if you're not using an optic yet. Front and rear sights are standard height, working perfectly as backups behind an electronic sight or as your primary irons if you prefer to run them naked. Cocking serrations front and rear—wide, shallow, and mirrored—give you positive grip from any angle when you need to rack the slide or press-check.
Pick your barrel setup based on your mission. The standard solid-top slide pairs a match-quality barrel for general-purpose accuracy. Prefer a suppressed setup? The threaded version features ½"-28 tpi threads for direct mounting of most common suppressors. Want less muzzle flip without adding a muzzle device? The ported ported barrel vents through a window cut into the slide, managing rise and helping you stay on target for follow-up shots—and your finished pistol still holsters in any standard Glock 17 holster. All barrels are machined from premium 416R stainless steel.
This is a no-BS upgrade or build component: fully assembled, machined to spec, and ready to work the moment it hits your frame.
| Brand | Brownells |
| Product Type | Complete Slide Assembly with Barrel |
| Compatibility | Glock 17 Gen3 frames and compatible clones |
| Slide Material | 416 Stainless Steel (billet machined) |
| Slide Finish | Black Nitride |
| Barrel Material | 416R Stainless Steel |
| Optic Mount | Trijicon RMR footprint (pre-cut) |
| Threaded Barrel Option | ½"-28 tpi (where applicable) |
| Ported Barrel Option | 8-port compensator window configuration (where applicable) |
| Sights Included | Standard-height front and rear |
| Included Accessories | Recoil spring assembly, RMR slot cover plate |
Yes, if you have a Glock 17 Gen3 factory frame or a compatible aftermarket Gen3 frame. The slide is machined to factory Glock specifications and will work with any Gen3 Glock 17 or clone frame that accepts standard Gen3 uppers.
Brownells offers three configurations: a solid-top slide with a standard match-quality barrel, a solid-top slide with a ½"-28 tpi threaded barrel for suppressor mounting, and a distinctive window-top slide with a ported barrel that helps manage muzzle rise without requiring a muzzle device.
Yes. The slide is pre-cut with a mounting slot machined for Trijicon RMR footprint optics, allowing low-profile secure mounting. A reinforced polymer cover plate is included if you don't mount an optic immediately.
Everything. The slide ships fully assembled with the barrel, front and rear sights, recoil spring assembly, and all internal small parts already installed. You only need to attach it to a compatible frame to complete your pistol.
Installation itself is straightforward, but Brownells notes that a channel liner is required for these slides—it's a press fit and requires a tool to install. Brownells recommends part #777-100-017 for this job.
