Loading...
Loading...
Loading...
Loading...
Bravo Company
The Bravo Company BCM Stock Riser Kit for Mod 3 gives you two precision height options to dial in your cheek weld exactly where you need it. This kit includes a pair of friction-fit risers—one at approximately .5" and another at .8"—designed specifically to work with the BCM Mod 3 stock. Whether you're setting up a rifle for electro-optics, low-power variable scopes, or passive night vision platforms, these risers let you achieve a consistent and repeatable sight picture without modifying your rifle's ergonomics.
What sets this riser kit apart is its configurability. Each riser can be mounted in any of six positions on your Mod 3 stock, and you can orient them forward or reverse depending on your cheek weld preference and optic height. That flexibility means you can fine-tune your rifle's handling whether you're running a magnified optic for precision work, a red dot for close-quarters shooting, or thermal glass for hunting at night. No gunsmithing required—just friction-fit installation that you can swap or adjust in seconds.
Built to BCM's standard of no-nonsense reliability, the stock riser kit is made for shooters and hunters who demand consistency. If you've got a Mod 3 stock and you're struggling to find your natural cheek weld with your current optic setup, these risers solve that problem without the cost or hassle of a new stock.
| Brand | Bravo Company |
| Product Type | Stock Riser Kit |
| Compatibility | BCM Mod 3 Stock |
| Riser Heights | Approximately .5" and .8" |
| Quantity Included | 2 Risers |
| Mounting Positions | 6 |
| Orientation | Forward or Reverse |
| Finish | Black |
| Installation | Friction-fit |
Yes. The BCM Stock Riser Kit for Mod 3 is designed specifically for BCM Mod 3 stocks and uses a friction-fit interface with that stock.
The kit includes two risers with approximately .5" and .8" heights, so you can choose the rise that matches your optic and cheek weld preference. You can also mix and match them across the six available mounting positions.
Yes. Each riser can be mounted in any of the six positions on the stock and oriented either forward or reverse, giving you significant flexibility to customize your sight picture and cheek weld geometry.
No. The risers use a friction-fit design, so installation is straightforward and requires no special tools or gunsmithing.
Bravo Company
The Bravo Company BCM Stock Riser Kit for Mod 3 gives you two precision height options to dial in your cheek weld exactly where you need it. This kit includes a pair of friction-fit risers—one at approximately .5" and another at .8"—designed specifically to work with the BCM Mod 3 stock. Whether you're setting up a rifle for electro-optics, low-power variable scopes, or passive night vision platforms, these risers let you achieve a consistent and repeatable sight picture without modifying your rifle's ergonomics.
What sets this riser kit apart is its configurability. Each riser can be mounted in any of six positions on your Mod 3 stock, and you can orient them forward or reverse depending on your cheek weld preference and optic height. That flexibility means you can fine-tune your rifle's handling whether you're running a magnified optic for precision work, a red dot for close-quarters shooting, or thermal glass for hunting at night. No gunsmithing required—just friction-fit installation that you can swap or adjust in seconds.
Built to BCM's standard of no-nonsense reliability, the stock riser kit is made for shooters and hunters who demand consistency. If you've got a Mod 3 stock and you're struggling to find your natural cheek weld with your current optic setup, these risers solve that problem without the cost or hassle of a new stock.
| Brand | Bravo Company |
| Product Type | Stock Riser Kit |
| Compatibility | BCM Mod 3 Stock |
| Riser Heights | Approximately .5" and .8" |
| Quantity Included | 2 Risers |
| Mounting Positions | 6 |
| Orientation | Forward or Reverse |
| Finish | Black |
| Installation | Friction-fit |
Yes. The BCM Stock Riser Kit for Mod 3 is designed specifically for BCM Mod 3 stocks and uses a friction-fit interface with that stock.
The kit includes two risers with approximately .5" and .8" heights, so you can choose the rise that matches your optic and cheek weld preference. You can also mix and match them across the six available mounting positions.
Yes. Each riser can be mounted in any of the six positions on the stock and oriented either forward or reverse, giving you significant flexibility to customize your sight picture and cheek weld geometry.
No. The risers use a friction-fit design, so installation is straightforward and requires no special tools or gunsmithing.
