Geissele Automatics High Optic Mount 1.93'' For Trijicon Mro DdcGeissele Automatics$160.00
Loading...
Loading...
Loading...
Loading...
Bravo Company
The Bravo Company AT Optic Mount in 1.93" height is purpose-built for shooters running a Trijicon MRO red dot on a rifle equipped with a Picatinny rail. This is a high co-witness mount designed to position your optic at the correct sight line for the MRO while maintaining the ability to use iron sights—ideal for carbines where you want redundancy and flexibility in your sight picture. BCM's Angled Torque (A/T) system uses a patented triangulating clamp design to lock down your optic with roughly twice the clamping force of traditional horizontal rail interfaces, which means your zero stays put under recoil and in the field.
Built from 7075-T6 billet aluminum with hard-coat anodizing to Mil-A-8625F specs, the mount weighs just over 2 ounces and keeps your sight profile clean and snag-free. The steel clamp hardware receives a Nitride hardening process for durability, and a serrated locking spring-washer on the shaft nut prevents loosening when you're running and gunning. BCM minimized moving parts here—fewer components mean fewer points of failure, which matters whether you're at the range, hunting, or running dynamic drills.
Every BCM AT mount ships as a complete, ready-to-install unit. The engineering is uncompromising: multiple integral recoil lugs manage forward and backward movement to preserve zero shot after shot. This is the kind of gear BCM has been making in America for decades—overbuilt, reliable, and backed by real-world testing.
| Mount Height | 1.93" (high co-witness) |
| Optic Compatibility | Trijicon MRO |
| Rail Interface | Picatinny |
| Material | 7075-T6 billet aluminum (body); hardened steel (clamp & hardware) |
| Finish | Hard-coat anodize (Mil-A-8625F); Nitride-hardened steel |
| Weight | Approximately 2.15 oz |
| Clamp Design | Patented Angled Torque (A/T) with triangulating force |
| Origin | Made in America |
Yes. This BCM AT mount is specifically designed for the Trijicon MRO red dot. The 1.93" height positions the optic for a high co-witness with iron sights on a standard rifle setup.
The 1.93" measurement is the distance from the top of your Picatinny rail to the optical center of the mounted optic. At this height, your MRO sits high enough to co-witness standard rifle iron sights, giving you a backup aiming reference if the optic fails.
The mount is compatible with any rifle that has a Picatinny (MIL-STD-1913) rail. However, it is optimized for the Trijicon MRO optic. Verify that your specific rail system accepts standard Picatinny clamps before purchasing.
The BCM AT Optic Mount ships as a complete unit, ready to install on your rifle's rail. All necessary hardware—including the clamp, fasteners, and locking spring-washer—is included.
Bravo Company
The Bravo Company AT Optic Mount in 1.93" height is purpose-built for shooters running a Trijicon MRO red dot on a rifle equipped with a Picatinny rail. This is a high co-witness mount designed to position your optic at the correct sight line for the MRO while maintaining the ability to use iron sights—ideal for carbines where you want redundancy and flexibility in your sight picture. BCM's Angled Torque (A/T) system uses a patented triangulating clamp design to lock down your optic with roughly twice the clamping force of traditional horizontal rail interfaces, which means your zero stays put under recoil and in the field.
Built from 7075-T6 billet aluminum with hard-coat anodizing to Mil-A-8625F specs, the mount weighs just over 2 ounces and keeps your sight profile clean and snag-free. The steel clamp hardware receives a Nitride hardening process for durability, and a serrated locking spring-washer on the shaft nut prevents loosening when you're running and gunning. BCM minimized moving parts here—fewer components mean fewer points of failure, which matters whether you're at the range, hunting, or running dynamic drills.
Every BCM AT mount ships as a complete, ready-to-install unit. The engineering is uncompromising: multiple integral recoil lugs manage forward and backward movement to preserve zero shot after shot. This is the kind of gear BCM has been making in America for decades—overbuilt, reliable, and backed by real-world testing.
| Mount Height | 1.93" (high co-witness) |
| Optic Compatibility | Trijicon MRO |
| Rail Interface | Picatinny |
| Material | 7075-T6 billet aluminum (body); hardened steel (clamp & hardware) |
| Finish | Hard-coat anodize (Mil-A-8625F); Nitride-hardened steel |
| Weight | Approximately 2.15 oz |
| Clamp Design | Patented Angled Torque (A/T) with triangulating force |
| Origin | Made in America |
Yes. This BCM AT mount is specifically designed for the Trijicon MRO red dot. The 1.93" height positions the optic for a high co-witness with iron sights on a standard rifle setup.
The 1.93" measurement is the distance from the top of your Picatinny rail to the optical center of the mounted optic. At this height, your MRO sits high enough to co-witness standard rifle iron sights, giving you a backup aiming reference if the optic fails.
The mount is compatible with any rifle that has a Picatinny (MIL-STD-1913) rail. However, it is optimized for the Trijicon MRO optic. Verify that your specific rail system accepts standard Picatinny clamps before purchasing.
The BCM AT Optic Mount ships as a complete unit, ready to install on your rifle's rail. All necessary hardware—including the clamp, fasteners, and locking spring-washer—is included.
